To prevent from fire or shock hazard,do not expose monitor to any rain or any form of water.High voltage is
inside the monitor so please do not remove the back cover of the cabinet if you are not a qualified monitor
engineer.Contact the local dealer or the nearest
A. IMPORTANT SAFETY INSTRUCTION
Prior to using this service manual,please ensure that you have carefully followed all the procedures outlined in
the user's manual for this product.
1.
Read all of these instructions.
2.
Save these instructions.
3.
Follow all warnings and instructions a marked on the product.
4.
Unplug this product from the wall outlet before cleaning.Do not use liquid cleaners or aerosol
cleaners, use a damp cloth for cleaning.
5.
Do not use this product near water.
6.
Do not place this product on an unstable cart,stand or tablle.The product may fall,causing serious
damage to the product.
7.
Slots and openings in the cabinet and the back or bottom are provided for ventilation,to ensure
reliable operation of the product and to protect it from overheating,those openings must not be
blocked or covered.The openings should never be blocked by placing the product on a bed,sofa, rug,
or other similar surface.This product should not be placed in a built-in installation less proper
ventilation is provided.
8.
This products should be operated from the type of power source indicated on the marketin label.
If you are not sure of the type of power available, consult your dealer or local power company
9.
This product is equipped with a 3-wire grounding type plug,a plug having a third (grounding)
pin.This plug will only fit into a grounding-type power outlet.This is a safety feature,if you are
unable to insert the plug into the outlet,contact your electrician to replace your obsolete outlet.Do
not defeat the purpose of the grounding-type plug.
10.
Do not allow anything to rest on the power cord.Do not locate this product where persons will walk
on the cord.
11.
If an extension cord is used with this product,make sure that the total of the ampere ratings on the
product plugged into the extension cord to the waplugged into outlet does not exceed 15 ampere.
12.
Never push objects of any kind into this product through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in a risk of fire or electric shock.Never spill liquid
of any kind on the product.
13.
Do not attempt to service this product yourself,as opening or removing covers may expose you to
dangerous voltage points or other risks.Refer all servicing to service personnel.
14.
Unplug this product from the wall outlet and refer servicing to qualified service personnel under the
following conditions.
a.
When the power cord or plug is damaged or frayed.
b.
If liquid has been spilled into the product.
c.
If the product has been exposed to rain or water.
d.
If the product does not operate normally,when the operating instructions are followed.Adjust
only those controls that are covered by the operating instructions since improper adjustment of
other controls may result in damage and will often require extension work by a qualified
technician to restore the product to normal operation.
e.
If the product has been dropped or the cabinet has been damaged.
f.
If the product exhibits a distinct change in performance,indicating a need for service.
1. Plug power cable into the adapter, check adapter
power indicator light up green.
2. Make sure the voltage of the power plug (
on the main
to the value shown at right.
PCB
CN7
)
Check
Value
12.0V
±0.2V
Power Savin
Check
B
Into Factory
mode
C
Auto mode
Check
D
White
Balance
Adjust
E
OSD
F
Language
Setting
﹟Wattmeter
﹟PC or Pattern
generator
﹫Crosshatch Pattern
(31.5KHz,640x480)
﹟PC or Pattern
generator
﹫Crosshatch Pattern
(31.5KHz,640x480)
﹟PC or Pattern
generator
﹫Crosshatch Pattern
(1024x768/60Hz)
﹟
PC or Pattern
generator
﹫White Pattern
(1024x768/60Hz)
﹟
PC or Pattern
generator
1. Unplug the signal cable into the monitor.
2. Turn the power switch of the monitor
ON
.
3. Check monitor power indicator light up orange.
4. Make sure the wattmeter value shown at right.
5.
will be display “
OSD
NO SIGNAL
” Picture.
1. Hold ‹ key,then turn the power switch of the
monitor
OFF
.
2. Hold › key,then turn the power switch of the
monitor
ON
.
3. You can into factory adjustment mode.
1. Press and relese the
menu.
OSD
2. Move the
OSD
to the
MENU
knob to activate the
function,press
AUTO
MENU
key auto adjuat display mode to its utmost
performance according to
VGA
setting.
3. In the event of the display image needs further
adjustment
1. Move the
OSD
to the
2. set color is 9300
COLOR mode
using the
°K
(
AUTO COLOR
,Check the value
OSD
shown at below.
