5 Commonwealth Ave
Woburn, MA 01801
Phone 781-665-1400
Toll
Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
RANGER
RANGER
RANGER
TV AND SATELLITE ANALYZER
Neo
Neo
Neo
2
3
4
-0 MI2130 -
SAFETY NOTES
Read the user’s manual before using the equipment, mainly "SAFETY RULES"
paragraph.
The symbol on the equipment means "SEE USER’S MANUAL". In this manual may
also appear as a Caution or Warning symbol.
WARNING AND CAUTION statements may appear in this manual to avoid injury
hazard or damage to this product or other property.
ELECTRONIC MANUAL VERSION
You can access instantly to any chapter by clicking on the title of the chapter in the table
of contents.
Click on the arrow
Click on video boxes
At Index click on page number to access the subject.
at the top right page to return to the table of contents.
to access video-tutorial on PROMAX youtube channel.
USER’S MANUAL VERSION
Manual Version Web Publication Date Firmware Version
F6.0 March 2021 29.5
Please update your equipment to the latest software version available.
This user's manual describes operation for models RANGER
3 and RANGER
and in certain sections explicitly.
Screen captures of current manual are from the RANGER
Neo
4. Differences between them are specified by an asterisk (*)
Neo
Neo
2, RANGER
3.
Neo
WHAT’S NEW on manual F6.0
•New tool: Task Management from webControl (“Task Management” on
page 235).
•New tool (optional): Mask Monitoring from webControl (“
page 221).
•Update: Monitoring total time counter and cycle time counter on the quality
signal monitoring from webControl (“
? Screen Description” on page 220).
i
Mask Monitoring” on
•Update: On TV Parameters from webControl if DAB contains images they are also
shown (“
•Update: Polarization for satellite band it is also saved in datalogger (“
Datalogger” on page 264).
•New option (optional): High Frequency (“
page 305).
•Update: New options on webControl (About Equipment; current installation
folder; GPS coordinates) (“
•Update: FM Advanced measurement and DAB advanced measurement are shown
on webControl (for meters with this option installed) (“
page 212).
•Update: FM Advanced measurement and DAB Advanced measurement are saved
in datalogger (for meters with these options) (“
•Update: FM Advanced measurement and DAB Advanced measurement are
shown in signal monitoring and signal coverage (for meters with these options)
Signal Monitoring” on page 110).
(“
•New option: Power off from menu (“
•Update: Power and MPX deviation from FM Advanced option can be selected as a
main measurement (for meters with this option installed).
•New preference: Time setting by means of NTP protocol (“
page 53).
•Update: On Installation Manager, when selecting a channel plan it shows its
version (“
•Update: Previous to start a Signal Coverage or Drive Test, it shows the reference
level to be used during measurement (“
•Update: On Discover FM Stations, each channel is named after its service name
(“
Menu Options” on page 141).
•Others: Other minor updates and improvements.
? Screen Description” on page 213).
HIGH FREQUENCY OPTION” on
? Screen Description” on page 212).
? Screen Description” on
Datalogger” on page 128).
Switching On/Off” on page 16).
?NTP Options” on
Installation Management” on page 202).
Signal Coverage” on page 118)
?
PREVIOUS VERSIONS OF USER’S MANUAL
Manual Version Web Publication Date Firmware Version
F5.1 September 2020 28.5
F5.0 September 2019 28.0
F4.0 May 2019 27.2
F3.0 March 2018 26.3
F2.0 January 2018 25.0
WHAT’S NEW on manual F5.1
•New option: Advanced FM (“ADVANCED FM OPTION” on page 299).
ii
WHAT’S NEW on manual F5.0
•New tool: Channel plan edition from webControl (“Channel Plan Editor” on
page 234).
•New tool: PDF report creation from webControl (“
button):” on page 231).
•Update: New parameters available when creating a channel plan from
webControl (“
•Update: In webControl, the TV Parameters screen allows listening to FM or DAB
audio (“
•New option: It allows rebooting the meter from webControl (“
Spectrum” on page 211).
•New preference: Using a hard drive for webcontrol monitoring (“
on page 50).
•New tool (Advanced DAB option): DAB TII with info about transmitters and PRS
and null symbols (“
•Update (Advanced DAB option): New fields in DAB 3/3 (“
page 288).
•Update (Advanced DAB option): More data in the status bar (“
Mode” on page 284).
•Update: Ethernet communication specs (“
•Update: DAB specs (“
•Update: Available SID identifier in hexadecimal format (“
on page 48).
