Prospec Electronics INFPRV350 Owner's Manual

Page 1

*This stereo should not be washed with a pressure washer neither should it be washed with chemicals. A wet sponge or damp cloth will suffice.*

This product is serviced exclusively by Prospec Electronics Inc. and must be returned to Prospec for in and out of warranty repairs. It can not be serviced under warranty by other Infinity service centers.

For service contact us : 3325 South Morgans Point Road Mt Pleasant SC 29466

Tel 843-849-9037

Or visit: www.prospecelectronics.com

INFPRV350 Owner’s Manual

3325 South Morgans Point Rd. | Mt. Pleasant, SC 29466

. .

P: 843 849 9037 | www.prospecelectronics.com

Page 2

Troubleshooting

Advisory Name

The radio has detected a fault with the SiriusXM antenna. The antenna cable may be either disconnected or damaged. Verify that the antenna cable is connected to the SiriusXM Connect Vehicle Tuner. Inspect the antenna cable for damage and kinks. Replace the antenna if the cable is damaged. SiriusXM products are available at your local car audio retailer or online at www.shop.siriusxm.com.

The following information helps you self-diagnose common issues without the need for contacting SiriusXM support.

Recommended Description

Check Antenna

The radio is having difficulty communicating with the SiriusXM Connect Vehicle Tuner. The tuner may be disconnected or damaged. Verify that the SiriusXM Connect Vehicle Tuner cable is securely connected to the radio.

Check Tuner

No Signal

The SiriusXM Connect Vehicle Tuner is having difficulty receiving the SiriusXM satellite signal. Verify that your vehicle is outdoors with a clear view of the sky. Verify that the SiriusXM magnetic mount antenna is mounted on a metal surface on the outside of the vehicle. Move the SiriusXM antenna away from any obstructions. Inspect the antenna cable for damage and kinks. Consult the SiriusXM Connect Vehicle tuner installation manual for more information on antenna installation. Replace the antenna if the cable is damaged. SiriusXM products are available at your local car audio retailer or online at www.shop.siriusxm.com.

Subscription Updated

The radio has detected a change in your SiriusXM subscription status. Press ENTER button to clear the message. Visit www.siriusxm.com or call 866-635-2349 in the USA or 877438-9677 in Canada if you have questions about your subscription.

Channel Not Available

The channel that you have requested is not a valid SiriusXM channel or the channel that you were listening to is no longer available. You may also see this message briefly when first connecting a new SiriusXM Connect Vehicle tuner. Visit www.siriusxm.com for more information about the SiriusXM channel line up.

Channel Not Subscribed

The channel that you have requested is not included in your SiriusXM subscription package or the channel that you were listening to is no longer included in your SiriusXM subscription package. In the U.S.A., visit www.siriusxm.com or call 1-866-635-2349 if you have questions about your subscription package or would like to subscribe to this channel. In Canada, visit www.siriusxm.ca or call 1-877-438-9677.

Channel Locked

The channel that you have requested is Locked by the radio Parental Control feature. See the description on Parental Control, page 14 for more information on the Parental Control feature and how to access locked channels.

Installation Instructions

Instructions:

1. Install jamb nuts (4) loosely on mounting studs (3), so they will not touch mounting brackets (5) when installed.

2. Slip mounting bracket (5) on and make flush with mounting surface (2). DO NOT RIGHTEN

3. Snug spring washer (6) and outer nuts (7) against mounting plate (2). DO NOT TIGHTEN

4. Position jamb nuts approximately 1/16” from mounting bracket.

5. Tighten outer nuts completely.

6 7

Page 3

Table of Contents

Table of Contents ----------------------------------------------------------------- 1

Product Description -------------------------------------------------------------- 2

Installation ------------------------------------------------------------------------- 3

Wiring Configuration ------------------------------------------------------------ 3

General Function of Buttons ---------------------------------------------------- 4

Volume Adjustment / MUTE --------------------------------------------------- 5

General Settings ------------------------------------------------------------------ 6

Radio Section Operation -------------------------------------------------------- 9

SiriusXM R Section Operation ------------------------------------------------ 11

Bluetooth Section Operation --------------------------------------------------- 15

USB Section Operation --------------------------------------------------------- 17

AUX Section Operation -------------------------------------------------------- 19

Troubleshooting ----------------------------------------------------------------- 20

Troubleshooting

*Note: In many respects, a stereo acts much like a computer and occasionally requires a reboot. In the unlikely event of product malfunction, a reset can usually fix the issue. For software reset operation, please refer to page 8.