Y = 220 x = 0.283 y = 0.297
3. set color is 6500
using the
°K
,Check the value
OSD
shown at right.
Y = 220 x = 0.311 y = 0.329
1. Move the
OSD
to the
LANGUAGE mode
.
2. You can choose one of the eight language you need.
‹ 5W
Y = 220
).
±0.1FL
x = 0.283
±0.01
y = 0.297
±0.01
LCD service manual. Page 12 of 12 唯冠科技研發部
Page 13
唯冠科技(深圳)有限公司
G. TROUBLE SHOOTING HINTS
NO NO
YES YES
No Display
( Black )
LED ON
?
Power
adapter ?
Change
adapter
Push the power
ON/OFF
switch
YES YES
LED Color
change ?
NO NO
High Voltage !
NO
YES
YES
NO NO
YES
Check main
board U2/Pin2
Hi / Lo under
push power
To Step 2
A
Back light
ON?
Check the
CN1
/Pin1
of Inverter
+12V ?
Check
F1(Fuse) of inverter
To Step 2
Make sure the
connection of
Inverter is fine
Display ?
OK !
B
LCD service manual. Page 13 of 13 唯冠科技研發部
Page 14
唯冠科技(深圳)有限公司
NO
A
Check the
connection of
YES
YES
NO
YES
NO
cable
CN8
Display ?
Change the
main board
OK !
B
Hi / Lo under
push power
Change the
Inverter
Display ?
Change the
main board
OK !
To Step 2
LCD service manual. Page 14 of 14 唯冠科技研發部
Page 15
唯冠科技(深圳)有限公司
Step 2
NO
YES
NO
YES
YES
YES
Check the main
board
12V
?
+5.0 V ?
Check the main
board
U5 / Pin 3
?
Check
F1,D5
Check
U9,U11,R43
Check
U5
NO
H/V input
Signal ?
Check
YES
H/V Signal
NO
YES
Display ?
OK !
Change
U8
Change
Signal Cable
LCD service manual. Page 15 of 15 唯冠科技研發部
Page 16
唯冠科技(深圳)有限公司
No display
(White)
NO
YES
NO
Check the main
board 5V ?
U9,U11,R43
+3.3V ?
YES
NO
Check the main
YES
YES
board
U8/Pin1
H/V Input
Signal ?
?
3.3V Circuit
Check
Check
U7,U12
Check
Change
U8
NO
Check
H/V Signal
NO
YES
Display ?
OK !
Change
Signal Cable
LCD service manual. Page 16 of 16 唯冠科技研發部
Page 17
唯冠科技(深圳)有限公司
H. REPLACEMENT PARTS LIST
PS576
10 988-1P0-1004C X EA 1.0000 02/11/11 0.000
PS-576 包裝材料+TCO99 SANYO
INTER DATA
1 002-001-TCO9 P EA 1.0000 01/07/26 0.000
TCO99 宣告書 (全機種).
2 002-000-PS576 P EA 1.0000 02/07/10 0.000
PS576 英文說明書㆗性
4 005-002-PS576 P EA 1.0000 02/07/10 0.000
PS576 CARTON.PROVIW 分離式
5 153-000-PS576 P EA 1.0000 02/07/10 0.000
PS576 BACK LBL ㆗性 英文
TCO99 MADE IN CHINA
6 003-H01-AS576 P EA 1.0000 01/12/04 0.000
TCO99 LBL FOR PLANE
7 170-000-0848C P EA 1.0000 01/11/30 0.000
PE BAG 0.07mm 14*30.5cm.
8 170-005-VM541 P EA 1.0000 02/07/10 0.000
LT-541 PE BAG 夾鏈袋 300*200mm.
9 170-005-LCD5 P EA 1.0000 01/11/30 0.000
LCD 15" PE BAG 五國語言分離整機
10 826-000-PS576 X EA 1.0000 01/07/26 0.000
PS-576 系列包材共同料分籬式無外
箱貼紙
40 160-00L-PS576 P EA 1.0000 01/08/13 0.000
POLYFOAM 保利龍.(L)分離式
50 160-00R-PS576 P EA 1.0000 01/07/26 0.000
POLYFOAM 保利龍.(R)分離式
11 846-120-C0AL-AT P EA 1.0000 02/09/03 0.000
ADAPTER 12V 3A 36W 低功率透明線
白色
21 002-001-CEPOV-B P EA 1.0000 02/10/15 0.000
CE 宣告書(FOR PROVIEW)內容修改.
