Intel
VTrak E-Class
C
ONNECTION
®
Modular Server
to
G
UIDE
Version 0.81
© 2008 Promise Technology, Inc. All Rights Reserved.
Intel® Modular Server Connection Guide
Modular Server-to-VTrak Connection
This document contains the following topics and tasks:
• Logical Drive and LUN Numbering Strategy (page 3)
• Prerequisites (page 3)
• Task 1: Log into Modular Server Control (page 4)
• Task 2: Enabling External Ports (page 6)
• Task 3: Attaching the SAS Cable (page 8)
• Task 4: Finding the VTrak’s IP Address (page 9)
• Task 5: Logging into WebPAM PROe (page 11)
• Task 6: Creating Logical Drives (page 13)
• Task 7: Associating LUNs and Initiators (page 16)
• Task 8: Installing an OS on a Blade Server (page 19)
®
This Guide describes how to connect an Intel
System (Modular Server) to a VTrak E610s or E310s subsystem (VTrak) to
expand the Modular Server’s data capacity. These instructions are limited to the
making the Modular Server-to-VTrak connection and related settings.
For information about setting up your VTrak, see the printed VTrak Quick Start
Guide or the VTrak Product Manual on the software CD that came with your
subsystem.
For information about setting up your Modular Server, see the Intel
Server System MFSYS25 Quick Start User’s Guide, the Modular Server System
MFSYS25 User Guide, and other related documents.
IT managers want the ability to assign LUNs to individual servers. On Modular
Server, you can do that easily in the Intel
GUI was not designed to work with an external storage device such as VTrak. As
a result, the GUI does not report the World Wide Number (WWN) of each
Compute Module (blade server). The WWN is used for the SAS initiator name,
and you need the initiator name to associate a LUN with a blade server.
The tasks in this document enable you to identify the WWN of each Modular
Server blade server and associate a LUN with the blade server using Promise
WebPAM PROe, the GUI that runs on VTrak.
MFSYS25 Modular Server
®
Modular
®
Module Server Control GUI. But the
2
Logical Drive and LUN Numbering Strategy
Logical Drive and LUN Numbering Strategy
A suggested strategy is to create a logical drive for each blade server. Each
logical drive has its own LUN. The LUN is 0 so the blade server can boot from it.
Blade Server Logical Drive LUN
Slot 1 LD1 LUN0
Slot 2 LD2 LUN0
Slot 3 LD3 LUN0
Slot 4 LD4 LUN0
Slot 5 LD5 LUN0
Slot 6 LD6 LUN0
This strategy is followed throughout this document. You are free to use a different
strategy that better meets your needs.
Prerequisites
The Modular Server-to-VTrak connection requires:
• Modular Server, setup and running with a network connection
• VTrak, setup and running with a network connection
• Networked PC workstation running Windows OS, to access Module Server
Control and WebPAM PROe
• SAS cable with SFF-8088 Mini-SAS external connectors. The cable must be
long enough to reach from your Modular Server to your VTrak.
• RJ11-to-DB9 serial data cable supplied with the VTrak. This cable is required
to verify the VTrak’s IP address
3
Intel® Modular Server Connection Guide
Task 1: Log into Modular Server Control
1. On your PC workstation, open Internet Explorer.
2. In the Address field, type https:// followed by the IP address of your Modular
Server, then press Enter.
The Modular Server Control (MSC) log-in screen appears.
3. In the MSC log-in screen:
•Type admin in the Username field.
•Type admin in the Password field.
• Click the Log In button.
The Username and Password are case sensitive.
Figure 1. MSC login screen
After log-in, the MSC Dashboard screen appears.
4
Figure 2. MSC Dashboard screen
Task 1: Log into Modular Server Control
5
Intel® Modular Server Connection Guide
Task 2: Enabling External Ports
The Modular Server has external ports that each blade server can access. The
port numbers correspond to the slot number of each blade server. To enable a
port is to enable the external data connection, in this case, to access a LUN on
the VTrak.
To enable the external ports:
1. In the MSC screen, click the Chassis Back tab.
2. Click the SCM 1 component in the enclosure graphic.
3. Click Expansion Port in the SCM 1 Actions menu.
Figure 3. MSC Chassis Back screen
Chassis Back tabSCM 1 Actions menuSCM 1
4. Check the box for Server 1 and click the Apply button.
Later in the process, you will return to this Task to enable another external
port, until all the ports are enabled. Enable just one port at a time.
