VTrak Jx30 Series
Robust, high-availability 6G SAS JBOD Storage Expansion Platform
with Single or Dual I/O modules
As the demands for capacity expansion of digital media continues to explode, IT
infrastructures and its growing complexities have become increasingly difcult to
manage. With no end in sight of this storage boom, IT administrators are faced
Jx30 Series
6G SAS / SATA JBOD Storage Expansion Platform
with nding a robust storage expansion platform to serve as a building block
to provide high-availability, exibility and energy-efciency in a cost effective
package that meets their application demands.
Delivering a reliable enterprise-level storage architecture
The VTrak Jx30 series 6G SAS subsystems deliver a high performance SAS
solution with advanced enterprise level reliability and functionality. Delivered in
a Storage Bridge Bay (SBB) 2.0 compliant package, the Jx30 series offers the full
redundancy that is expected of an enterprise solution. Dual active-active JBOD
I/O modules allow for redundant data paths to ensure data availability while
dual power supplies and cooling fans are in place to minimize downtime and any
disruption to business continuity.
6G SAS Performance
Providing up to 24Gb/s of bandwidth over the external multilane 6G SAS host
interface, the VTrak Jx30 series allows storage applications to access their
data at blistering speeds. The 6G SAS architecture paves the way for immense
available bandwidth to support the ood of unstructured data now owing
across networks today. Fully backward compatible with 3G SAS/SATA devices,
users have the ability to deploy 3G and 6G SAS/SATA hard drives and solid state
devices (SSD) in the Jx30 series.
GreenRAID
Promise cares about the environment. VTrak products utilize environmentally
friendly production methods and materials as well as a high-efciency design
that saves energy. Sporting 80 Plus Bronze Certied power supplies offering
up to 85% power efciency, the VTrak Jx30 series products improve total
cost of ownership by conserving power, reducing heat output and improving
cooling costs. The internal 6G SAS expander-based architecture also allows
for transparent access to each drive, enabling full utilization of the power
management features built into modern hard drives.
Service and Support
Every VTrak Jx30 subsystem is backed by the Promise 3-Year limited warranty
with 24/7 (Americas & EMEA) telephone and email support. In addition to our
industry leading warranty, Promise offers extended warranty and onsite parts
replacement options with service levels with response times as low as 4 hours.
TM
VTrak J-Class Models
I/O Module 3U/16- Bay 4U/24- Bay
Single
VTJ630sS VTJ830sS
Dual
VTJ630sD VTJ830sD
Highlights
::
3U-16 or 4U-24 form factor featuring hot-
swappable drive bays in SBB 2.0 package
::
Supports 6G and 3G SAS & SATA drives
simultaneously
::
Dual active/active SAS JBOD I/O modules
::
Provides up to 85% power efciency
::
Up to four 6G mini SAS (4x) ports, two
ports per I/O module
::
Redundant, hot-swappable Field Replaceable
Units (FRUs)
::
SES-2 compliant enclosure management
::
Compatible with leading SAS & SATA drives,
HBAs and RAID controllers
VTrak Jx30 Series Specications
JBOD I/O Module Features
3U-16 Bay 4U-24 Bay
Model Numbers - Single I/O VTJ630sS VTJ830sS
Model Numbers - Dual I/O VTJ630sD VTJ830sD
Drive Support Up to sixteen 3.5/2.5” HDDs or SSDs Up to twenty-four 3.5/2.5” HDDs or SSDs
SAS 6 Gb/s, 3Gb/s, SATA 6G/s, 3Gb/s and 1.5Gb/s
Supports any mix of SAS and SATA drives simultaneously in the same enclosure
For a list of compatible drives, visit http://www.promise.com/