Issue

No power

No Sound

No Reception

USB stick not reading

Cause

1. Incorrect wiring

2. Fuse is blown

3. Low battery voltage

1. Speaker connection came loose

2. Bad speaker

3. Output blown

4. Volume too low on media device

1. Antenna not firmly seated in socket

1. File must be a mp3 or wma file

Solution

1. Double check wiring

2. Replace fuse

3. Check voltage of vehicle battery with multimeter. Voltage must be at least 11V.

1. Double check connections.

2. Replace bad speaker with known good speaker and connect.

3. Send unit in for repair.

4. Increase volume of media device

1. Insert firmly

1. Convert format to mp3 or mwa.

While in Bluetooth mode:

No Connection

1. You are not connect to the “PRV” address on your portable media device.

2. Out of range

3. The connection is already in use.

1. Choose “PRV”

2. Bring portable media device closer to the receiver. Device needs to be within 30’.

3. Ask the person who first paired to drop out.

Page 4

对折基准线

Product Description

This Infinity PRV350 incorporates a 3.5” TFT color screen, ready to complement your day whether you are on the water, motorcycle, UTV trail, or farm. Following the same footprint as the popular INFPRV250, this stereo is synonymous with excellence. In fact, the INFPRV350 was listed as one of the top new products of 2015 by Boating Industry magazine. Check in with us often to see what the next Prospec experience will bring!

The INFPRV350 incorporates the following features:

AUX Section Operation

1. To Select USB mode At Home Menu, press TUNE Up or Down to move the highlight to AUX source, then

press ENTER button to go into the AUX mode. Note: highlight movement indicated by the icon background change.

The use of auxiliary mode allows you to play the portable music device through the headphone jack. Note: An additional accessory/adaptor must be purchased in order for this to happen. Prospec's part, SEAMINI2 or SEAUSBMINI36 fulfills this option.

AM/FM

Bluetooth Audio Streaming with ID tagging

USB input and control-for USB drives only

Auxiliary input

3.5” color TFT screen / Waterproof faceplate

50W x 4 amplifier

Wired remote option

U.S. and European tuning

Charging through USB

3 pair of RCA output including subwoofer output

SiriusXM-Ready (SiriusXM connect tuner and subscription required)

The Infinity brand is part of Harman International Industries. In 1958, Harman Kardon developed the world’s first stereo receiver and we are proud to bring you the world’s first Infinity marine color screen receiver!

Page 5

注：切边后的成品尺寸一定为 1 45 x2 10m m

对折基准线

Installation

A mounting gasket has been added inside the package for convenience. Trace along the outside edge of the gasket thus revealing your cutout.

Mounting Illustration

1. Avoid installing stereo below cupholders! Make sure mounting substrate is flat to avoid flexing of the plastic.

2. Use the back bracket and studs to affix the unit. Install the U bracket behind the unit, using two nuts per bolt for ultra hold.

Wire Configuration

NOTE: When wiring, the red lead is recommended to be wired to ACC/ignition power lead.

12P CONNECTOR

(REM)

( ACC )

( GROUND )

FUSE

BLUE

RED

BLACK

GRAY

GRAY/BLACK

VIOLET

VIOLET/ BLACK

(FRONT RI GHT )

( REAR RIGH T )

GREEN

GREEN/B LACK

WHITE

WHITE/B LACK

( FRONT LEFT )

( REAR LEFT )

10A

(USB)

RED

WHITE

(AUX)

(ANT JA CK)

RED

WHITE

(REAR L INE OUT )

(Siri usXM Tu ner- opt ional )

RED

WHITE

(SUBW OOFER )

6P REMOTE

CONTROL

RED

WHITE

(FRON T LINE OU T)

3. To avoid possible water ingress into wire harness area, route the harness in the downward direction as shown above.

4. Track Up/Down

While USB playing, simply press TUNE Up or Down button to select the next or previous track. To fast forward or rewind, press and hold TUNE button.

5. Scan Play

While USB playing, simply press MENU button to activate navigation, it will highlight at SCAN, now repeat press MENU button to toggle select Track Scan, Directory Scan, or SCAN OFF. (Note: The play mode icon would change simultaneously.)

