CXL122MP(A)
2-way, 12” / 2” (self-powered / bi-ampli ed) Multi Purpose Speaker / stage monitor
The PROPHON CXL122MP is a lightweight, two-way Multi Purpose speaker with a 12”-Neodymium woofer, and a coaxially
conical dispersion with a deticated built-in passive crossover network.
The coaxial design has many bene ts; true point-source, equal dispersion over the whole frequency range,
The cabinet is manufactured from high-quality,18 mm. multi-layer, nnish birch-plywood, using high precision fully computer-controled
The drivers are protected by a 1,5 mm thick, fully covering, perfored steel grille with a speaker foam in front,
The CXL122MP has four cargo restraint tracks for rigging, ying and installing, a monitor angle for use as a stage monitor,
Active, self-powered version
The CXL122MPA houses a 700W Ampli er with on-board DSP.
for changing setup)
High-Pass lter2 @ 95Hz, the same frequency responce as preset2, but cut at 95Hz,
for use as a stage monitor or as a top in an active sound system with subwoofers.
High-Pass lter1 @ 95Hz, for use as a stage monitor
Extended fullrange, for use as ”stand-alone” sound system,
with extended fullrange frequency responce.
Fullrange, using this preset the active version has the same frequency responce
Technical data
CXL122MP:
with 3”- voice coil
Tuned bassre ex
400W
frequency responce +/- 6dB
Vertical dispersion -6dB
Weight
400W - 800W
Applications
Accessories
Extended Technical data
Active version (A):
volume control
4) TOP / MONITOR 2 (HP-FILTER2)
Tel: +46 8 92 86 00, Fax: +46 8 623 07 98, Mail: info@prophon.se, web: www.prophon.com
W
D
Loading...