+機種
31 003-001-EDC P EA 1.0000 02/11/07 0.000
銅版紙 55X35mm.
41 003-002-0848-AM X EA 1.0000 02/11/21 0.000
CARTON LABEL 70*40mm.
10 003-002-0848-A P EA 1.0000 02/08/03 0.000
CARTON LABEL 70*40mm.
20 835-014-0ALL P RL 0.0002 02/08/03 0.000
普通 黑色碳帶 80*300mm.
LCD service manual. Page 17 of 17 唯冠科技研發部
Page 18
唯冠科技(深圳)有限公司
51 002-G00-LPROVIEW P EA 1.0000 02/12/12 0.000
LCD 機種保証卡 PROVIEW EDC 客㆟用
20 999-P04-PS576 X EA 1.0000 02/11/11 0.000
PS576 TUV/GS TCO99 包前成品 INTE
R DATA
1 902-PS0-1003C X EA 1.0000 02/05/27 0.000
PS-576 TUV/GS/CE TCO99 框架 PANE
INTER DATA
10 151-001-PS576 M EA 1.0000 02/09/18 0.000
PS576 REAR CABINET ABS. (黑色)
EM-006E
10 154-002-ABS6E P KG 0.3300 02/09/12 0.000
塑膠原料 ABS HB(非防火)EM-006E
T23022(黑色)
20 110-4R0-20646 P EA 2.0000 02/09/12 0.000
銅螺母 M4*H8*Φ6.6mm
20 154-001-PS576 P EA 1.0000 02/09/18 0.000
PS576 KEY TOP ABS.
30 154-002-PS576 P EA 1.0000 02/09/18 0.000
PS576 LENS PC.
40 121-000-PS576 P EA 1.0000 02/09/18 0.000
PS576 REAR PLATE SECC 1.0T.
50 126-000-AS576-A P EA 1.0000 02/09/18 0.000
AS576 HINGE STEELNESS.
插件位置: 鎖底座,
70 123-B01-PS576P M EA 1.0000 02/09/18 0.000
PS576 FRONT PANEL AL5052P 0.8T
PROVIEW LOGO 烤漆
10 123-100-PS576 M EA 1.0000 02/07/18 0.000
PS576 FRONT PANEL AL5052P 0.8T
絲印功能鍵 AU ㆗性
10 123-B00-PS576P P EA 1.0000 02/07/18 0.000
PS576 FRONT PANEL AL5052P 0.8T
AU PANEL 空白烤漆
20 MISC-S00-SYIN P EA 1.0000 02/11/11 0.000
面框絲印費.
20 MISC-S00-SYIN P EA 1.0000 02/07/18 0.000
面框絲印費.
80 827-001-PS576 X EA 1.0000 02/09/18 0.000
PS-576 LCD 框架組立共同料 AU*5
10 100-008-3013 P EA 2.0000 02/07/10 0.000
SCREW R3*8mm TP1 PRO 2K 700.
20 100-010-4033 P EA 2.0000 02/07/10 0.000
LCD service manual. Page 18 of 18 唯冠科技研發部
Page 19
唯冠科技(深圳)有限公司
SCREW P4*10 ISO 鍍 NI.
30 101-005-2032 P EA 4.0000 02/07/10 0.000
SCREW M2*5 ISO 鍍五彩.
40 101-005-3032 P EA 6.0000 02/07/10 0.000
SCREW M3.0*5 ISO 鍍五彩.
50 101-005-3033 P EA 4.0000 02/10/05 0.000
SCREW M3*5 ISO 鍍 NI.
60 103-006-4033 P EA 1.0000 02/08/15 0.000
SCREW F4*6mm ISO ZI3C-NI.
70 105-006-3012 P EA 2.0000 02/07/10 0.000
SCREW T3*6mm TP1.
80 105-006-4033-1 P EA 2.0000 02/07/10 0.000
SCREW T4*6mm ISO 鍍鎳 耐落
90 105-010-3012 P EA 4.0000 02/07/10 0.000
SCREW T3*10mm TP1.
