ProScan PSP264 Instruction Manual

BLUETOOTH TOWER
INSTRUCTION MANUAL
MODEL: PSP264
PLEASE READ CAREFULLY BEFORE OPERATING THIS EQUIPMENT
WARNING:
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not Installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING: To assure continued compliance, follow the attached installation instructions and use only shielded cables when connecting to other devices. Modifications not authorized by the manufacturer may void user`s authority to operate this device.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
1
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The
apparatus shall not be exposed to dripping or
splashing and that objects
filled with liquids, such
as vases shall not be placed on apparatus.
The lighting flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING:
Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit.
1) Read these instructions. All the safety and operating instructions should be read before the product is operated.
2) Keep these instructions. The safety
and operating instructions should be retained for future reference.
3) Heed all warnings. All warnings on the product and in the operating instructions should be adhered to.
4) Follow all instructions. All operating and use instructions should be followed.
5) Do not use this apparatus near water. Do not
use this product near water and moisture, for example: near a bathtub, washbowl, kitchen
sink or laundry tub; in a wet basement; or near a swimming pool.
6) Clean only with dry cloth. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners
. Use a dry cloth for cleaning.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating
. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat source. This product should not be placed in a built
-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.
9) Do not defeat the safety
purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the
obsolete outlet.
10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11)Only use attachments/accessories specified by the manufacturer.
12)Use only with
the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. An appliance and cart combination should be moved with care. Quick stop, excessive force and
uneven surfaces may cause the
appliance and cart combination to overturn.
13) Unplug this apparatus during lightning storms or when unused for long periods of time. To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable system. This
will prevent damage to the product due to lightning and power-line surges.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture does not operate normally, or has been dropped.
15) Power source This product should be operated only from the type of power source indicated on the marking label
. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other source, refer to the operation instructions.
For example, this unit may not have the capability to be connected to an outdoor antenna.
2
INSTALLATION
3
Assemble the wooden base to the main body by the supplied screws and washers.
1. Speakers
2. Base
3. Screws
4. Washers
Note:
2
1
3
4
MAIN UNIT
LOCATION OF CONTROLS
4
DC IN
D 2V A
ANT
DC IN
ANT
C 1 ,
1.2
1
2
3
4 5
6
7
8
9
10
11
12
13
1.USB CHARGE Port
2.AUX IN Jack
3.Indicator
4.SOURCE Button
5.EQ Button
6.POWER Button
7. Play/Pause Button
8.TUNE- (Previous) Button
9.TUNE+ (Next) Button
10.VOL+(Volume Up)
11.VOL-(Volume Down)
12.FM Antenna
13.DC IN Jack
1.2
D 2V AC 1 ,
1.21.2
~ Green: Radio ~ Blue: Bluetooth
4. During Playback: ~ Press the VOL (Volume) buttons to adjust volume level as desired. ~ Press the EQ button repeatedly to select and set equalizer mode as desired.
to shut off the unit if no using for long period of time.
NOTE: Pull out the AC/DC Adapter plug
GENERAL OPERATIONS
1. Insert the AC/DC Adapter plug into a conveniently located AC outlet having 100-240V~50/60Hz. The Indicator will light up Red.
2. Press the Power button on the unit or remote control to power on the unit.
corresponding color as below:
3. Press the SOURCE button repeatedly to switch to desired mode.The color of Indicator turns
to
5. When finished listening, press the Power button to power off the unit.The indicator will turn Red.
5
~ Press the or button to skip track. ~ Press the (Play/Pause) button to pause. Press again to resume normal playback.
~ Red: Standby
~ Violet: AUX IN
Loading...
+ 14 hidden pages