Proxima Desktop Projector DP5100 User Manual
USER’S GUIDE
Model DP5100
Proxima Corporation warrants that the Proxima® Desktop Projector™
product manufactured by Proxima is free from defects in materials and
workmanship under normal use during the Warranty Period. The Warranty
Period commences on the day of purchase by the end–user. The Warranty
Period is one year. The Desktop Projector lamps are not covered by this
Warranty.
The end–user’s sales receipt or invoice showing the date of purchase of the
product and the name of the Reseller is proof of date of purchase. The
Warranty extends only to the original purchaser and is not transferable.
During the Warranty Period, Proxima will, at no additional charge, repair or
replace defective parts or at the option of Proxima, replace the entire unit.
This limited Warranty does not extend to any Proxima product that has been
damaged or been rendered defective (a) as a result of accident, misuse or other
abuse; (b) by the use of parts not manufactured or sold by Proxima; (c) by
modification of the product; or (d) as a result of servicing by non–authorized
personnel.
The foregoing Warranty is expressly in lieu of any other expressed or implied
warranties, including, without limitation, warranties of merchantability or
fitness for a particular purpose. To the extent not prohibited by law, all
statutory warranties are hereby waived and excluded from this Warranty.
Proxima expressly disclaims all warranties not stated in this Limited Warranty.
Warning: This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction
manual, may cause interference to radio communications. It has been tested
and found to comply with limits for a Class “A” computing device pursuant
to Subpart B of Part 15 of the FCC Rules, which are designed to provide
reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to
cause interference in which case the user, at his own expense, will be required
to take whatever measures may be necessary to correct the interference.
Proxima is a registered trademark of Proxima Corporation. Desktop Projector
and trade dress are trademarks of Proxima Corporation. IBM is a registered
trademark of International Business Machines Corporation. Macintosh is a
registered trademark of Apple Computer, Inc. Other trademarks are the
property of their respective owners. U.S. and foreign patents are pending.
© Copyright 1995 Proxima Corporation. All rights reserved. Specifications
are subject to change without notice.
7/95
Warranty
Limitation of
Warranties
FCC
Statement
Trademarks,
Patents, and
Copyright
Introduction .................................................................... 1–1
What’s in the Box?...........................................................1–2
Quick Setup Desktop Computers .................................... 1–3
Quick Setup Laptop and Notebooks ............................... 1–4
Your Proxima Desktop Projector ..................................... 2–1
Setting up the Projector ................................................... 2–2
Connecting the Desktop Projector ..................................2–3
COMPUTER (RGB)............................................... 2–4
VIDEO IN............................................................... 2–6
S–VHS ..................................................................... 2–7
COMPUTER AUDIO IN....................................... 2–7
AUDIO IN ..............................................................2–8
AUDIO System........................................................ 2–9
Powering Up ................................................................... 2–9
Applying Power to the Projector .............................. 2–9
Turning On/Off the Lamp..................................... 2–10
Projecting the Image ...................................................... 2–11
Image Size ..............................................................2–11
Image Sizing and Focusing ..................................... 2–12
Keystoning .............................................................2–12
The Control Panel ........................................................... 3–1
Control Panel Keys .......................................................... 3–2
STANDBY/ON Key ................................................3–2
INPUT Key ............................................................. 3–2
ZOOM Key .............................................................3–2
FOCUS Key............................................................. 3–2
Control Panel Indicators..................................................3–3
TEMP Indicator....................................................... 3–3
LAMP Indicator ....................................................... 3–4
ON Indicator ...........................................................3–4
Contents
Chapter 1
Introducing the
Proxima
®
Desktop
Projector™
Chapter 2
Detailed Setup
Chapter 3
Using the
