Pro-Signal ABI-014-RC Specification Sheet

ABI-014-RC Specification Sheet

Page 1 22/07/10 V1.0

http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk

Features:

••

Colour : Black.

••

Housing material : ABS.

••

Flange mounted.

••

All data at 25ºC unless otherwise specified.

Dimensions : Millimetres

Part Number Table

Description Part Number

Indicator, Piezo ABI-014-RC

Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data
sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage
resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.
This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC pro-SIGNAL is the registered trademark of the Group. © Premier Farnell plc 2010.

Tolerance : ±0.5mm

Specifications ABI-014-RC – Piezo Indicator

Rated voltage 12V dc
Operating voltage 3 to 30V dc
Rated current at rated voltage 3mA
Sound output at 30cm, at rated voltage 80dBA
Resonant frequency 4500 ±500Hz
Tone Continuous
Operating temperature -20 to +60ºC
Storage temperature -30 to +70ºC
Lead Wire UL1007 AWG26
Weight 4g