TV Parameters” on page 213).
Channel Plan Creator” on page 233).
DAB TII” on page 293).
? Inputs and Outputs” on page 253).
? DAB / DAB+ Advanced” on page 266).
? Options Menu (mouse right
Measurements and
?Tools Options”
DAB Mode” on
Measurement
?Appearance Options”
WHAT’S NEW on manual F4.0
•New tool: File Manager from webControl (“File Manager” on page 230).
•New tool: Channel Plan Creator from webControl (“
page 233).
•New tool: Service Recording / TS from webControl (“
page 213).
•New tool: Password Recovery from webControl (“
page 211).
•Update: New icon when the meter is connected to the webControl (“
Remote Access” on page 208).
•New setting: 22 kHz Tone Position (“
•New preference: SMTP e-mail server settings (“
•New option: Advanced DAB (“
•Update: Date and time are updated when locking a GPS signal (“
Coverage” on page 118).
•New option: Schedule for signal monitoring and coverage (“
page 113).
•Update: DAB/DAB+ screens (“
•Update: Datalogger shows profile and PLP number for DVB-T2 channels
(“
Datalogger” on page 128).
•Update: The Task Planner can run and stop alarm monitoring (“
page 147).
ADVANCED DAB/DAB+ OPTION” on page 283).
DAB / DAB+” on page 84).
?Measurement Options” on page 49).
?SMTP Options” on page 53).
Channel Plan Creator” on
TV Parameters” on
? Password Recovery” on
Settings and
Signal
Settings” on
Task Planner” on
iii
•Update: The IP by default for the meter to connect via Ethernet using webControl
or Netupdate is 10.8.8.188 (for previous firmware versions it was 10.0.6.198)
Settings and Remote Access” on page 208).
(“
•Update: System messages are saved as alarms on the webControl monitoring
tool (“
•Update: TV 3/3 screen and IPTV 3/3 screen show more service features (“
SERVICE DATA (TV 3/3)” on page 76).
•Update: Transport Stream Recording (“
page 163).
•Update: Transport Stream Specifications (“
•Update: Compatible with standard DCII (“
•Update: Last spectrum settings recovered after switching on (“
in Spectrum Analyzer Mode:” on page 63).
•Update: Improvement of Optical option annex (“
page 270).
•Update: New section “LTE Signals” (“
•Update: New annex for RACK models (“
•Update: Code Rate DVB-S2 Specifications (“
•Update: Boot screen option removed (on Preferences/Appearance).
Historical Monitoring” on page 226).
? TV +
Transport Stream Recording” on
? Transport Stream” on page 262).
? DCII (DigiCipher 2)” on page 259).
?Advanced Menu
OPTICAL OPTION” on
LTE Signals” on page 89).
RACK OPTION” on page 307).
? DVB-S2” on page 258).
WHAT’S NEW on manual F3.0
•Updated: Change of name Webserver for webControl.
•New tool: webControl Monitoring (“
•New tool: webControl Historical Monitoring (“
page 226).
•Updated: Mouse as a touch on screen on webControl console.
•New Signal Source: CCTV (“
•New preference: Offset for power/level (“
•New setting: Touch panel calibration (“
•New preference: SNMP protocol settings (“
•Updated: It allows disable LNB when short-circuit (“
terrestrial and satellite band)” on page 43).
•Updated: Notification when problem during TS recording.
•Updated: It allows recording a TS file bigger than a 1 GB.
•Updated: Frequency marker displays values until Hz.
•Updated: In Signal Monitoring/Coverage user can start even if signal is unlocked.
•Updated: In Signal Monitoring/Coverage shows the file name on screen.
•Updated: In Signal Monitoring/Coverage by channel plan the “span time” setting
has been removed.
•Others: Other minor updates and improvements.
? Signal Source” on page 42).
Monitoring” on page 216).
Historical Monitoring” on
?Measurement Options” on page 49).
?Appearance Options” on page 48).
?SNMP Options” on page 52).
?LNB Drain (available for
WHAT’S NEW on manual F2.1
•Updated: SPAN values (“Spectrum Analyzer Mode” on page 260).
iv
WHAT’S NEW on manual version F2.0
•Improvement: RANGER Neo 4 model included.
•Improvement: Joystick section (“
•New option: Stealth-ID ON/OFF (“
•Improvement: Specific chapter for TOOLS (“
•New option: Signal Monitoring for Channel plan (“
page 110).