Desktop
Projector
Remote Control............................................................... 3–5
STANDBY/ON Key ................................................ 3–6
RESET Key .............................................................. 3–6
CALL Key ................................................................3–6
INPUT SELECT Keys............................................. 3–6
ZOOM Key ............................................................. 3–7
FOCUS Key............................................................. 3–7
MENU Keys ............................................................ 3–7
VOLUME Keys ....................................................... 3–8
MUTE Key .............................................................. 3–8
CHANGE Keys ....................................................... 3–8
BLUE BACK Key .................................................... 3–8
LIGHT Key (on side of remote control) .................. 3–8
Menus ............................................................................. 3–9
Displaying the Menu................................................ 3–9
Selecting and Changing Settins ................................ 3–9
Saving Changes ........................................................ 3–9
Computer (RGB) Video Menu .............................. 3–10
Video Menu ........................................................... 3–11
Lens Cleaning .................................................................. 4–1
General Maintenance....................................................... 4–2
Replacing the Lamp ................................................. 4–2
Cleaning the Air Filter.............................................. 4–3
Changing the Remote Control’s Batteries ................ 4–5
Temperature Extremes ............................................. 4–5
Troubleshooting Chart .................................................... 5–1
Where to Get Help .......................................................... 5–4
Appendix A
Specifications
Appendix B
Accessories & Replacement Parts
Index
Chapter 4
Maintenance
Chapter 5
Troubleshooting
User’s Guide • 1–1
Chapter 1 • Introducing the Proxima
®
Desktop Projector
Chapter 1
Introducing
the Proxima
Desktop
Projector
The Proxima® Desktop Projector™ Model DP5100 is a portable,
color data and video LCD desktop projection product that makes
sharing data and presenting information as easy as connecting
your computer to your monitor.
800
600
400
200
0
APR
MAY
JUN
JUL
800
600
400
200
0
APR
MAY
JUN
JUL
FOCUS
NF
ZOOM
W
T
INPUT
STANDBY
/ON
ON
LAMP
TEMP
Figure 1-1
The Proxima Desktop Projector DP5100 in use
1–2 • User’s Guide
Chapter 1 • Introducing the Proxima
®
Desktop Projector
After you’ve opened the box and removed the Desktop Projector,
make sure you have all the items shown in Figure 1-2.
CAUTION! The Desktop Projector 5100 should be treated
like any other precision optical instrument. Handle it carefully.
Proxima Desktop
Projector
Remote control
Power cord
VGA video cable
Macintosh video
cable adaptor
Also included but not shown:
• (2) AA alkaline batteries
• User's Guide
• Product Registration Card
Composite
audio/video cable
TINPUT
STANDBY
/ON
W
VIDEO
RGB
MENU
VOL
F
RESET
CALL
N
FOCUSZOOMRGB
1/2
VIDEO
1/2
MENU
MENU
H
CHANGE
BLUE
BACK
V
VOL
MUTE
Figure 1-2
Items included with the Desktop Projector 5100
What’s in the
Box?
User’s Guide • 1–3
Chapter 1 • Introducing the Proxima
®
Desktop Projector
Quick Setup:
Desktop
Computers
Here are the steps you follow to connect your PC or Macintosh to
the projector (to connect to a laptop or notebook computer,
follow the instructions on the next page). Each step is described in
detail in Chapter 2.
1. Place the projector on a solid, flat surface, at a right angle
(perpendicular) to the projection screen, parallel to the floor.
2. Remove the lens cover.
3. Turn off the computer, the monitor, and the projector.
4. Unplug the monitor cable from the video monitor port on
your computer.
5. If you are using a Macintosh,
a) Connect the Macintosh video cable adaptor (supplied with
the projector) to either end of the DP5100 VGA video
cable.
b) Plug the other end of the Macintosh video cable adaptor
into the Macintosh’s video output (monitor) port. Skip
ahead to step 7.
6. To connect to a PC, plug one end of the DP5100 VGA video
cable into the computer’s video output (monitor) port.
7. Plug the other end of the DP5100 VGA video cable into the
projector’s COMPUTER (RGB) 1 or 2 port.
8. To connect additional video and audio sources to the
projector, see pages 2-6 through 2-9.
9. Turn on the projector, then turn on your computer and
monitor.
Macintosh Video
Cable Adaptor
1
2
RGB
VGA video cable
1–4 • User’s Guide
Chapter 1 • Introducing the Proxima
®
Desktop Projector
To connect the projector to your laptop or notebook computer,
follow these instructions. Each step is described in detail in
Chapter 2.