100 110-4R0-20646 P EA 2.0000 02/10/05 0.000
銅螺母 M4*H8*Φ6.6mm
110 154-002-AS576 P EA 1.0000 02/08/15 0.000
AS576 MYLAR SHEET T=0.5mm
120 154-003-AS576 P EA 1.0000 02/09/09 0.000
AS576 MYLAR SHEET 168*126
130 506-178-E62BP-40 P EA 1.0000 02/07/10 0.000
SMD CPU IC(WINBOND:W78E62BP-40
插件位置: P1,
140 631-003-A014-C P EA 1.0000 02/09/06 0.000
AUDIO 透明線 3.5STERE0 變為 2*RCA
1.5M CORE
插件位置: EMI,
150 631-006-7020-T P EA 1.0000 02/07/10 0.000
SH570/770 絞線 1061#28 6P2.0mm
160 631-008-G020-W P EA 1.0000 02/07/11 0.000
8PIN 1.5PITCH<->8PIN 1.5PITCH
插件位置: CTR/B->M/B,
170 631-030-F0003 P EA 1.0000 02/07/10 0.000
30P FFC CABLE L20CM T28mm.
插件位置: FFC2,
180 631-045-F0003 P EA 1.0000 02/07/10 0.000
45P FFC CABLE L20CM T28mm.
插件位置: FFC1,
200 824-002-AY565 P EA 1.0000 02/10/25 0.000
SPK BOX 20*40 2W 8ohm. ECN-2A0110
210 831-300-0101 P EA 1.0000 02/09/09 0.000
PS576 按鍵雙面膠(日東 5000NS)
LCD service manual. Page 19 of 19 唯冠科技研發部
Page 20
唯冠科技(深圳)有限公司
220 831-750-0500 P RL 0.0320 02/09/09 0.000
醋酸膠布寬 50mm 黑色
230 003-H01-LCD P EA 1.0000 02/10/14 0.000
LCD CPU LBL 15mmx15mm.
240 83X-000-LCDF X EA 1.0000 02/11/07 0.000
LCD MONITOR 成品段輔料.
1 831-409-0200 P RL 0.0084 02/05/29 0.000
單面膠 9mm*20 碼 (透明).
2 831-119-0501 P RL 0.0250 02/05/29 0.000
PVC 黑色電氣膠帶 UL206W19MM 卷狀
3 832-003-0002 P BOT 0.0050 02/05/29 0.000
酒精 99.5%.1kg/瓶
4 832-002-0001 P KG 0.0090 02/05/29 0.000
去漬油㆗國石油 1 桶 200 公升.
5 831-460-0201 P RL 0.0040 02/05/29 0.000
TAPE (FOR PACKING) 60mm.
6 836-600-0000 P EA 0.0004 02/05/29 0.000
玻璃擦拭布 MINIMAX 24*24cm 100p
16 003-501-ALL9 P EA 1.0000 02/08/12 0.000
ALL LCD 流程卡 10.8*7.5CM(白底黑 ECN-280083
250 126-060-ALP1 P EA 1.0000 02/11/14 0.000
導電鋁箔 L210*W60mm
260 126-030-ALP P EA 2.0000 02/11/14 0.000
導電鋁箔 150X30mm.
90 820-010-5PST X EA 1.0000 02/09/18 0.000
PS576 STAND 組品 鑄鋁合金
10 123-700-PS576 P EA 1.0000 02/10/05 0.000
PS576 BASE(鑄鋁合金).
20 155-001-PS576 P EA 5.0000 02/09/18 0.000
RUBBER FOOT(NR).
40 132-300-PS576 M EA 1.0000 02/09/18 0.000
SPRING ASS'Y
10 132-001-PS576-A P EA 1.0000 02/08/22 0.000
PS576 SCREW PING(D1.2 琴鋼線,鎳圖紙變
30 106-012-6033 P EA 1.0000 02/08/31 0.000
CHESS 圓柱㆒字頭 M6xL12.5ISO 鍍鎳
100 123-701-PS576 P EA 1.0000 02/10/05 0.000
PS576 BASE NECK(鑄鋁合金).
110 600-151-0400 P EA 1.0000 02/10/05 0.000
德國式電源線 150cm.黑色
120 610-151-15RM-1 P EA 1.0000 02/10/05 0.000
SH570/770 透明線 UL20276 外露 1.5M
㆒端 90 庋彎
LCD service manual. Page 20 of 20 唯冠科技研發部
Page 21
唯冠科技(深圳)有限公司
130 640-004-0007 P EA 1.0000 02/11/11 0.000
熱收縮管黑色Φ4*7mm
插件位置: FOR LED,
2 899-00M-PS576 M EA 1.0000 02/05/27 0.000
PS576 M/B FOR AU*5 PANEL
10 852-00M-PS576 M EA 1.0000 02/08/26 0.000
PS576 M/B FOR AU*5 PANEL SMD
10 200-100-AS576 P EA 1.0000 02/07/10 0.000
AS576 MAIN BOARD PCB
插件位置: PCB,
30 281-031-20014 P EA 1.0000 02/07/10 0.000
SMD R 2K 1% 0603.