•New setting: GPS Alarm setting (“
•New tool: Service Recording (“
•New tool: Tilt (“
•New tool: Scan (“
•New tool: Streaming V/A (“
•Improvement: WiFi chapter (“
•Improvement: IPTV chapter (“
•New chapter: OTT signal (“
•New chapter: webControl tool (“
•Improvement: Ethernet Port (“
•Specifications unified for all models (“
on page 253).
•Improvement: Additional Information Annex (“
page 311).
•Improvement: Index by keywords (“
Tilt” on page 171).
Scan” on page 172).
Streaming V/A” on page 174).
OTT ” on page 197).
Joystick” on page 35).
?Stealth-ID” on page 60).
TOOLS” on page 91).
Signal Coverage” on page 118).
Service Recording” on page 169).
WIFI MONITORING” on page 176).
IPTV ” on page 184).
WEBCONTROL” on page 208).
Ethernet Port” on page 240).
SPECIFICATIONS RANGER Neo 2 / 3 / 4”
ADDITIONAL INFORMATION” on
INDEX” on page 313).
Signal Monitoring” on
v
SAFETY RULES
* The safety could not be assured if the instructions for use are not closely
followed.
* Use this equipment connected only to systems with their negative of
measurement connected to ground potential.
* The AL-103 external DC charger is a Class I equipment, for safety reasons plug it to
a supply line with the corresponding ground terminal.
* This equipment can be used in Overvoltage Category I installations and Pollution
Degree 2 environments.
* External DC charger can be used in Overvoltage Category II, installation and
Pollution Degree 1 environments.
* When using some of the following accessories use only the specified ones to ensure
safety:
Rechargeable battery
External DC charger
Car lighter charger cable
Power cord
* Observe all specified ratings both of supply and measurement.
* Remember that voltages higher than 70 V DC or 33 V AC rms are dangerous.
* Use this instrument under the specified environmental conditions.
* When using the power adaptor, the negative of measurement is at ground
potential.
* Do not obstruct the ventilation system of the instrument.
* Use for the signal inputs/outputs, specially when working with high levels, appropriate
low radiation cables.
* Follow the cleaning instructions described in the Maintenance paragraph.
vi
SAFETY SYMBOLS
DESCRIPTIVE EXAMPLES OF OVER-VOLTAGE CATEGORIES
* Cat I: Low voltage installations isolated from the mains.
* Cat II: Portable domestic installations.
* Cat III: Fixed domestic installations.
* Cat IV: Industrial installations.
CAUTION: The battery used can present danger of fire or chemical burn if it is
severely mistreat. Do not disassembly, cremate or heat the battery
above 100 °C under no circumstances.
vii
TABLE OF CONTENTS
1. INTRODUCTION ........................................................................................ 1
1.1. Description............................................................................................ 1
2. SETTING UP .............................................................................................. 3
2.1. Package Content .................................................................................... 3
2.2. Power................................................................................................... 3
2.3. Equipment Details .................................................................................. 7
2.4. Switching On/Off...................................................................................16
2.6. Screen Icons and Dialog Boxes................................................................17
2.5. Reset...................................................................................................17
2.7. Menu Tree............................................................................................18
2.8. Controls...............................................................................................26
3. SETTINGS AND PREFERENCES................................................................. 41
3.1. Settings Menu.......................................................................................41
3.2. Video & Audio Settings...........................................................................45
3.3. Preferences Menu.................................................................................. 46
4. RF SIGNAL TUNING................................................................................. 54
4.1. Introduction .........................................................................................54
4.2. Operation.............................................................................................54
4.3. General Menu Options............................................................................55
4.4. Advanced Options .................................................................................63
4.5. Screen Description ................................................................................65
4.6. Additional Functions ..............................................................................80
5. TOOLS..................................................................................................... 91
5.1. Introduction .........................................................................................91
5.2. Constellation ........................................................................................92
5.3. LTE Ingress Test ...................................................................................95
5.4. Echoes.................................................................................................98
5.5. MER by Carrier....................................................................................100
5.6. MEROGRAM........................................................................................102
5.7. Spectrogram.......................................................................................104
5.8. Attenuation Test .................................................................................107
5.9. Signal Monitoring ................................................................................110
5.10. Signal Coverage........................... ...................................... ...............118
5.11. Datalogger .......................................................................................128
5.12. Screen and Data Capture (Export key) .................................................135
5.13. Explore Channel Plan ............................................................. ............137
5.14. Discover FM Stations..........................................................................140
5.15. Field Strength ....................................... ..................................... .......142
5.16. Task Planner............................................... ..................................... .147
5.17. Transport Stream Analyzer .................................................. ...............151
5.18. Transport Stream Recording ...............................................................163
5.19. Network Delay Margin...................................................... ..................166
5.20. Shoulders Attenuation........................................................................167
5.21. Service Recording................. ..................................... ........................169
5.22. Tilt .................................. ................................................................171