1. Place the projector on a solid, flat surface, at a right angle
(perpendicular) to the projection screen, parallel to the floor.
2. Remove the lens cover.
3. Turn off the computer and the projector.
4. If you have a PC laptop, skip ahead to step 5. To connect to a
Macintosh laptop, you will use two additional cables:
a) Plug the laptop video adaptor cable (supplied with the
laptop) into the laptop.
b) Connect one end of the Macintosh video cable adaptor
(supplied with the projector) to the laptop video adaptor
cable.
c) Connect the other end of the Macintosh video cable
adapter to either end of the DP5100 VGA video cable.
Skip ahead to step 6.
5. To connect to a PC laptop, plug one end of the DP5100
VGA video cable into the computer’s video output (monitor)
port.
6. Plug the other end of the DP5100 VGA video cable into the
projector’s COMPUTER (RGB) 1 or 2 port.
7. To connect additional video and audio sources to the projector, turn to pages 2-6 through 2-9.
8. Turn on the projector, then turn on your computer.
Quick Setup:
Laptop and
Notebooks
1
2
RGB
Macintosh Video
Cable Adaptor
VGA video cable
User’s Guide • 2–1
Chapter 2 • Detailed Setup
Chapter 2
Detailed
Setup
Your Proxima
Desktop
Projector
Before you begin, examine the components of the projector.
3
FOCUS
N F
ZOOM
W
T
INPUT
STANDBY
/ON
ON
LAMP
TEMP
TINPUT
STANDBY
/ON
W
VIDEO
RGB
MENU
VOL
F
RESET
CALL
N
FOCUSZOOMRGB
1/2
VIDEO
1/2
MENU
MENU
H
CHANGE
BLUE
BACK
V
VOL
MUTE
4
5
1
2
10
6
7
8
9
Figure 2-1
The Proxima Desktop Projector and Remote Control
(1) Control panel
(2) Air exhaust (at rear)
(3) Connector panel
(4) AC power switch
(5) Power cord receptacle
(6) Air intake filter (on bottom)
(7) Projection lens assembly
(8) Internal speaker
(9) Handle
(10) Remote control
2–2 • User’s Guide
Chapter 2 • Detailed Setup
Setting up the
Projector
Setting Up the Projector
1. Place the projector on a solid, flat surface. The projector
should be located at a right angle (perpendicular) to the
projection screen and parallel to the floor.
FOCUS
NF
ZOOM
W
T
INPUT
STANDBY
/ON
ON
LAMP
TEMP
Projection Screen
Figure 2-2
Positioning the Desktop Projector, top view and side view
Note: If you're using a media cart, make sure the wheels are
locked to prevent it from moving.
2. Remove the lens cover.
User’s Guide • 2–3
Chapter 2 • Detailed Setup
Connecting
the projector
Take a moment to look at the projector's rear connector panel.
CONTROL
1
2
1
2
S–VIDEO VIDEO AUDIOLR
AUDIORGB
AC
IN
LR
1
9
32
5
4
67
8
Figure 2-3
The Connector Panel
Item Description
1 S-Video inputs Input from S-VHS or S-video
source
2 Video inputs NTSC/PAL input from VCRs,
laserdisc players, and camcorders
3 Audio inputs
(from video
sources)
Left and right inputs from VCR or
other audio source, or amplified or
wireless microphone
4 Control Not used
5 Computer
(RGB) Audio
inputs
Left and right inputs from
computer audio source, or
amplified or wireless microphone
6 ON/OFF switch Main power ON/OFF switch
7 Power jack Input power connector
8 RGB
(Computer)
Video inputs
Connects computer video sources
to the projector
9 Video input -
BNC
BNC-style connector for NTSC/PAL
input; Video 2 input source only
2–4 • User’s Guide
Chapter 2 • Detailed Setup
MacintoshVGA
Macintosh Video
Cable Adaptor
1
2
RGB
Connecting to your Computer
You use the VGA video cable to connect your computer to the
DP5100.