插件位置: R55,
40 281-031-62014 P EA 1.0000 02/07/10 0.000
SMD R 6.2K 0603.
插件位置: R46,
50 281-035-0R04 P EA 9.0000 02/07/10 0.000
RES 0ohm 5% 1/10W 0603 SMD.
插件位置: L12,R21,S1,S2,R13,
60 281-035-1014 P EA 4.0000 02/07/10 0.000
RES 100 5% 1/10W 0603 SMD.
插件位置: R42,R44,R45,R82,
70 281-035-1024 P EA 9.0000 02/07/10 0.000
RES 1K 5% 1/10W 0603 SMD.
插件位置: R6,R7,R24,R29,R30,
R31,R33,R37,R73,
80 281-035-1034 P EA 10.0000 02/07/10 0.000
RES 10K 5% 1/10W 0603 SMD.
插件位置: R2,R8,R9,R15,R34,
R35,R36,R48,R61,R70,
90 281-035-1054 P EA 2.0000 02/07/10 0.000
RES 1M 5% 1/10W 0603 SMD.
插件位置: R53,R17,
100 281-035-1514 P EA 1.0000 02/08/08 0.000
RES 150ohm +-5% 1/10W 0603 SMD
插件位置: R12,
110 281-035-2034 P EA 8.0000 02/07/10 0.000
RES 20K 5% 1/10W 0603 SMD.
插件位置: R56,R59,R78,R80,R84,
R87,R88,R90,
120 281-035-2224 P EA 7.0000 02/07/10 0.000
RES 2.2K 5% 1/10W 0603 SMD.
插件位置: R22,R25,R40,R41,R52,
LCD service manual. Page 21 of 21 唯冠科技研發部
Page 22
唯冠科技(深圳)有限公司
R81,R83,
130 281-035-3304 P EA 6.0000 02/07/10 0.000
RES 33ohm 5% 1/10W 0603 SMD.
插件位置: R3,R5,R47,R50,R51,
L11,
140 281-035-3334 P EA 2.0000 02/07/10 0.000
RES 33K 5% 1/10W 0603 SMD.
插件位置: R85,R57,
150 281-035-4704 P EA 1.0000 02/07/10 0.000
RES 47ohm 5% 1/10W 0603 SMD.
插件位置: R72,
160 281-035-4724 P EA 8.0000 02/07/10 0.000
RES 4.7K 5% 1/10W 0603 SMD.
插件位置: R4,R11,R16,R19,R20,
R28,R32,R39,
170 281-035-4734 P EA 2.0000 02/07/10 0.000
RES 47K 5% 1/10W 0603 SMD.
插件位置: R66,R77,
180 281-035-5104 P EA 2.0000 02/07/10 0.000
SMD R 0603 51ohm 5%.
插件位置: R68,R71,
190 281-035-5114 P EA 1.0000 02/07/10 0.000
RES 510 5% 1/10W 0603 SMD.
插件位置: R10,
200 281-035-7504 P EA 4.0000 02/07/10 0.000
SMD R 75 ohm 0603.
插件位置: R74,R75,R76,R1,
210 282-330-2454 P EA 14.0000 02/07/10 0.000
RES-NET 33ohm 5% SMD 8P4R.
插件位置: RP1,RP4,RP5,RP6,RP7,
RP8,RP9,RP10,RP11,
RP12,RP13,RP14,RP15,
RP16,
220 282-472-2454 P EA 1.0000 02/07/10 0.000
RES-NET 4.7K 5% SMD 8P4R.
插件位置: RP3,
280 381-151-032554 P EA 1.0000 02/07/10 0.000
SMD CC 150PF 25V NPO 0603.
插件位置: C77,
290 381-220-032554 P EA 8.0000 02/07/10 0.000
SMD CC 22pF 25V NPO 0603.