5.23. Scan................................................................................................172
5.24. Streaming V/A ..................................................................................174
6. WIFI MONITORING............................................................................... 176
6.1. Introduction .......................................................................................176
viii
6.2. Operation...........................................................................................176
6.3. WiFi Access Point Connect ....................................................................177
6.4. WiFi Spectrum ....................................................................................177
6.5. Site Survey ........................................................................................181
7. IPTV ..................................................................................................... 184
7.1. Introduction .......................................................................................184
7.2. Operation...........................................................................................184
7.3. Screen Description ..............................................................................185
7.4. Tools .................................................................................................191
7.5. Settings.............................................................................................194
8. OTT ...................................................................................................... 197
8.1. Introduction .......................................................................................197
8.2. Operation...........................................................................................197
8.3. Screen Description ..............................................................................198
9. INSTALLATIONS MANAGEMENT............................................................. 201
9.1. Introduction .......................................................................................201
9.2. Operation...........................................................................................201
9.3. Installation Management......................................................................202
9.4. New Installation..................................................................................205
9.5. Tools .................................................................................................205
9.6. Importing Data from USB.....................................................................206
10. WEBCONTROL ..................................................................................... 208
10.1. Introduction......................................................................................208
10.2. Settings and Remote Access ...............................................................208
10.3. Measurements and Spectrum.......................... ....................................211
10.4. TV Parameters ..................................................................................213
10.5. Remote Console ............................................... .................................214
10.6. Monitoring............................................................. ...........................216
10.7. Historical Monitoring ..........................................................................226
10.8. Installations Management................................................. ..................230
10.9. Task Management .............................................................................235
11. CONNECTING TO EXTERNAL DEVICES ............................................ ..... 238
11.1. Introduction......................................................................................238
11.2. USB Port ............................................................... ...........................238
11.3. Ethernet Port ...................................................... ..............................240
11.4. HDMI Port .................................................... ....................................243
11.5. Input Jack Connector .........................................................................244
11.6. RF Connector....................................................................................245
11.7. Common Interface Slot ......................................................................249
11.8. TS-ASI Port ......................................................................................250
12. SPECIFICATIONS RANGER Neo 2 / 3 / 4........... .................................. 253
12.1. General............................................................................................253
12.2. Measurement Mode........................................................................... .256
12.3. Spectrum Analyzer Mode ....................................................................260
12.4. TV Mode............ ........................................................................ .......261
12.5. WiFi Analyzer Mode 2.4 GHz................................................................262
12.6. IPTV Mode............................................ ............................................262
12.7. Tools ...............................................................................................263
12.8. Options................................................ ............................................265
13. MAINTENANCE ............................... ..................................................... 268
13.1. Instructions for Returning by Mail ........................................................268
ix
13.2. Considerations about the Screen..........................................................268
13.3. Cleaning Recommendations ................................................................268
i. OPTICAL OPTION ................................................................................... 270
ii. ADVANCED DAB/DAB+ OPTION ............................................................ 283
iii. ADVANCED FM OPTION ........................................................................ 299
iv. HIGH FREQUENCY OPTION................................................................... 305
v. RACK OPTION....................................................................................... 307
vi. ADDITIONAL INFORMATION ................................................................ 311
vii. INDEX ................................................................................................. 313
x
TV AND SATELLITE ANALYZER
1 INTRODUCTION
1.1 Description
The new RANGER
launches. As each new generation, it represents an evolution from the previous,
since it integrates the latest technological innovations and develops applications
for the new demands and needs that have emerged in recent years.
The new RANGER
experience. From its ergonomic design and stylized lines to the reduction of keys
and the easy use of its interface, everything has been designed so the user has
a simple tool to use but powerful and useful.
RANGER
RANGER
RANGER
Neo
is the seventh generation of field meters that PROMAX
Neo
has been created with the aim to make easy the user
Neo
Neo
Neo
2
3
4
Figure 1.
