
ANT-122-S02
Low Profile MIMO 4G/LTE Omni Screw-Mount Antenna
Data Sheet: Rev A 05/18/19
© Proxicast, LLC. All rights reserved.
Disclaimer: Subject to change without notice
www.proxicast.com • 1-877-777-7694
•
Kiosks
•
Vending M ac h i nes
•
Digital Signage
•
Video Surveillance
•
Point-of-Sale Terminals
•
SCADA / Telemetry / PLCs
•
2 MIMO Elements in Si ng l e Ra dome
•
Ultra Low Profile ~ 0.6 inches Tall
•
Vandal Resistant & Weatherproof
•
Compatib l e wi t h al l 3G & 4G/LTE Net w o rks
•
Compatible with most Cellular Modems/ Routers
•
2.5 dBi Peak Gain
•
Omni-Directional
ANT-122-S02
Proxicast Ultra Low Profile
MIMO 4G / LTE OmniDirectional Screw-Mount
Antenna
•
SMA Male Connectors on 6 ft Low-Loss Coax
This extremely low profile (< 0.6 inches tall) fixed mount omni-directional antenna provides up to 2.5 dBi of gain
and works on all 3G & 4G cellular frequency bands worldwide (all CDMA, GSM, WCDMA/UMTS and LTE
carriers) including AT&T, Verizon, Sprint, T-Mobile, Bell, Rogers and Telus.
Permanently mounts via a 1/2 in. (12 mm) hole with locking internal nut. Resists vandalism with no exposed
coax cable. Includes 6 ft of low-loss coax fed through center mounting post.
Completely waterproof (IP67) when properly installed with post extending into a water-tight enclosure. .
Designed for M2M applications such as vending machines, meter housings, equipment sheds, or other locations
requiring an inconspicuous low-profile external antenna. Can also be vehicle mounted for buses, vans, trucks or
other mobile installations.
Dual integrated SMA male plug connectors mate with SMA female jacks on MIMO capable modems, routers,
etc.
For optimum performance this antenna should be mounted through a flat, horizontal metal surface at least 8

ANT-122-S02
Low Profile MIMO 4G/LTE Omni Screw-Mount Antenna
Data Sheet: Rev A 05/18/19
© Copyright Proxicast, LLC. All rights reserved.
Disclaimer: Subject to change without notice
www.proxicast.com • 1-877-777-7694
8 inch (20 cm) diameter min
6 ft (2 m) of LMR RG174 low-loss coax
Mounting post: 0.47 inches (12 mm)
10 to 55Hz with 1.5mm amplitude 2hours
IP67 (waterproof) RoHS compliant
Mechanical Specifications
Electrical Specifications
Frequency Range
Height
Diameter
698-960 / 1710-2700 MHz
includes all 2G, 3G, 4G, LTE Bands
Radome: 0.6 inches (15 mm) above mounting surface
Overall: 1.2 inches (30 mm)
Radome: 3.2 inches (81.3 mm)
Radome: UV stabilized ABS plastic
Materials
Connector: Brass with Nickel plating
Adhesive Pad: Urethane Foam
Operation of this device outside the parameter ranges given above may cause permanent damage.

ANT-122-S02
Low Profile MIMO 4G/LTE Omni Screw-Mount Antenna
Data Sheet: Rev A 05/18/19
© Copyright Proxicast, LLC. All rights reserved.
Disclaimer: Subject to change without notice
www.proxicast.com • 1-877-777-7694

ANT-122-S02
Low Profile MIMO 4G/LTE Omni Screw-Mount Antenna
Data Sheet: Rev A 05/18/19
© Copyright Proxicast, LLC. All rights reserved.
Disclaimer: Subject to change without notice
www.proxicast.com • 1-877-777-7694
Horizontal (Azimuth) Plane
Vertical (Elevation) Plane
800 MHz

ANT-122-S02
Low Profile MIMO 4G/LTE Omni Screw-Mount Antenna
Data Sheet: Rev A 05/18/19
© Copyright Proxicast, LLC. All rights reserved.
Disclaimer: Subject to change without notice
www.proxicast.com • 1-877-777-7694
Horizontal (Azimuth) Plane
Vertical (Elevation) Plane
1850 MHz

ANT-122-S02
Low Profile MIMO 4G/LTE Omni Screw-Mount Antenna
Data Sheet: Rev A 05/18/19
© Copyright Proxicast, LLC. All rights reserved.
Disclaimer: Subject to change without notice
www.proxicast.com • 1-877-777-7694
Horizontal (Azimuth) Plane
Vertical (Elevation) Plane
2700 MHz

ANT-122-S02
Low Profile MIMO 4G/LTE Omni Screw-Mount Antenna
Data Sheet: Rev A 05/18/19
© Copyright Proxicast, LLC. All rights reserved.
Disclaimer: Subject to change without notice
www.proxicast.com • 1-877-777-7694
Installation Instructions
• Position away from:
CRT/TVs
Lighting fixtures & motors
Other antennas & wireless devices
Low-E or tinted/c oat ed win do ws
Large vertical metal or concrete objects
• Drill a 1/2” (12mm) hole in flat horizontal surface
• Remove mounting nut & washer and feed coax cable through hole
• Remove bottom plastic liner to expose adhesive
• Press antenna into hole and tighten nut & washer from underneath
• Optionally apply a thin bead of silicone caulk around the antenna rim
• Keep total coax lead cable as short as possible & weatherproof all outdoor connectors
Contact Information
For the latest specifications, additional product information, worldwide sales and information about
Web: www.proxicast.com Tel: 1-877-777-7694
Email:
Proxicast • 312 Sunnyfield Drive, Suite 200 • Glenshaw, PA 15116 USA
For technical questions and application information:
Email
sales@proxicast.com 1-412-213-2477
:
support@proxicast.com
Proxicast:
Important Notice
The information contained herein is believed to be reliable. Proxicast makes no warranties regarding the information contained
herein. Proxicast assumes no responsibility or liability whatsoever for any of the information contained herein.
Proxicast assumes no responsibility or liability whatsoever for the use of the information contained herein. The information
contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is
entirely with the user.
The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent
rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by
such information. Proxicast products are not warranted or authorized for use as critical components in medical, life-saving, or
life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
All information contained herein is subject to change without notice.