Proton 1.0 User Manual

The Smart Watch PROTON 1.0

(Wear the Proton 1.0 with switch 1, 2, 3 on the right side, speaker pointing towards your body and the
SIM card slot on the left)
Proton 1.0

User manual.

1.

1 = on / off

2 = volume +

3 = volume –

4 = base function list

5 = SIM card slot

6 = speaker

7 = USD connector

2. Switch ON/OFF

To switch your Smart Watch on push button 1 for a few seconds.
The Proton logo comes up after this the android logo and then the Clock face.
By sliding your finger or touch pen over the screen from right to left you enter the user interface (UI).
If you like to switch Proton 1.0 off keep the button number 1 pressed down for a few seconds and the
unit switches off.

3. Charging

If you like to charge your Proton 1.0 or connect it to your computer, please lift carefully with a bit of
pressure the USB connector cover 7 upwards.

You can charge your Proton 1.0 by connecting the build into wristband USB port directly into the charger
or computer or use the extinction cable. If you like to charge your Proton 1.0 do not switch on the data
transfer function on the UI. The proton 1.0 will stop charging when full automatically.

4. Insert SIM card

Open the SIM card slot by inserting the pin into the hole on the left side of the SIM card tray and push
slightly down. The tray will open. Insert the SIM card and push the tray back into the slot.

5. General operations

The most important button is number 1 as shown in the picture on top of this manual. With button 1
you switch Proton on or wake it up. The screen comes alive, with your finger or the touch pen you can
move the UI icons from right to left and wise versa. If you touch the icons a new screen opens and
depending in the functions and what you are doing, more screen will open. To get back to the privies
screen push button 1 very short. If you like to get back to main UI screen click button 1 for closing every
screen.

List of functions:

1. Phone

2. Massaging

3. People

4. Sound recorder

5. Settings

6. Music player

7. Bluetooth prox.

8. Browser

9. Calculator

10. Calendar

11. Camera

12. Clock

13. Downloads email

14. File manager

15. Gallery

16. Search

17. Wireless input

18. Video player

The User Interface and its Icons

Screen 1

Screen 2 Screen 3
1 2 3 4

A few tips to set up your Proton 1.0 to easy use.

After the watch is fully powered up you will see a clock screen
If you like to go to the setup options to set time, date, background picture and so
just click on the watch button # 4 you will see this screen:

Here you find quick access to the 3 major function.
Move this clock with your finger to the left and you will see screen 2. Now you
have several options. #2 direct buttons to applications like music, phone and so.
Touch #1 and you get to all App #3 shows the category #4 for example MX Player.
I always use this player to watch Movies.
If you like to get out of this screen push button 1 on your watch.

The function “Developer options” is password protected and all setting are pre­set, if for any reasons you like to access this function contact us by email:

[e-mail].

When you now plug your Proton 1.0 into a USB port for data transfer you will
automatically see this screen, touch on “Turn on USB storage”. After the watch is
connected the screen turns into orange with the text “USD storage in use” and

“Turn off USB storage” touch “Turn of USB storage” and you can disconnect

Proton from the USB port.
If you like to check files or view pictures or movies or install an APP to test and do
not like to disconnect proton 1.0 just now there is a way to switch between the
USB storage and watch mode. Follow this INSTRUCTION:
So you have touched Turn of USB storage. And you can now use all functions on
you smart watch, and now you like to turn the USB storage back on.

With your finger or touch pen pull the top of the screen down and you will see
this options. Touch “USB connected” and this window comes up so touch “Turn
on USB storage” and you are back connected to your computer.

Many functions have an operating screen which you can pull down from the top.
There are about 300 different settings and combination of functions and also
depending on the App’s installed the screen has different sub screen which can be
brought up.

The button marked with M can bring up several submanues depending which app
is running.
The button marked with the power sign is for switch on / off and going back on
called screens.

Touch and hold here or here or here or here and depending on what
is running submenus will come up.
Push the Power bottom and they will close.