Neo
The RANGER
popular standards of the DVB family, as well as formats such as MPEG-2, MPEG4, HEVC... and Dolby audio.
Besides the basic functions of TV meter and spectrum analyzer for terrestrial and
satellite band, it provides additional tools, such as the detection of LTE signal
Chapter 1: INTRODUCTION 1 March 2021
is a universal analyzer that covers several of the most
interferences (some of its working frequencies are close to the TV bands), the
diagrams constellations or the echoes detection.
The RANGER
installation. This feature helps the user to manage information generated so he
can access it at any time or download it to a PC for further analysis.
The RANGER
DAB than differ from the RANGER
with DAB option). The RANGER
functions includes 4K real-time video decoding. All models can be expanded to
work with Fibre Optics or WiFi 5G and LTE 2.6 GHz.
In an effort to facilitate its work to professionals, our long experience ensures
an after sales quality service, which includes software updates and upgrades for
free.
The RANGER
Union. A multidisciplinary team of highly qualified professionals has dedicated
effort and commitment to the development of a powerful, efficient and reliable
tool. During the manufacturing process, all used materials have been subjected
to a strict quality control.
Neo
Neo
Neo
has an application to manage data generated at each
3 has some extra tool s such as T2MI, Network Delay and
Neo
2 (RANGER
Neo
4 in addition to all RANGER
has been designed and developed entirely in the European
Neo
2 can be expanded
Neo
3
Figure 2.
March 2021 2 Chapter 1: INTRODUCTION
2 SETTING UP
2.1 Package Content
Check that your package contains the following elements:
RANGER
Neo
Analyzer.
External DC charger.
Mains cord for external DC charger.
Car lighter charger.
*
GPS
receiver.
Dual WiFi Antenna.
USB WiFi Adapter.
Aero SMA-H/BNC-M adapter.
“F” adapters:
•“F”/f - BNC/f adapter.
•“F”/f - DIN/f adapter.
•“F”/f - “F”/f adapter.
Support belt and carrying bag.
4V/RCA Jack Cable.
USB (A) - USB (A) cable.
Monopod.
Transport suitcase.
Quick Start Guide.
NOTE: Keep the original packaging, since it is specially designed to protect the
equipment. You may need it in the future to send the analyzer to be
calibrated.
2.2 Power
Neo
The RANGER
high quality and long operation time.
*. only available for RANGER Neo 3 and RANGER Neo 4.
is powered by a 7.2 V built-in rechargeable Li-Ion battery of
Chapter 2: SETTING UP 3 March 2021
This equipment can operate on battery or connected to the mains using a DC
adapter. An adapter is also supplied to use with the power connector car
(cigarette lighter).
2.2.1 First Charge
The equipment comes with the battery half charged. Depending on the time
elapsed from first charge and environmental conditions may have lost some of
the charge. You should check the battery level. It is advisable a first full charge.
2.2.2 Charging the Battery
Connect the DC power adapter to the equipment through the power connector
on the side panel (see figure).
Figure 3.
Then connect the DC power adapter to the mains via the mains cord. Ensure that
your mains voltage is compatible with the adapter voltage.
For a fast charging is necessary to switch off the equipment.
If the equipment is ON, the battery charge will be slower, depending on the type
of work you are doing. When connecting the equipment to the mains the mains
connected symbol appears inside the battery icon.
The CHARGER led indicator shows the battery status:
Yellow: Battery charging.
Green: Battery full charge.
Blinking: Battery not detected.
Off: Battery is not charging.
March 2021 4 Chapter 2: SETTING UP
When switching on the equipment, the battery voltage is checked. If the tension
is too weak to start, the LED EXT and DRAIN flashes and the equipment does
not start up. In this case please charge the battery immediately.
2.2.3 Charge / Discharge Times
Average charging time with the equipment off (fast charge):
3 hours to achieve an 80% charge.
5 hours to achieve a 100% charge.
With the equipment on (slow charge):
5 hours to achieve an 80% charge.
8 hours to achieve a 100% charge.
Average discharge time (with external supply disabled)
With the battery full charge the average battery time is 5:30 hours.
*
:
With the battery at 80% charge the average battery time is 4 h.
2.2.4 Energy Saving
These options are available in the Preferences menu, pressing the key for
1 s.
Power Off: It allows the user to select the time to power off, which is the
time after which the equipment shuts down automatically unless pressing
any key.