Note: If you want to connect your monitor to the computer
while the projector is hooked up, you must order the optional
distribution amplifier. See Appendix B for information.
Desktop Computers
If you are using a desktop computer, regardless whether it’s a PC
or a Macintosh, the process of connecting it to the projector is the
same. Use the VGA video cable (and the Macintosh video cable
adaptor as necessary).
Figure 2-4
VGA and Macintosh connectors
1. Turn off power to the computer, monitor, and the projector.
2. Unplug your monitor cable from your computer’s video
monitor port.
3. To connect to a Macintosh, plug one end of the Macintosh
video cable adaptor into the Macintosh’s video output
(monitor) port. Connect the other end of the Macintosh video
cable adaptor to either end of the DP5100 VGA video cable.
Skip ahead to step 5.
4. To connect to a PC, plug one end of the DP5100 VGA video
cable into the computer's video output (monitor) port.
5. Plug the other end of the DP5100 VGA video cable into the
projector's COMPUTER (RGB) 1 or 2 port.
VGA video cable
User’s Guide • 2–5
Chapter 2 • Detailed Setup
COMPUTER
/VGA
FOCUS
N F
ZOOM
W
T
INPUT
STANDBY
/ON
ON
LAMP
TEMP
Figure 2-5
Computer video connections
Notebooks/Laptops
1. Turn off power to the computer and the projector.
2. If you are using a Macintosh laptop,
a) Plug the laptop video adaptor cable (supplied with the
laptop) into the laptop.
b) Connect one end of the Macintosh video cable adaptor
(supplied with the projector) to the laptop video adaptor
cable.
c) Connect the other end of the Mac video cable adaptor to
one end of the DP5100 VGA video cable. Skip to step 4.
3. To connect to a PC laptop, plug one end of the DP5100 VGA
video cable into the computer's video output (monitor) port.
4. Plug the other end of the DP5100 VGA video cable into the
projector's COMPUTER (RGB) 1 or 2 port.
Note: If you can’t project an image at the same time that the
laptop displays an image, see your laptop's manuals for instructions on switching between the internal screen and the video port.
1
2
RGB
Macintosh Video
Cable Adaptor
VGA video cable
2–6 • User’s Guide
Chapter 2 • Detailed Setup
Special Configurations
If your computer has an internal monitor but does not have
external video capabilities (Macintosh SEs and certain
PowerBooks), you need a video adapter card in order to attach to
the Desktop Projector. Setup for a third-party adapter is identical
to the procedures outlined in the section titled Desktop Computers.
Contact your dealer, Proxima Customer Service, or a third-party
supplier for information on video adapters.
Connecting Audio from the Computer
The RGB (COMPUTER) AUDIO IN ports allow audio input
from two separate computers or microphones.
1. Insert the mini jack end of a computer audio cable (not
supplied; call your dealer for information) into the AUDIO
OUT port of a Macintosh or the sound card of a PC.
2. Insert the RCA jacks at the other end of the computer audio
cable into the projector’s left and right RGB (COMPUTER)
AUDIO ports.
Connecting Video from a VCR
The Desktop Projector 5100 can project video from NTSC or
PAL sources (VCRs, laserdisc players, and camcorders).
AUDIOLR
User’s Guide • 2–7
Chapter 2 • Detailed Setup
S–VIDEO VIDEO L
Composite
audio/video cable
VIDEO RECORDER – VCR
VIDEO OUT
AUDIO OUT
Figure 2-6
The Desktop Projector connected to a video source
To connect an NTSC or PAL source to your projector:
1. The composite audio/video cable is made up of 3 cables with
yellow, red, and white RCA plugs. Insert the yellow RCA plug
into the circular port on your camcorder, laserdisc player, or
VCR marked VIDEO OUT, TO MONITOR, or something
similar.
2. Insert the other yellow RCA plug into the projector's VIDEO
1 or 2 port.
The red and white cables are for audio input from the video
source. Refer to the section Connecting audio from a VCR.
Connecting to S–VHS Video Sources
The Desktop Projector 5100 can project video from an
S–VHS or S–Video source.
Loading...