6. Repeat play

While USB playing, simply press MENU button to activate navigation, then press TUNE Down button to move highlight to RPT, repeat press MENU button to toggle select Track Repeat, Directory Repeat, or RPT OFF. (Note: The play mode icon would change simultaneously.)

7. Random play

While USB playing, simply press MENU button to activate navigation, then press TUNE Down button to move highlight to RDM, repeat press MENU button to toggle select Track Random, Directory Random, or RDM OFF. (Note: The play mode icon would change simultaneously.)

8. F.LIST (Folder / File Search)

While USB playing, simply press MENU button to activate navigation, then press TUNE Down button to move highlight to F.LIST, press ENTER button to go inside the F.List. In F.List, press TUNE Up or Down button to choose desired Folder, press ENTER to display sub-directory or files inside, press TUNE Up or Down button to choose desired file and press ENTER button to play it.

Refers toplay current track repeatedly.

Refers to play the tracks in current Directory repeatedly.

Refers to play all the tracks in normal sequence.

Refers to play all the tracks in a random sequence.

Refers to play the tracks in current Directory in a random sequence.

Refers to play all the tracks in normal sequence.

USB Section Operation

Refers to play the first 10s of all the tracks in the USB device.

Refers to play the first 10s of all the tracks in current Directory.

Refers to play all the tracks in normal sequence.

Page 6

注：切边后的成品尺寸一定为 1 45 x2 10m m

对折基准线

General Function of Buttons

MENU ENTER

1. POWER, MUTE, PAUSE button

- With unit off, press to power the unit on.

- With the unit on, press and hold for over 2s to power the unit off.

- In Radio, SiriusXM, AUX mode, press to MUTE sound output, press again to resume sound output.

- In USB, BT Music mode, press to PAUSE playback, press again to resume playback.

2. MENU, ENTER button

- In any status, press and hold for 2s to navigate to home display.

- In source playing status, quick press to activate the bottom navigation function. (Note: Bottom navigation function is disabled after 5s without operation.)

- In any selection status, press ENTER to confirm selection.

3. VOLUME Up button

- Simply press it to increase volume level.

4. VOLUME Down button

- Simply press it to decrease volume level.

5. Tune Up button

- In playing status, press to select the next station, channel, or track.

- In bottom navigation mode, press to move highlight upward/over.

6. Tune Down button

- In playing status, press to select the previous station, channel, or track.

- In bottom navigation mode, press to move highlight downward/over.

USB Section Operation

1. To Select USB mode

At Home Menu, press TUNE button to move the highlight to USB source, then press ENTER button to go into the USB mode. Note: This input is dsigned to read and play USB drives (mp3 and wam files), not media/ phones. You can charge most phones through the USB input. Music, however, needs to be played back by using eigher BT or Aux input.

2. USB Screen Description

3. Play/Pause Play

While USB is playing, press the PAUSE button to pause the playback, and press again to resume playback.

Only displays when EQ / LOUD ON was selected in the Settings.

ID3 tag: Song name Artist Album

Play/Pause

SCAN: Intro Scan play (Track / Directory Scan play) RPT: Repeat play (Track / Directory Repeat play)

F.List: To display the Directory / File List

RDM: Random play (Track / Directory Random play)

Track No.

Track elapse time

Play mode

Note: refers to PLAY; refers to PAUSE.

Page 7

对折基准线

2. Home Menu (Source display)

At Home Menu, press the TUNE Up/Down button to move to desired source and press ENTER button to confirm.

Radio

SiriusXM

BT Music

USB

AUX IN

Settings

1. Sign Up Display

Once the unit powered on, the introductory home screen appears for 4 seconds, then switches to the last played mode before power off occurred.

Push

Note: icon background changes to two toned burnt orange when selected. For example, Radio mode is the selected mode in above picture.

4. Play/Pause Play

Once the BT device being paired is successful, music will begin to play. Note: For some Bluetooth enabled phones, you might activate play from your phone first. It depends on the phone itself. While BT Music playing,

Note: With the Bluetooth connection disconnected, once you power on the unit next time, it will establish the Bluetooth connection automatically.

press the PAUSE button to pause the playback, and press it

again to resume playback.

5. Track Up/Down

While BT Music is playing, press TUNE Up or Down button to select the next or previous track.