TFT Screen: User can select a time after which the TFT screen turns off,
but the equipment is still running normally. The equipment can measure
(for example, making a datalogger or channel exploration) and the battery
will last longer, about 10% more. The screen turns on by pressing any
key. Time options are: off, 1, 5, 10 or 30 minutes.
2.2.5 Smart Control Battery
The built-in battery of the equipment is of the "smart" type, which means that
reports its state of charge. This information is displayed inside the battery icon
*. For the RANGER Neo 4 the average discharge time is 3 hours under this circumstances: DVB- T2,
4k, brightness TFT 80%, TV mode decoding
Chapter 2: SETTING UP 5 March 2021
in the form of the average time available. In this way the user can know at any
time the remaining battery level.
The remaining time charge that appears is calculated according to the work that
has been doing. If you activate the external supply of the equipment, the
average time would be reduced according to the increase in consumption that
occurs.
2.2.6 Usage Tips
The battery is losing storage capacity as you go through its life. Contact your
PROMAX distributor when necessary to replace the battery.
To extend battery life the user should follow these tips:
In case of providing a long inactivity period of the equipment it is
advisable to make every 3 months a charge / discharge cycle and a
subsequent partial charge (40% aprox.).
It is advisable to keep it in a cool place and away from heat.
You should avoid keeping the battery for a long period of time at full load
or fully discharged.
There is not necessary to wait to fully discharge before a charge because
these batteries have no memory effect.
March 2021 6 Chapter 2: SETTING UP
2.3 Equipment Details
2.3.1 RANGER
Neo
2
Figure 4. Front View.
Chapter 2: SETTING UP 7 March 2021
Figure 5. Side View.
March 2021 8 Chapter 2: SETTING UP
Figure 6. Top View*.
Chapter 2: SETTING UP 9 March 2021
2.3.2 RANGER
Neo
3
Figure 7. Front View.
*. For Optical Option refer to annex.
March 2021 10 Chapter 2: SETTING UP
Figure 8. Side View.
Chapter 2: SETTING UP 11 March 2021
Figure 9. Top View*.
March 2021 12 Chapter 2: SETTING UP
2.3.3 RANGER
Neo
4
Figure 10. Front View.
*. For Optical Option refer to annex.
Chapter 2: SETTING UP 13 March 2021
Figure 11. Side View.
March 2021 14 Chapter 2: SETTING UP
Figure 12. Top View*.
Chapter 2: SETTING UP 15 March 2021
2.4 Switching On/Off
►Switching On:
1 Press for a while (approximately one second) the ON/OFF button placed on
the side of the equipment.
2 The boot screen appears and also a progress bar that indicates the system
is loading. At the top left corner it shows the equipment model and release.
3 After the system loads, it shows the last status used (mode and screen).
►Switching Off by hardware:
1 Press the ON/OFF button placed on the side of the equipment:
Short Press (<1 s): A menu on screen allows the user to select between
power off or reboot.
Long Press (>2 s): The equipment turns off directly.
►Switching Off by software:
1 Press the Tools key .
2 Select the “Power Off” option.
►Switching Off by software (Energy save):
1 Press the Preferences key (press 1 s).
2 Select the “Appearance” tab.
3 The option "Off" allows the user to enable the automatic shutdown option.
Select a waiting time (time without pressing any key and the meter not
working) after which the equipment turns off automatically.
NOTE: The shutdown process lasts few seconds, during which it shows the boot
screen picture and also a bar showing the shutdown progress.
The equipment keeps its last status (mode and screen) which is
recovered when power on.
*. For Optical Option refer to annex.
March 2021 16 Chapter 2: SETTING UP
2.5 Reset
How to RESET: Hold down the key for 6 seconds and release.
When to RESET:
When it crashes and does not respond to any key. Hold down the
ON/OFF button for 10 seconds and if the meter does not turn off then
RESET.
When it does not switch on. If it does not start after trying turning on
by the normal procedure (by pressing the ON/OFF button with the meter
connected to the mains) then RESET.
When it does not finish the boot process. Hold down the ON/OFF
button for 10 seconds and if the meter does not turn off then RESET.
2.6 Screen Icons and Dialog Boxes
On the screen are some icons that provide useful information to the user about
the current status of the instrument.
Figure 13.
Chapter 2: SETTING UP 17 March 2021
2.7 Menu Tree
► RF Menu
Figure 14. RF Tuning
March 2021 18 Chapter 2: SETTING UP
Figure 15. Tools Menu
Chapter 2: SETTING UP 19 March 2021
Loading...