插件位置: C17,C18,C56,C62,C70,
C97,C98,C127,
LCD service manual. Page 22 of 22 唯冠科技研發部
Page 23
唯冠科技(深圳)有限公司
300 381-301-032554 P EA 1.0000 02/07/10 0.000
SMD CC NPO 25V 300PF 5% 0603.
插件位置: C68,
310 381-330-032554 P EA 2.0000 02/07/10 0.000
NPO 33PF/25V +-5% 0603 SMD
插件位置: C100,C131,
330 382-103-032564 P EA 13.0000 02/07/10 0.000
SMD CC 0.01uF/25V X7R 0603.
插件位置: C47,C50,C60,C72,C74,
C82,C86,C88,C90,C93,
C107,C110,C112,
340 382-393-032564 P EA 1.0000 02/07/10 0.000
SMD CC 0.039uF/25V X7R 0603.
插件位置: C84,
350 382-472-035064 P EA 3.0000 02/07/10 0.000
X7R 4700pF/50V +-10% 0603 SMD
插件位置: C87,C91,C94,
360 382-682-035064 P EA 2.0000 02/07/10 0.000
X7R 6800P/50V +-10% 0603SMD.
插件位置: C135,C99,
370 385-104-032584 P EA 54.0000 02/07/10 0.000
Y5V 0.1u/25V +80%-20% 0603
插件位置: C1,C2,C3,C4,C5,C7,
C8,C9,C10,C14,C15,
C16,C20,C21,C23,C24,
C25,C26,C28,C29,C33,
C36,C41,C43,C44,C45,
C46,C49,C51,C52,C53,
C54,C55,C57,C58,C61,
C63,C65,C66,C69,C78,
C83,C85,C89,C92,C95,
C96,C111,C115,C116,
C117,C118,C125,C126,
380 385-105-031684 P EA 3.0000 02/07/10 0.000
Y5V 1uF/16V +80-20% 0603.
插件位置: C130,C132,C133,
420 481-LCC-0440 P EA 1.0000 02/07/10 0.000
SOCKET 44PIN PLCC.
插件位置: U2,
460 506-0AI-C1084 P EA 1.0000 02/07/10 0.000
SMD REG.AIC1084CM 3.3V 5A.
插件位置: U7,
470 506-0AI-CX33 P EA 1.0000 02/07/10 0.000
LCD service manual. Page 23 of 23 唯冠科技研發部
Page 24
唯冠科技(深圳)有限公司
AIC1720-33 CX3.3V 100mA SOT89.
插件位置: U12,
480 506-0AP-4835 P EA 1.0000 02/07/10 0.000
APA4835RI/ANPEC AUDIO AMP.
插件位置: U14,
490 506-2AI-C1578 P EA 1.0000 02/07/10 0.000
IC DC TO DC IC.AIC1578(SMD).
插件位置: U11,
500 506-524-LC21 P EA 1.0000 02/07/10 0.000
MEMORY IC 24LC21 SMD.
插件位置: U13,
510 506-5NM-24C16 P EA 1.0000 02/07/10 0.000
24C16 SO8 MEMORY IC SMD.
插件位置: U1,
520 506-774-LCX14 P EA 1.0000 02/07/10 0.000
74LCX SOIC14 HI SPEED TTL SMD.
插件位置: U10,
530 506-800-358D P EA 1.0000 02/07/10 0.000
插件位置: U5,
540 506-SMA-SCOT-V P EA 1.0000 02/07/10 0.000
SCALER CHIP MASCOT V MRT.
插件位置: U8,
550 518-02N-3904 P EA 5.0000 02/07/10 0.000
NPN 2N3904S(SMD).
插件位置: Q1,Q2,Q3,Q4,Q5,
560 518-1CE-9435 P EA 2.0000 02/07/10 0.000
MOSFET CE9435A S08.
插件位置: U4,U9,
580 528-2BA-T54C P EA 1.0000 02/07/10 0.000
SMD DIODE BAT54C SOT23.
插件位置: Q6,
610 558-352-5000 P EA 1.0000 02/07/10 0.000
SMD FUSE 1206 24V 5A.
插件位置: F1,
690 780-103-3000 P EA 2.0000 02/07/10 0.000
SMDBEAD SBK160808300Y0603 30
插件位置: L13,L14,
700 745-050-3072 P EA 1.0000 02/11/30 0.000
LINE COIL 5uH JBT0385 100805-4
720 630-030-9003 P EA 1.0000 02/08/27 0.000
30P 0.5mm OMRON XF2H-3015-1.