6
Task 2: Enabling External Ports
Figure 4. MSC Expansion Port dialog box
Server 1’s external port is now enabled. It will appear as a SAS initiator in
WebPAM PROe. In “Task 7: Associating LUNs and Initiators” on page 16,
you will associate this port or initiator with a LUN.
What to do next
• If you are working through the Connection Guide for the first time, continue
with “Task 3: Attaching the SAS Cable” on page 8.
• If you are in the process of associating LUNs and initiators, go to “Adding an
Initiator” on page 16.
7
Intel® Modular Server Connection Guide
Task 3: Attaching the SAS Cable
1. Power off the VTrak.
2. Insert the SAS cable connector into the SAS port on Storage Controller 1.
3. Insert the other end of the SAS cable into one of the SAS data ports
(diamond icon) on the VTrak.
If you plan to attach a SAS cable to Storage Controller 2, be sure you
connected the other end of the cable to one of the SAS data ports (diamond
icon) on the other VTrak controller. See Figure 5.
Figure 5. Modular Server-to-VTrak SAS connections
SAS data ports (diamond icon)
Mgmt
UPS
115200
8 N 1
SAS ports on
Storage Controllers
Mgmt
UPS
115200
8 N 1
VTrak
Modular
Server
4. Power on the VTrak.
Flip the switch on both power supplies to the ON position.
8
Task 4: Finding the VTrak’s IP Address
Task 4: Finding the VTrak’s IP Address
You must first set up a serial connection between the VTrak and your PC. Then
you can run Microsoft HyperTerminal to access the VTrak’s command line
interface (CLI) to find the IP address.
This procedure requires the RJ11-to-DB9 serial data cable supplied with the
VTrak and includes the following actions:
• Setting up a Serial Connection (page 9)
• Accessing the VTrak’s CLI (page 9)
Setting up a Serial Connection
To set up a serial connection:
1. Attach the RJ11 end of the serial data cable to the RJ11 serial connector on
one of the controllers.
2. Attach the DB9 end of the serial data cable to a serial port on the PC.
Figure 6. The VTrak serial connector
RJ11 Serial
Mgmt
115200
8 N 1
UPS
Connector
Mgmt
UPS
115200
8 N 1
Mgmt
UPS
115200
8 N 1
Accessing the VTrak’s CLI
To access the VTrak’s CLI:
1. Change your terminal emulation program settings to match the following
specifications:
• Bits per second: 115200
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: none
2. Start your PC’s terminal VT100 or ANSI emulation program.
9
Intel® Modular Server Connection Guide
3. Press Enter once to launch the CLI.
4. At the Login prompt, type administrator and press Enter.
5. At the Password prompt, type password and press Enter.
At this point, you are in the CLI.
6. To view the IP address, type net and press Enter.
administrator@cli> net
===========================================
CId Port Type IP Mask Gateway Link
===========================================
1 1 Mgmt 192.168.10.85 255.255.255.0 192.168.10.1 Up
In this example, the VTrak’s IP virtual address is 192.168.10.85. Use this
address to log into WebPAM PROe.
10
Task 5: Logging into WebPAM PROe
Task 5: Logging into WebPAM PROe
To log into WebPAM PROe:
1. Launch your Browser.
2. In the Browser address field, type in the virtual IP address of the VTrak.
Use the virtual IP address you obtained in Step 4 (see page 9). Note that the
IP address shown below is only an example. The IP address you type into
your browser will be different.
Regular Connection
• WebPAM PROe uses an HTTP connection. . . . . . . . . . . . . . . .http://
• Enter the VTrak’s IP address . . . . . . . . . . . . . . . . . . . 192.168.10.85
Together, your entry looks like this:
http://192.168.10.85
Secure Connection
• WebPAM PROe uses a secure HTTP connection. . . . . . . . . .https://
• Enter the VTrak’s IP address . . . . . . . . . . . . . . . . . . . 192.168.10.85
Together, your entry looks like this:
https://192.168.10.85
3. When the log-in screen (Figure 21) appears:
•Type administrator in the User Name field.
•Type password in the Password field.
• Click the Login button.
The User Name and Password are case sensitive.
11
Intel® Modular Server Connection Guide
Figure 7. WebPAM PROe log-in screen
After sign-in, the WebPAM PROe opening screen appears. You are ready to
create your disk arrays and logical drives.