External I/O Ports Each SBB 2.0 I/O module has two SAS ports using industry standard Mini SAS 4x wide-port-SAS
connectors (SFF-8088), one IN and one OUT for cascading JBODs
SAS Features
ANSI T10 SAS 2.0 and 2.1 Compliant
Expander Management
Features
Self-conguring expander supports full SAS domain topology management•
SMP – SAS Management Protocol•
In-band access to Expander and PHY information•
Statistic counters and performance monitors•
SES EM – SES Enclosure Management (ANSI T10 SES 2 Compliant)•
SCSI SES command set over virtual SSP device•
System Management
Management Interfaces LED status indicator support for drives, FRU and enclosure environmentals
Enclosure Management
Protocols
In-band SES enclosure management alerts user to out of spec operation: thermal condition, voltage
condition or component failures, protecting data and hardware
Full subsystem management CLI through out-of-band RS232 serial port
SES over in-band SAS
Mechanical Specication
Voltage 100-240 Vac Auto-Ranging
Current (Maximum) 15 A @ 110 Vac; 6 A @ 240 Vac
Power Conversion Efciency >80% @ 110V (>20% load), >80% @ 240V (>20% load)
Temperature Range Operational: 5° to 40°C
Non-Operational: -40° to 60°C
Humidity Operational: 10% to 90% (Non-Condensing)
Non-Operational: 5% to 95% (Non-Condensing)
Acoustic Noise Levels 55 dB (Typical)
65 dB (Maximum)
Shock Operational: 5G, 11 mS duration
Non-Operational: 10G, 11mS duration
Vibration Operational: 0.3G, 5 to 500 Hz
Non-Operational:: 1G, 5 to 500 Hz
Safety CE, FCC Class A, UL/cUL, TUV, BSMI Class A, VCCI Class A, CB, KCC, NOM, GOST-R, IRAM,
C-Tick, S-Mark
Environmental Standards RoHS, GreenPC, WEEE
3U-16 Bay 4U-24 Bay
Power Supply Dual 580W, 100-240 Vac auto-ranging, 50-60 Hz,
dual hot swap and redundant with PFC, N+1
design
Dimensions (H x W x D) 13.1 x 44.7 x 50.7 cm
5.2 x 17.6 x 19.96 in
Dual 750W, 100-240 Vac auto-ranging, 50-60 Hz,
dual hot swap and redundant with PFC, N+1
design
17.4 x 44.7 x 50.7 cm
6.9 x 17.6 x 19.96 in
Weight 24 kg / 52.9 lbs (w/o drives) 26 kg / 57.3 lbs (w/o drives)
Warranty and Support
Warranty
Support
©2009, Promise Technology, Inc. All rights reserved. The information given in this document is for informational purposes only and is not intended to be provided as a basis for a warranty. The products and their
details are subject to change and Promise Technology, Inc. reserves the right to make changes to this document at any time. http://www.promise.com/ v1.01 | 11/05/2009 P/N 000000000000000
Three year complete system limited warranty with advanced parts replacement; optional extended
warranty; optional onsite parts replacement program
24/7 email and phone support (English only); 24/7 access to Promise support site-drivers, rmware
and compatibility lists
Jx30 Series
6G SAS / SATA JBOD Storage Expansion Platform
:: Promise USA
Milpitas, CA
Tel: 1-408-228-1400
E-mail: sales@promise.com
:: Promise EMEA
Son, The Netherlands
Tel: 31-40-235-2600
E-mail: sales@eu.promise.com
:: Promise China
Beijing, China
Tel: 86-10-8857-8085 or 8095
E-mail: sales@cn.promise.com
:: Promise Germany
Dortmund, Germany
Tel: 49-02-31-56-76-48-0
E-mail: sales-de@eu.promise.com
:: Promise Japan
Tokyo, Japan
Tel: 81-03-6801-8063
E-mail: sales@jp.promise.com
:: Promise Italy
Rome, Italy
Tel: 0039-06-3671-2626
E-mail: sales-it@eu.promise.com
:: Promise Taiwan
Hsin-Chu, Taiwan
Tel: 886-3-578-2395
E-mail: sales@tw.promise.com
:: Promise UK
Workingham United Kingdom
Tel: 44-0-870-112-59-77
E-mail: sales@eu.promise.com
:: Promise Australia
Sydney, Australia
Tel: 61-2-8678-5336
E-mail: sales@au.promise.com