Pro Series 44007 User Manual

SERIES 51®

Hitch Shown In Proper Position

Installation Instructions

Ford Light Duty

F-Series Trucks

Ford Supercrew Pickup Truck

Step bumper

Hitch type

Weight Distributing

Weight Carrying

Ball Mount

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

Max Gross

Trailer WT (LB)

Part Numbers:

51020
44007

Max Tongue

WT (LB)

1000 (454 Kg)10,000 (4540 Kg)

500 (227 Kg)5000 (2270 Kg)

Equipment Required:

Fastener Kit: 51020-051

Wrenches: 3/4, 7/8

Drill Bits: None

Frame rail

1
2

Wiring Access Location: PU1, PU2

3
4

Fasteners typical both sides

1

2

1. Scrape wax coating off of frame rails around the eight attachments.

2. Insert bolts and spacer in forward and rearmost attachment holes in each frame rail as show above.

3. Raise hitch into position and loosely attach fasteners to bolts as shown above.

4. Center hitch and install remaining fasteners as shown above.

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to
prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working
beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5
and SAE J684.

z 2002, 2006 Cequent Towing Products

Carriage Bolt 1/2-13 X 1-3/4Qty. (8)

SpacerQty. (8)

Tighten all 1/2-13 fasteners with torque wrench to 75 Lb.-Ft. (102 N*M)

3

4

Conical Washer 1/2Qty. (8)

Hex Nut 1/2-13Qty. (8)

Form: F205 Rev A 5-6-05

Rev. A6-27-06N51020Sheet 1 of 1