6. Disconnect

In BT Music playing mode, in order to disconnect the BT device, press MENU button to activate bottom navigation, it will highlight at DISCONN, press ENTER button to disconnect the BT connection. Note: When your BT device battery is at low charge, the Bluetooth connection may occasionally be lost. To maintain good connectivity ensure that your BT device battery is adequately charged.

7. Connect

With BT device paired OK, but disconnected, if you want to reestablish the BT connection, press MENU button to activate bottom navigation, it will highlight at CONNE. Press ENTER button to connect the BT device.

Note: refers to PLAY; refers to PAUSE.

Bluetooth Section Operation

Page 8

General Operations

1. VOLUME Control

2. MUTE Control

In Radio, SiriusXM, or AUX mode, press MUTE button to mute sound output; press again to resume sound output.

In any mode, press VOL UP/DN button to adjust volume level. Press and hold VOL button to adjust volume level rapidly.

3. General Settings

Press and hold MENU button to go back to Home Menu, then press TUNE UP/DN button to move highlight to Settings source. Then press ENTER button to go into the Settings mode.

3-1. Bass Control

In Settings screen, press TUNE Up or Down button to select Bass, then press VOL Up or Down button to adjust Bass level.

3-2. Treble Control

In Settings screen, press TUNE Up or Down button to select Treble, then press VOL Up or Down button to adjust Treble level.

Bluetooth Section Operation

1. To Select Bluetooth mode

At Home Menu, press TUNE button to move the highlight to Bluetooth source, then simply press ENTER button to go into the Bluetooth mode. Note: highlight movement indicated by the icon background change.

2. Bluetooth Screen Description

3. Pair BT Device

If there is no BT device paired, go to settings on the BT device and turn the Bluetooth option ON. Pick “PRV” option on your Bluetooth enabled device. (if you are prompted for a password, the code entered will be “1234”.) If there was previously a BT device paired, simply press MENU button to highlight CONN and press ENTER to establish the BT connection.

Only displays when EQ / LOUD ON was selected in the Settings.

ID3 tag: Song name Artist Album

Play/Pause

CONN: To establish Bluetooth connection. DISCON: To disconnect the BT Device.

BT icon

If already has BT device connected, here display DISCON. If no BT device connect, here display CONN.

Paired device name.

Page 9

any Channel, first go back to Home Menu and select Settings. Press TUNE button to choose Parental Lock.

- Parental Lock On / Off Press VOL UP/DN button to move highlight to Off, then press ENTER, it will prompt for passcode, input four digits with VOL button and after each input press ENTER button to jump to next input. After four digit input, it will indicate “Lock is ON”. With Parental Lock On selected, all the locked channels are temporarily unlocked which will let you listen to the locked channels without inputting the passcode again. Note: Once you leave SiriusXM mode or power off the unit, it will revert to Parental Lock Off.

- To Unlock all channels Press VOL UP/DN button to move highlight to ALL, then press ENTER, it will prompt for passcode, input four digits with VOL button and after each input press ENTER button to jump to next input. After four digit input, press ENTER button to unlock all channels.

- To Lock/Unlock channels one by one

Press VOL UP/DN button to move highlight to CH, then press ENTER, it will prompt for passcode, input four digit passcode, press ENTER button. It will display the Channel list, press TUNE UP/DN button and press MENU at the desired channel. Note: if the selected channel was locked, then pressing MENU button will unlock it; and if the selected channel was unlocked, pressing MENU button will lock it.

If you want to change your code, first go back to Home Menu and select Settings. Press TUNE UP button to choose Parental Lock. Press VOL button to choose CODE CHANGE. It will prompt for current

11. Channel Parental Lock

The Parental Control feature allows you to limit access to any SiriusXM channels, including those with mature content. When enabled, the Parental Control feature requires you to enter a passcode to tune to the locked channels. To Lock / Unlock

12. SiriusXM Parental Lock Code Change

passcode, then new code, and one more prompt for new code confirmation. Use VOL button for code input, and press ENTER button after each input. If a wrong digit is inputted, press TUNE DN button to move to previous digit input. Note: Factory default passcode was 0000.

SiriusXM Section Operation

3-3. Balance Control

In Settings screen, press TUNE Up or Down button to select Balance, then press VOL Up or Down button to adjust Balance level.

3-4. Fader Control

In Settings screen, press TUNE Up or Down button to select Fader, then press VOL Up or Down button to adjust Fader level.