插件位置: CN6,
730 630-045-9003 P EA 1.0000 02/08/27 0.000
LCD service manual. Page 24 of 24 唯冠科技研發部
Page 25
唯冠科技(深圳)有限公司
45P 0.5mm OMRON XF2H-4515-1.
插件位置: CN3,
740 780-103-8000A P EA 3.0000 02/09/06 0.000
SMD BEAD FCM1608K-800T07 百微.
插件位置: L22,L23,L24,
750 780-103-3000A P EA 3.0000 02/09/06 0.000
BEAD FCM1608K-300T07
插件位置: L25,L26,L27,
760 780-107-1210H P EA 4.0000 02/10/29 0.000
MLB 321611-121 120 ohm 2000mA ECN-2A0143
插件位置: L1,L6,L8,L18,
20 851-00M-PS576 X EA 1.0000 02/08/26 0.000
PS576 M/B FOR AU*5 PANEL DIP
20 232-R02-505T P EA 1.0000 02/07/10 0.000
WR-C-5W 0.020ohm 5%臥式自插.
插件位置: R43,
230 330-100-16255 P EA 1.0000 02/07/10 0.000
5mm EC 10uF 16V 105C M TP MI.
插件位置: C104,
241 330-101-16255 P EA 7.0000 02/12/09 0.000
5mm EC 100uF 16V 105C M TP MI. ECN-2C0011
插件位置: C101,C124,C37,C39,
C42,C64,C75,
250 330-220-16255 P EA 1.0000 02/07/10 0.000
MINI CE 22uF/16V +-20% TP105℃
插件位置: C22,
260 330-221-16255 P EA 6.0000 02/07/10 0.000
EC H:5mm 220uF16V +-20% 105C.
插件位置: C38,C40,C48,C59,
C119,C67,
270 330-2R2-50255 P EA 1.0000 02/07/10 0.000
E.CAP 2.2UF/50V(4*5).
插件位置: C123,
390 409-003-0110 P EA 1.0000 02/07/10 0.000
DC-JACK (SCD510CCS000B00/旭全)
插件位置: CN12,
400 409-003-0111 P EA 1.0000 02/07/10 0.000
紅 SCP606UNT2T0000 PIN JACK 旭全
插件位置: CN11,
410 409-003-0112 P EA 1.0000 02/07/10 0.000
白 SCP606UNT3T0000 PIN JACK 旭全
插件位置: CN10,
440 504-000-6300L P EA 1.0000 02/07/10 0.000
LCD service manual. Page 25 of 25 唯冠科技研發部
Page 26
唯冠科技(深圳)有限公司
RESET IC V6300L TD92.
插件位置: TU2,
取替代料:(504-000-MCP101 )RESET IC MCP101-450HI/TO TO92. 取替代量: 1.00000
生效日期:02/08/03
450 504-007-A431 P EA 1.0000 02/07/10 0.000
KIA431/KEC
插件位置: TU3,
570 522-030-B340-T P EA 1.0000 02/07/10 0.000
SCHTTKY SB340 TP/金永裕.
插件位置: D4,
590 531-110-49US P EA 1.0000 02/07/10 0.000
11.0592MHZ HC 49US CRYSTAL.
插件位置: X1,
600 531-120-49US P EA 1.0000 02/07/10 0.000
12MHZ HC 49US CRYSTAL 30PPM.
插件位置: X2,
620 630-002-1008 P EA 2.0000 02/07/10 0.000
JWT A2001 PITCH 2.00mm 臥式 2P.
插件位置: CN7,CN8,
630 630-006-1008 P EA 1.0000 02/07/10 0.000
JWT A2001 PITCH 2.00mm 臥式 6P.
插件位置: CN5,
640 630-008-C001 P EA 1.0000 02/07/10 0.000
JST 1.5mm HEADER ZR 臥式 S8B-ZR.
插件位置: CN2,
680 745-470-20621 P EA 1.0000 02/07/10 0.000
CHOKE 47UH@3A(承翰).
插件位置: L7,
690 152-000-SH570 P EA 1.0000 02/09/16 0.000
TOSHIBA DC JACK SUPPORT NYLON.
730 83X-000-LCDM X EA 1.0000 02/10/10 0.000
LCD MONITOR PCB 段輔料. ECN-2A0041
10 830-002-0710A P KG 0.0040 02/10/10 0.000
焊錫條 63/37 厚昇.
