Pro's Pro challenger I Installation And Operation Manual

PRO’S PRO

®

CHALLENGER I

Seite 1 von 5

CHALLENGER

STRINGING MACHINE

MANUAL

Installation & Operation

Table of Contents

1 TABLE OF CONTENTS...........................................................2

2 DESCRIPTION OF PARTS......................................................3

3 ASSEMBLY INSTRUCTION................................................4

4 STRING ING THE FRAME...............................................6

5 CLAMP BASE ADJUSTMENT................................................8

6 PREPARATION OF STRINGING...........................................9

PRO’S PRO

®

CHALLENGER I

Seite 2 von 5

PRO’ S PRO

®

—CHALLENGER

•Description of Parts

1. Assembly Instruction

Step 1: After opening the box, remove the installation and operation manual.

The angled support (8), The string clamp (9), Four L-Shaped wrenches, Long
nose pliers(17) and diagonal cutting pliers. Remove the foam box, Remove the
machine from the foam box .

Step 3: Rotate the mounting table and lift the tension bar.

1) Machine Base

2) Liner String Gripper

3) Tension Bar Drum

4) Ratchet System with clutch

5) Latch

6) Drop Weight Knob

7) Drop Weight

8) Tension Bar

9) Tension Bar End Cap

10) Side support arm

11) Angled Support

12) String Clamp

13) Frame Support

14) Mounting Table

15) Swivel Base

16) 3.0 m/m l-shaped wrench

17) 4.0 m/m l-shaped wrench

18) 5.0 m/m l-shaped wrench

19) 6.0 m/m l-shaped wrench

20) Long Nose Pliers

21) Diagonal Cutting Pliers

9

7

6

8 3

4

5

2

1

15

14

13

12

11

10

16

17
18

19

20 21