3-5. Loud Control

In Settings screen, press TUNE Up or Down button to select Loud, then press VOL Up or Down button to select ON or OFF.

3-6. EQ Selection

In Settings screen, press TUNE Up or Down button to select EQ, then press VOL Up or Down button to select Off, Classics, Jazz, Pop or Rock.

3-7. Subwoofer Gain Control

At Setting screen, press TUNE Up or Down button to select Subwoffer, then press VOL Up or Down button o adjust Subwoofer Gain level.

3-8. I-Volume Control At Setting screen, press TUNE Up or Down button to

select I-Volume, then press VOL Up or Down button to adjust the Initial Volume Level. This feature controls the maximum volume level desired when powered on.

General Settings

Page 10

3-9. Brightness Adjustment

In Settings screen, press TUNE Up or Down button to select Brightness, then press VOL Up or Down button to adjust Brightness level.

3-10. Area Selection

In Settings screen, press TUNE Up or Down button to select Area, then press VOL Up or Down button to select USA or EUR.

3-11. SiriusXM Parental Lock - Change Code In Settings screen, press TUNE Up or Down button to

select Parental Lock. Then press VOL Up or Down button to select Parental Lock sub-features. Please refer to SiriusXM Section Operation for details.

3-12. SXM Reset

At Setting screen, press TUNE Up or Down button to select SXM Reset, then ENTER button to reset the SXM Tuner.

3-13. Software Version View, Software Reset

At Setting screen, press TUNE Up or Down button to select S/W Version, then press MENU button to active highlight at VIEW and press ENTER button to view the Software Version.

Software Reset: In Software Version display status, press TUNE UP, TUNE DN, and TUNE UP in sequence, then press and hold TUNE DN for 7s to reset the unit. Note: It will be necessary to re-enter the radio preset

memories and other personal settings as these will have been erased when the software was reset. After resetting the unit, ensure all functions are operating correctly.

General Settings

SiriusXM Section Operation

8. Direct Channel Input

In SiriusXM mode, first press MENU button to activate navigation, then press TUNE Down button to move highlight at DIRECT, and press ENTER button. It will display the keyboard. Press VOL Up or Down button to select the desired digit, then press ENTER after each selection to move to next input. After three digit input, simply press ENTER button again to jump to the selected Channel. Note: If a wrong digit is inputted, simply press TUNE DN button to move to previous digit input. Repeat above operation until the correct channel is inputted.

9. Category List

In SiriusXM mode, first press MENU button to activate navigation, then press TUNE Down button to move highlight to Cat.LIST and to display the Category List. Press TUNE Up or Down button to select and press ENTER button at your desired Category. Then press TUNE Up or Down and ENTER button to select a desired channel.

10. Preset List Channel Tuning

In SiriusXM play mode, press MENU button to activate navigation, press TUNE UP/DN button to move highlight to P.List, then press ENTER button to display the Global Preset List.

Simply press TUNE Up or Down button to select a desired preset and press ENTER button to listen to it. It will let you listen to the selected channel for 10s before it reverts back to source playing screen. During this time, you can select another channel with TUNE UP/DN button.

Page 11

对折基准线

SiriusXM Section Operation

3. SiriusXM Screen Description

4. To Display Radio ID

Tune to Channel 0 or direct Tune to Channel 0 to display the Radio ID.

6. To Select the Previous / Next Channel

In SiriusXM mode, press TUNE Up or Down button to select the previous or next channel. Press and hold TUNE Up or Down button to rapid tune/browse channels, and release the button when the desired channel is displayed..

5. MUTE

In SiriusXM mode, press the MUTE button to mute sound output, and press it again to resume sound output.

7. Storing a Channel as a Preset

In SiriusXM playing mode, tune to or direct tune to a channel which you want to store as a preset, then press MENU button to activate bottom navigation. It will highlight at SAVE, now press ENTER button. It will display the Global Preset List screen, press TUNE UP/DN button to select a preset number and press ENTER button to save current channel into Preset List. The Preset No. will display once the channel is saved. The unit will revert back to the previous display if no operation is performed in 5s.

Only displays when EQ / LOUD ON was selected in the Settings.

Dis play se quenc e: Cha nnel Nu mber Cha nnel Na me Cat egory N ame Art ist Nam e Son g Title Con tent In fo.

Only displays when the listening channel is a preset channel.