20 834-011-0009 P KG 0.0018 02/10/10 0.000
助焊劑 8010 型 16kg/桶
30 830-001-0800 P KG 0.0003 02/10/10 0.000
焊錫絲 0.8mm 厚昇 1KG/卷
40 833-014-0003 P KG 0.0001 02/10/10 0.000
熱融膠 LB-1101 瞬利 UL-94V0.
50 832-005-0002 P KG 0.0020 02/10/30 0.000
稀釋劑(ECSB).
740 330-331-06255 P EA 1.0000 02/10/14 0.000
LCD service manual. Page 26 of 26 唯冠科技研發部
Page 27
唯冠科技(深圳)有限公司
EC 330UF/6.3V +-20% 105°C
Φ8*5
插件位置: C79,
750 003-H03-LCD P EA 1.1000 02/10/25 0.000
LCD 系列 LBL 13.5*8MM 白紙底膠 ECN-2A0115
760 485-415-S070 P EA 1.0000 02/11/30 0.000
D-SUB 3R15 FEMALE 180D 6.8MM
插件位置: CN9,
3 849-20S-5703 P EA 1.0000 02/05/27 0.000
INVETER 576 AU 2L 連達加線
4 899-400-PS576 M EA 1.0000 02/05/27 0.000
PS576 CONTRONL/B
10 200-701-PS576 P EA 1.0000 02/07/10 0.000
PS576 CONTROL KEY PCB
401-170-0220 P EA 5.0000 02/07/10 0.000
TACT SWITCH H5mm
插件位置: S1,S2,S3,S4,S5,
30 520-005-0302-F P EA 1.0000 02/07/10 0.000
LED LT0302-23(華興)彎 90 度.
插件位置: D1,
40 630-008-C001 P EA 1.0000 02/07/10 0.000
JST 1.5mm HEADER ZR 臥式 S8B-ZR.
插件位置: J1,
5 705-350-901A P EA 1.0000 02/05/27 0.000
AU 15"LCD SLINL PANEL.
LCD service manual. Page 27 of 27 唯冠科技研發部
Page 28
唯冠科技(深圳)有限公司
LCD service manual. Page 28 of 28 唯冠科技研發部
Page 29
唯冠科技(深圳)有限公司
LCD service manual. Page 29 of 29 唯冠科技研發部
Page 30
唯冠科技(深圳)有限公司
LCD service manual. Page 30 of 30 唯冠科技研發部
Page 31
Page 32
I. BLOCK DIAGRAM
VSYNC
HSYNC
唯冠科技(深圳)有限公司
LVDS
VGA-IN
12PIN
C
O
N
N
E
N
T
D.D.C
24C21
EEPROM
24C16
EEPROM
3 {R.G.B}
DDC-SDA
DDC-SCL
ADC
8 R0~R7
8 G0~G7
8 B0~B7
CRYSTAL
12M HZ
SCALER
8 RA0~RA7
8 GA0~GA7
8 BA0~BA7
8 RB0~RB7
8 GB0~GB7
8 BB0~BB7
LVDS
10 EVEN
D-DE
10 ODD
MCU
POWER
SWITCH POWER
SUPPLY AND
REGULATOR
12V
POWER
ADAPTER
12V
3V
5V
SCL
CRYSTAL
12M HZ
8PIN
C
O
N
N
E
N
T
BLK-ON/OFFSDA
BRIGHTNESS
12V
FUNCTION KEY
LCD service manual. Page 32 of 32 唯冠科技研發部
LCD PANEL(LVDS)
INVERTER
Title
BLOCK DIAGRAM
Size Document NumberRev
B
ORION
Date:Sheet
HI VOLTAGE
B
of
11Tuesday, October 23, 2001
Page 33
J. SCHEMATIC DIAGRAM
唯冠科技(深圳)有限公司
LCD service manual. Page 33 of 33 唯冠科技研發部
Page 34
CN9
1
2
17
3
4
16
5
6
7
8
9
10
11
12
13
14
15
DB15
DB15 JP2
-------------------- 4 1 GND
5 2 TEST
9 3 5V
13 4 HS
14 5 VS
15 6 SCL
12 7 SDA
6 8 RGND
1 9 R
7 10 GGND
2 11 G
8 12 BGND
3 13 B