12
Task 6: Creating Logical Drives
Task 6: Creating Logical Drives
WebPAM PROe offers three methods of creating disk arrays and logical drives.
Two of these methods are suitable for Modular Server because they can create
multiple logical drives:
• Express – You choose the RAID characteristics and type of application.
Creates a disk array and logical drives based on your input. Faster.
• Advanced – You specify all parameters for the disk array and logical drives.
One logical drive will be created automatically. You can create additional
logical drives now or at a later time. More options. See page 14.
Express
To create a disk array and logical drives:
1. Click the Subsystem icon in Tree View.
2. Click the Disk Arrays icon.
3. Click the Create tab in Management View.
4. From the Create tab dropdown menu, choose Express.
5. Check the boxes to choose any one or combination of:
• Redundancy – The array will remain available if a physical drive fails
• Capacity – The greatest possible amount of data capacity
• Performance – The highest possible read/write speed
• Mixing SATA/SAS Drive – Check this box if you want to use both SATA
and SAS drives in the same disk array
If the box is unchecked, and you have both SATA and SAS drives,
different arrays will be created for each type of drive.
6. In the Number of Logical Drives field, enter the number of logical drives you
want to make from this disk array.
7. From the Application Type menu, choose an application that best describes
your intended use for this disk array:
•File Server
• Video Stream
• Transaction Data
• Transaction Log
•Other
8. Click the Update button.
Or check the Automatic Update box and updates will occur automatically.
13
Intel® Modular Server Connection Guide
The following parameters display:
• Disk Arrays – The number of physical drives in the disk array, their slot
numbers, configurable capacity, and the number of logical drives to be
created
• Logical Drives – The slot number of the logical drive(s), their RAID
level, capacity, and stripe size
For Modular Server, create six logical drives. Rename them LD1 through LD6
• Spare Drives – The physical drive slot number of the dedicated hot
spare assigned to this disk array (all RAID levels except RAID 0)
If you accept these parameters, proceed to the next step.
If you do NOT accept these parameters, review and modify your selections
in the previous steps.
9. When you are done, click the Submit button.
The new disk array appears in the Disk Array List the Information tab.
Advanced
To create a new disk array and logical drives:
1. Click the Subsystem icon in Tree View.
2. Click the Disk Arrays icon.
3. From the Create tab dropdown menu, choose Advanced.
Step 1 – Disk Array Creation
4. Enter an alias for the disk array in the field provided.
5. Check the box if you want to enable Media Patrol.
For more information, see “Media Patrol” on page 267.
6. Check the box if you want to enable PDM.
For more information, see “Predictive Data Migration (PDM)” on page 268.
7. Highlight physical drives you want in the disk array from the Available list and
press the >> button to move them to the Selected list.
You can also double-click them to move them.
8. When you are done, click the Next button.
Step 2 – Logical Drive Creation
Logical Drive Creation enables you to specify logical drives under the new disk
array. Enter the information for a logical drive, then click the Update button. If
14
Task 6: Creating Logical Drives
there is free capacity remaining, you can specify another logical drive now or wait
until later.
For Modular Server, create six logical drives. Name them LD1 through LD6.
9. Enter an alias for the logical drive in the field provided.
10. Choose a RAID level for the logical drive from the dropdown menu.
The choice of RAID levels depends the number of physical drives you
selected.
11. RAID 50 and 60 only – Specify the number of axles for your array.
For more information on axles, see “RAID 50 Axles” on page 245 or “RAID
60 Axles” on page 248.
12. Specify a Capacity and the unit of measure (MB, GB, TB).
This value will be the data capacity of the first logical drive in your new disk
array. If you specify less than disk array's maximum capacity, the remainder
will be available for additional logical drives which you can create later.
13. Specify a Stripe size from the dropdown menu.
64 KB, 128 KB, 256 KB, and 1 MB are available. 64 KB is the default.
14. Specify a Sector size from the dropdown menu.
512 B, 1 KB, 2 KB, and 4 KB are available. 512 B is the default.
15. Specify a Read (cache) Policy from the dropdown menu.
Read Cache, Read Ahead Cache, and No Cache are available. Read Ahead
is the default.
16. Specify a Write (cache) Policy from the dropdown menu.
Write Back and Write Through (Thru) are available. Write Back is the default.
17. From the Preferred Controller ID dropdown menu, choose a controller.
The choices are Controller 1 or 2, or Automatic. This feature is only available
on subsystems with two controllers and LUN Affinity enabled.