SAVE: DIRECT: To directly input a channel No. Cat.List: To display the Category List. P.LIST: To display the Global Preset List.

To save current channel into P.List.

SiriusXM signal

Radio Section Operation

1. To Select Radio mode

At Home Menu, press TUNE Up/Down button to move the highlight to Radio source, then press ENTER button to go into the Radio mode.

2. Radio Screen Description

Note: highlight movement indicated by the icon background change to two tone orange.

Only shows when the station is a Stereo Channel.

Displays EUR or USA to indicate the Area selected in the Settings.

Displays FM, AM.

Only displays when the station is a preset station.

Frequency Bar

Frequency Mark

SAVE: To save current frequency into P.List BAND: To select FM, AM P.LIST: Global Preset List

Only displays when EQ / LOUD ON was selected in the Settings.

Only displays in Manual Tune status.

Page 12

对折基准线

3. AREA Selection

At Home Menu, move highlight to Settings, press ENTER button, then press TUNE Down button to move highlight to AREA feature, press VOL Up or Down button to select between USA and EUR.

4. BAND Selection

6. Manual Tuning

In Radio playing mode, press MENU button to activate navigation, then press TUNE Down button to move highlight to BAND. Now press MENU button to toggle and select between FM or AM band.

. Auto Tuning

In Radio playing mode, press TUNE Up/Down button to activate auto tune. This results in automatically stopping at next station of sufficient signal strength.

In Radio playing mode, long press TUNE Up/Down button for 2s. This will activate manual tune with MANU display on the top area. Then repeatedly press TUNE Up/Down button to tune frequency by steps. NOTE: Radio will revert back to AUTO tune mode after 5s without operation.

7. Station Save

In Radio play mode, manually or auto tune to a station, then press MENU button to activate bottom navigation. Select SAVE icon and press ENTER button. The unit will display the Global Preset List screen, press TUNE UP/DN button to select a preset No. and press ENTER button to save current station into Preset List. The Preset number will display once the station is saved. The unit will go back to previous display if no operation in 5s.

8. Preset List

In Radio play mode, press MENU button to activate navigation, press TUNE UP/DN button to move highlight to P.List, then press ENTER button to display the Global Preset List.

Press TUNE Up or Down button to select a preset and press ENTER button to listen to it. This will let you preview the selected station for 10s before it reverts back to Radio screen. During this time, you can select another station with TUNE UP/DN button.

NOTE:

1. Receiver can store up to 18 stations.

2. If there is no operation at Global Preset List screen, it will go back to Radio screen by itself after 5s or simply long press MENU button for 2s to go back to previous display.

Radio Section Operation

SiriusXM Section Operation

1. What is SiriusXM

Only SiriusXM brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Sub scription are required. For more information, visit www.siriusxm.com

Activating your SiriusXM Subscription

2. To Select SiriusXM Mode

At Home Menu, press TUNE button to move the highlight to SiriusXM source, then press ENTER button to go into the SiriusXM mode. Note: highlight movement indicated by the icon background change.

After installing your SiriusXM Connect Tuner and antenna, power on your radio and select SiriusXM mode. You should be able to hear the SiriusXM preview channel on Channel 1. If you cannot hear the preview channels, please check the installation instructions to make sure your SiriusXM Connect tuner is properly installed.

For more information on how to install the SiriusXM Connect Vehicle tuner, consult the installation guide included with the tuner.

After you can hear the Preview channel, tune to Channel 0 to find the Radio ID of your tuner. In addition, the Radio ID is located on the bottom of the SiriusXM Connect Vehicle Tuner and its packaging. You will need this number to activate your subscription. Write the number down for reference. Note: the SiriusXM Radio ID does not include the letters I, O, S or F.

In the USA, you can activate online or by calling SiriusXM Listener care: Visit www.siriusxm.com/activatenow Call SiriusXM Listener Care at 1-866-635-2349

For Canadian Subscriptions, please contact: Visit www.siriusxm.ca/activatexm Call XM Customer Care at 1-877-438-9677

As part of the activation process, the SiriusXM satellites will send an activation message to your tuner. When your radio detects that the tuner has received the activation message, your radio will display:Subscription Updated, press Enter to continue. Once subscribed, you can tune to channels in your subscription plan. Note, the activation process usually takes 10 to 15 minutes, but may take up to an hour. Your radio will need to be powered on and receiving the SiriusXM signal to receive the activation message.