Pro-Signal ABI 028-12-RC Specification Sheet

ABI 028-12-RC Electromechanical
Indicator

Page 1 22/07/10 V1.0

http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk

Dimensions : Millimetres

Part Number Table

Description Part Number

Indicator, Audio ABI-028-12-RC

Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data
sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage
resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.
This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC pro-SIGNAL is the registered trademark of the Group. © Premier Farnell plc 2010.

Tolerance : ±0.5mm

Features:

••

Colour : Black.

••

Housing material : ABS.

••

Low frequency range.

••

Flange mounted with wire leads.

••

All data at 25ºC unless otherwise specified.

Specifications ABI 028-12-RC

Rated voltage 12V dc
Operating voltage 9 to 15V dc
Rated current*

≤25mA/12V dc

Sound output at 20cm*

≥75dB/6V dc
Resonant frequency 400 ±100Hz
Tone Continuous
Operating temperature -10 to +60ºC
Storage temperature -10 to +70ºC
Weight 10g

Note : *Value applying at rated voltage (DC)