18. Click the Update button.
A new logical drive is displayed under New Logical Drives.
Repeat the above steps to specify additional logical drives as desired.
19. When you are done specifying logical drives, click the Next button.
Step 3 – Summary
The Summary lists the disk array and logical drive information you specified.
20. To proceed with disk array and logical drive creation, click the Submit
button.
The new disk array appears in the Disk Array List the Information tab.
15
Intel® Modular Server Connection Guide
Task 7: Associating LUNs and Initiators
A LUN represents a logical drive on the VTrak. An initiator represents a blade
server in the Modular Server. Each blade server uses LUN0 for booting and
storage. This task includes the following actions:
• Enabling LUN Masking (page 16)
• Adding an Initiator (page 16)
• Adding a LUN Map (page 17)
• Editing a LUN Map (page 17)
Enabling LUN Masking
LUN masking is the process of applying a LUN Map so that each initiator can
only access the LUNs specified for it. You only have to perform this action one
time.
To enable the LUN Masking:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the Storage Services icon.
4. Click the LUN Map tab in Management View.
5. Click the LUN Masking Enabled box.
4. Click the Submit button.
Adding an Initiator
You must add an initiator to the VTrak's initiator list before you can associate the
initiator with a LUN. You must repeat this action for each initiator.
To add an initiator:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the SAS Management icon.
4. In Management View, click the Initiators tab.
A list of all currently logged-in initiators appears the screen.
5. Check the box to the left of the initiator you want to add.
6. Click the Add to Initiator List button.
The initiator is added to VTrak’s list.
16
Task 7: Associating LUNs and Initiators
What to do next
• If you do not have a LUN Map, continue with “Adding a LUN Map” below.
• If you have a LUN Map, continue with “Editing a LUN Map” below.
Adding a LUN Map
A LUN map associates LUNs and initiators.
To add the LUN Map:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the Storage Services icon.
4. Click the LUN Map tab in Management View and from the dropdown menu,
choose Add a LUN Map.
5. Choose the initiator from the Initiator dropdown list.
An initiator takes its named from the WWN of the blade server.
6. In the LUN Mapping & Masking list, enter LUN0 for logical drive LD1.
7. Click the Submit button.
The blade server in slot 1 is now associated with logical drive LD1.
What to do next
• Go back to “Task 2: Enabling External Ports” on page 6 and enable one
more External Port.
Editing a LUN Map
This action associates LUNs and initiators.
To edit the LUN Map:
1. Click the Subsystem icon in Tree View.
2. Click the Administrative Tools icon.
3. Click the Storage Services icon.
4. Click the LUN Map tab in Management View.
5. From the LUN Mapping & Masking Information list, choose the new initiator
that just appeared and click its link.
6. In the LUN field, enter LUN0 for each logical drive.
Specify logical drives LD2 though LD6, in order, one logical drive for each
initiator.
7. Click the Submit button.
17
Intel® Modular Server Connection Guide
This action completes the association of the blade servers in slots 2 through 6
with logical drives LD2 through LD6, respectively.
What to do next
• Go back to “Task 2: Enabling External Ports” on page 6 and enable one
more External Port until all the ports have been enabled.
18
Task 8: Installing an OS on a Blade Server
Task 8: Installing an OS on a Blade Server
In this case, the phrase installing an OS on a blade server refers to installing the
OS onto the VTrak LUN assigned to the blade server.
Connections required to boot the blade server and install the OS are made
through the 15-pin video connector and two USB connectors on the front panel.
This procedure requires a monitor, keyboard, mouse, and an external CD drive
with a USB 2.0 interface.
To install an OS on a blade server:
1. Power off the blade server.
Press the power button on the front panel. See Figure 8.
2. Attach a monitor, keyboard and mouse, and CD drive to the blade server.
3. Power on the monitor, CD drive, and blade server.
To power on the blade server, press the power button on the front panel. See
Figure 8.
4. Insert the OS installer CD in the CD drive.
5. Follow the prompts for OS installation.
Be sure you install the OS onto LUN 0.
6. Reboot the blade server.
7. Enter BIOS setup and set the boot order to boot from LUN 0 first.
8. Exit the BIOS setup.
This completes OS installation on this blade server. Repeat the installation on
your other blade servers as required.
Within Windows, you might have to bring the physical drives online to enable
them.
Figure 8. Modular Server blade server
USB connectors Power buttonVideo connector
19
Intel® Modular Server Connection Guide
20
Loading...