Page 1
ReachMaster Pro
A
mphenol
Advanced Sensors
PROTIMETER
Non-Invasive Moisture Meter
The ReachMaster Pro is a non-invasive moisture meter enabling the rapid assessment of
moisture conditions in buildings.
No more climbing ladders or working on your hands and knees!
Typical initial moisture surveys can increase inspection time by up to 60%, but the
ReachMaster Pro makes for quick, safe, and easy measurements of oors, hard to reach
walls, and ceilings, along with unrivaled depth of measurement and sensitivity adjustment.
Features
• Non-invasive moisture measurement
• Wireless communication between sensor head and
display
• Telescopic handle adjusts from 27” to 48”
(69cm to 114cm)
• Depth of Measurement: Up to 5” (12cm) - Varies with
material under test
• Color Display: Tilt-adjustable with red, yellow and
green zones
• Measurement Range: 60-999 ppm
• Audible alarm
• Auto shut-off
• Adjustable sensitivity to focus in on moisture source
• Replaceable sensor wear plate with wear indicator on
abrasion plate (1 spare included)
• Simple eld recalibration
• Battery Life: 80 hours on continuous operation
• Battery Requirements: 4x AA in display unit, 2x AA
batteries in sensor head
• Firmware upgradeable by user as new features
become available
• Multi-language menu
Benefits
• Easy and quick moisture detection on oors, walls and
ceilings
• Eliminates working on hands and knees, as well as
climbing ladders
• Not adversely affected by surface moisture
• Signicantly quicker moisture assessment than
handheld meters
Applications
• Flood damage restoration
• Flooring inspection
• Home inspection
• EIFS inspection
• Rubber roof leak detection
• Fiberglass marine hull inspection
Page 2
ReachMaster Pro Specifications
Amphenol
Advanced Sensors
Operating Conditions
• Temperature: 32°F to 122°F (0°C to 50°C)
Measurement Specifications
• Non-invasive, instantaneous readings
• Maximum Depth: 5” (12cm) - Varies with material under test
• Range: 60 ppm to 999 ppm
• Surface moisture is not adversely affected.
Power Requirements
• Sensor Head: 2x AA Alkaline Batteries ~ 2700mAH
- Battery level indication on display unit
- Battery low LED indication on sensor unit
• Display Module: 4x AA Alkaline Batteries ~ 2700mAH
- Battery level indication on display
Gross Weight
24.7 oz (700 g) - Instrument only
Regulatory Compliance
• CE
• RoHS
• ETL
User Interface - Display Graphical LCD
• Size: 2” (50mm, 5cm)
• Resolution: 176 X 220
• Backlight (with adjustable brightness)
• User application proles
• Sticky memory, last used application settings
www.protimeter.com
www.amphenol-sensors.com
© 2020 Amphenol Corporation. All Rights Reserved. Specications are subject to change without notice.
Other company names and product names used in this document are the registered trademarks or
trademarks of their respective owners.
AAS-920-767D - 04/2020
Loading...