USER’S MANUAL
99 Washington Street
Melrose, MA 02176
800.517.8431
TestEquipmentDepot.com
OPTICAL TO RF ADAPTOR
CV-100
- 0 MI1791 -
SAFETY NOTES
Read the instruction manual before using the equipment, mainly
"SAFETY RULES" paragraph.
The symbol
MANUAL". In this manual may also appear as a Caution or
Warning symbol.
Warning and Caution statements may appear in this manual to
avoid injury hazard or damage to this product or other property.
on the equipment means "SEE USER’S
TABLE OF CONTENTS
E
RAL INFORMATION ................................................. 1
1 GEN
1.1 Description ...................................................................1
1.2 Specifications ............................................................... 1
2 SAFETY RULES..................................................................3
2.1 Descriptive Examples of Over-Voltage Categories
¡Error! Marcador no definido.
3 OPERATING INSTRUCTION..............................................5
3.1 Description of the controls and elements .................... 5
3.2 Connecting with the FIELD METER. ........................... 6
3.3 Practical applications. ..................................................7
4 MAINTENANCE ..................................................................9
4.1 Cleaning recommendations .........................................9
English
11/10 CV-100
OPTICAL TO RF ADAPTOR
CV-100
1 GENERAL INFORMATION
1.1 Description
The CV-100 is an optical to RF signal adaptor that allows
TV Analysers and Satellite with optical links. This adaptor
covers the full RF band for FI satellite, terrestrial and CATV. It
includes a DC power output to provide power to the optical
LNB of the satellite antenna. It also has a 20 dB RF attenuator
selectable. It is an ideal complement to the installer that
already has a field meter, as the TV EXPLORER, allowing use
in fibre optic installations without needing other instruments
1.2 Specifications
OPTICAL INPUT:
Wavelength range: 1100 to 1600 nm.
Input power range: from +7 dBm to - 30 dBm.
Optical Return Loss: >40 dB.
Optical connector: FC-PC (standard, others on demand).
Fiber Core/Cladding: 9 /125 µm.
RF Output / Input DC:
Bandwidth: from 5 to 2500 MHz.
Max. output signal: 120 dBµV.
RF connector: BNC.
CTB, CSO: ≤ 65 dBc.
English
11/10 - 1 - CV-100
Attenuator 20 dB Selectable.
Alimentation
Voltage 12 to 14 V DC.
Max Power 580 mA.
Max. Voltage 14 V (Overvoltage protection).
DC OUTPUT: F connector for optical LNB supply.
Environmental operating conditions
Altitude: up to 2000 m.
Temperature range: om 5 °C to 40 °C.
Maximum relative
humidity: 80% (up to 31° C), decreasing
Mechanical features
Dimensions 77 mm W x 85 mm H x 28 mm D.
Weight 150 g.
By passed from RF output /DC Input
(500 mA max).
lineally up to 50% at 40° C.
11/10 - 2 - CV-100
2 SAFETY RULES
* The safety could not be assured if the instructions for
use are not closely followed.
* Use this equipment only on systems or devices with the
measurement connected to negative ground potential or
isolated from the network.
* Observe all specified ratings both of supply and
measurement.
* Use this instrument under the specified environmental
conditions.
* Remenber that voltages higher than 70 V DC or 33 V AC
rms are dangerous.
* The user is not authorised to manipulate inside the
instrument:
Any change on the equipment should be carried out by
qualified personnel.
* Use for the signal inputs / outputs, specially when working
with high levels, appropriate low radiation cables.
* Follow the cleaning instructions described in the
Maintenance Paragraph.
English
11/10 - 3 - CV-100
* Symbols related with safety:
11/10 - 4 - CV-100
3 OPERATING INSTRUCTION
3.1 Description of the controls and elements
Figure 1.- Front view
1.- RF Output / Power Input.
2.- LNB Power Output.
3.- ON / OFF LED Instrument Indicator.
4.- Optical Fibre Input
5.- ON / OFF Switch
HIGH: No Attenuator (ATT=0 dB).
LOW: Attenuator (ATT=20 dB).
OFF: Instrument stopped.
11/10 - 5 - CV-100
English
3.2 Connecting with the FIELD METER.
11/10 - 6 - CV-100
Figure 2.-
3.3 Practical applications.
a) Connection between SATELLITE signal over FIBRE
OPTIC to FIELD METER through CV-100 adaptor.
Figure 3.-
b) Connection between DIGITAL TERRESTRIAL signal
over FIBRE OPTIC to FIELD METER through CV-100
adaptor.
Figure 4.-
11/10 - 7 - CV-100
English
11/10 - 8 - CV-100
4 MAINTENANCE
The method of maintenance to be
consists of cleaning the cover. All other operations should be
carried out by authorised agents or by personnel qualified in
the service of instruments.
carried out by the user
4.1 Cleaning recommendations
CAUTION
Do not use scented hydrocarbons or chlorides solvents.
Such products may attack the materials used in the
construction of the cover.
The cov
of detergent and water applied with a soft cloth.
er should be cleaned by means of a light solution
Dry thoroughly before using the system again.
4.2 Not replaceable fuses by user.
F001:
11/10 - 9 - CV-100
FUS 2.5 A T 125 V
English
Loading...