Pro's Pro TX 500S, TX 500N Instructions & User's Manual

TX 500 N & S

ELECTRONIC STRINGING MACHINE

INSTRUCTIONS

&

USER MANUAL

Unpacking and inspection

The machine is delivered ready assembled.
In the parcel are 4 pieces V-shaped Side Supports, two Ultimate clamps, one AC
power cord and Allen wrenches.

Lift carefully the machine out of the carton. Inspect the Electronic TX-500N
stringing machine for obvious damage. Check if all parts are in the carton.
If any item is missing or damaged, contact your delivery agent and your sales
representative. Retain the packaging materials and shipping container in the
event that reshipping is required.

Operating Instructions

1. Place the machine on a table or a stand foot.

2. On the electronic part is on the back side a switch which should be in the ON position

for normal operation.

3. Turn the power on and a red light flashes and the tension number appears on the LED

display.

4. Select the scale of the Tension for kilograms or pounds, left beside the display. The

machine is always shipped with kilogram selected.

5. Now turn the knob on the right side of the Electronic part to select the tension you want

to string your racket. The machine is very sensible, so it will by maybe not so easy to
select.

6. The stringing machine has 3 positions:

0 ………. Machine Stops
1 ………. Machine tears to the selected tension

2 …..........Machine moves back to the starting position.

7. If the string is not release then press the green button, the machine will rotate one total

round.

8. After stringing turn the machine off.

9. Turn the tension on the display down to 10 kilogram that the tension in the machine is as

little as possible in the time of not stringing.