PROPHON B18HPA Instruction Manual

B18HPA

High Power, active 18” subwoofer with 2100W built-in ampliers
(2 x 1050W @ 8 Ohm)

Instruction manual V1,01

2014-05-01

PROPHON B18HPA - Instruction manual, presets and applications

Self-powered, High Power frontloaded, tuned bassreex,
Single 18” subwoofer

The Prophoon B18HPA comes with two separate built-in class-D ampliers with PFC (Power Factor Correction)
and on-board DSP processing, for a variaty of setups, congurations and applications.
Each amplier delivers 1050W into 8 ohms (Total of 2100W into 8 ohms) there are four presets to chose from,
depending on application and setup, (there are also different versions of the B18HPA, so make sure the PRESETS

match the corresponding text for the presets in the back of your B18HPA)

(The B18HPA are not to be used with 4 or 2 ohm load on the Speakon output connector.)

PRESET 1) SUB/SUB

This preset is used for also powering an additional passive B18HP.

- The rst amplier powers the internal woofer, and have a subsonic lter @ 30Hz , 24dB/oct,
and a LowPass-lter@95Hz, 24dB/oct. for use as a frontloaded subwoofer in most applications.

- The second amplier powers the Speakon output with 1050W (8ohm)
for using an extra passive B18HP, the DSP settings are identical as the internal.
In this conguration, 1pc of B18HPA and 1 pc of B18HP stacked (See image)
makes a powerful stack of a 2100W, 2x18” subwoofer.

PRESET 2) SUB/TOP1 (Live music)

This Preset enables the B18HPA to function as a subwoofer in an active sound system,
also supplying any of the prophon series of passive fullrange speakers
or multipurpose speakers with 1050W DSP processed power.

- The internal ampliers have a subsonic lter @ 30Hz , 24dB/oct,
and a LowPass-lter@95Hz, 24dB/oct. for use as a frontloaded subwoofer in most applications.

- The second amplier powers the Speakon output with 1050W (8ohm)
With LowPass lter @ 95Hz, for using a passive fullrange speaker or multipurpose speaker.

- Seperate volume controls enables a balanced and versatile system control,
where sub and top can be adjusted depending on use and room responce.

PRESET 3) CARDIOID SETUP

This preset uses advanced mathemathical DSP processings to create a cardioid dispersion pattern,
using an additional external passive B18HP in a xed position.

- Place a passive B18HP as in illustration, behind the self-powered B18HPA
at a distance of 93 cm. front to front

- Connect a speakon cable from speakon output in the active B18HPA to speakon input
in the passive B18HP.

- turn up the volume to full on both volume controls

- Ready to use your cardioid subwoofer system!

PRESET 4) SUB/TOP2 (Recorded music)

This Preset enables the B18HPA to function as a subwoofer in an active sound system,
also supplying any of the prophon series of passive fullrange speakers
or multipurpose speakers with 1050W DSP processed power.

- The internal ampliers have a subsonic lter @ 30Hz , 24dB/oct,
and a LowPass-lter@95Hz, 24dB/oct. for use as a frontloaded subwoofer in most applications.

- The second amplier powers the Speakon output with 1050W (8ohm)
With LowPass lter @ 95Hz, for using a passive fullrange speaker or multipurpose speaker.

- Seperate volume controls enables a balanced and versatile system control,
where sub and top can be adjusted depending on use and room responce.

93 cm.

Input power 230V AC, 50-60 Hz
(195-250V)
Neutrik Powercon blue connector
Max 16A load

Output power 230V AC, 50-60 Hz
Neutrik Powercon white connector
Max 16A load total, incl. input power

Balanced Neutrik XLR male input
(Gain: 10 kΩ Balanced to ground)

Balanced Neutrik XLR female
link out / through

Push button select
for chosing PRESETS 1-4

Neutrik Speakon output for connecting
external passive 8 ohm speaker.
(minimum impedance load 8 ohm! )

not to be used in 4 or 2 ohm load!

Volume potentiometer for
adjusting gain of the internal
subwoofer amplier

Volume potentiometer for
adjusting gain of the Speakon
output

Ventillation

Illustration and technical explanation of functions and features of the 2 x 1050W amplier module,
mounted in the back of each B18HPA.
The module is mounted in a closed separate self ventillated cabinet, with heat-controled fans.

Preset select indicator 1-4

Prophon Audio & Teknik AB | Stockholm | Sweden

Linjalvägen 10C, 187 66 Täby | P.O. BOX 7268, 187 14 Täby

Tel: [phone] | Mail: [e-mail] | Web: www.prophon.com