CL-3684
USER' S MANUAL
3
Congratulations
Safety Precautions
Prior To Use
...on purchasing our high quality product. Please read the
manual carefully before installing your system and follow
all of the directions to ensure proper installation.
To reduce the risk of electrical shock and injury, please follow
these basic safety precautions before using the phone.
1. Carefully read and observe the instructions in this manual.
2. Follow all warnings marked on the unit.
3.Unplug this product from the wall outlet before cleaning, then
use a damp cloth to wipe. Do not use liquid or aerosol
cleaners.
4.Do not place objects on the line cord that may cause
damage.
5.Do not place the Outdoor phone near the metal.
6.Pay attention to the polarity of the batteries, insert the
rechargeable batteries in accordance with polarity symbols
(this instruction is found in the installing batteries section.)
7.Keep the phone out of the reach of children.
8.Use the phone only in the described manner.
9.Stop using the phone if it becomes damaged.
1
Supports up to 2 outdoor units
2.4'' (320x240) QVGA LCD display
Video resolution: 320 x 240, with 20pics per second
Wide angle lens and LED for night vision
Long standby doorbell (battery up to 2 years or connect with
DC+9 12V )
Water-proof outdoor station Ip55
Microphone and speakerphone
Brightness and talk volume are adjustable
Crystal sound quality
Transmitting distance : with up to 200m range out of doors
Transmitting distance : with up to 50m range indoors
Remote door opening ( Optional)
DIY installation to save high labor cost
～
Introduction
2
Once you have unpacked your door phone, make sure that all
the parts shown below are available. If any pieces are missing or
broken, please promptly call your dealer.
Adapter
(7.5V, 300mA)
3 AAA Ni-MH
batteries
Outdoor phone
rear cover
Rain Cover
User' s Manual
CL-3684
USER' S MANUAL
Unpacking
Battery compartment
without batteries（）
Screwdriver
Four Screws
3
Indoor phone
(Handset)
Indoor phone
(Charger)
Outdoor phone
17
Layout
Camera
LED light
Microphone
Speaker
Call button
(with name tag
on it)
Sensor light
Outdoor Panel
4
? Design and specifications are subject to change without notice.
Receiver
Receiving Frequency Range
2.400GHz 2.4835GHz～
Monitor
2.4''Color LCD
Date Rate
2.0Mbps
Receiving Sensitivity
-90dBm
Demodulation Type
GFSK/FSK
Resolution
320 240(RGB)
Viewing Angle
H:120 V:100
Transmitting Power
19dBm(TYP)
Power Requirement
3 Ni-MH1.2V,800mAh
Power Consumption
450mA Max
Operating Temperature
-10 40 (14 104 )℃～ ℃ ℉～ ℉
Operating Humidity
0% 85%RH～
Weight
110g
Size(WXHXD)
Handset: 165 50 26mm
Charger: 79 77 42mm
No. of cameras supported
Max.4
Item
Detail
Technical Specification
5
Indoor Phone
Indoor Charger
Charge pins
Left Soft key
Right Soft key
(Manual Snap)
LCD display
Navigation
key
Power/
End key
Accept key
Unlock key
Microphone
Antenna Locking Switch
Speaker
Battery
compartment
cover
Charging pins
Technical Specification
Camera
Transmit Frequency Range
2.400GHz 2.4835GHz～
Date Rate
2.0Mbps
Transmitting Power
19dBm (TYP)
Modulation Type
GFSK/FSK
Transmitting Distance
Outdoor:200m, Indoor:50m
Image Sensor Type
1/4 Color CMOS Image Sensor″
Effective Pixels
H:320 V:240
Image Processing
Motion JPEG
Image Resolution / Frame Rate
H:320 V :240 / 25fps
White Balance
Auto
Lens
4.9mm / F2.8
Viewing Angle (Diagonal)
50
Minimum Illumination
1 LUX (without LED illumination)
LED
6 LED s
Power Requirement
+9 12V DC 5% /2 LR14(C) ,1.5V batteries～
Power Consumption
500mA Max (cells),
400mA Max (+12V DC)
Operating Temperature
-20 40 (14 104 )℃～ ℃ ℉～ ℉
Operating Humidity
0% 85%RH～
Weight
166g
Size(WXHXD)
185 68 50mm
Item
Detail
16
Antenna
6
15
The rechargeable Ni-MH batteries (AAA size,
come with your phone. Install the batteries before use.
1.2V, 800mAh)
1.
Indoor phone
2.
3.
To replace the battery cover, slide the
cover up until it snaps in place.
Reversing the orientation may damage the handset.
The batteries need to be replaced if they do not
recover their full storage capacities after recharging.
When replacing the batteries, always use good
quality Ni-MH re-chargeable batteries. Never use
other batteries or conventional alkaline batteries.
Notes:
Installing Batteries
Insert new batteries as indicated,
matching correct polarity(+,-).
Chapter 7:Default Setting
Note:
If you reset the handset to the factory default, all of the
settings will return to the factory default.
The pictures will store in this menu, you can save or delete them.
1.Press beneath to display the main menu items.
2.Press or to choose , then press
beneath .
3.Press or to browse pictures.
4.If you want to delete the current pictures, use or
to choose , press the beneath .
The display will show , Press beneath to
confirm. After a beep the LCD shows the next picture.
5.Press beneath to return to the previous menu.
Menu
Up Down
Select
Left Right
Left
Right Delete Del
Delete? Yes
Back
Chapter 6: Snap Show
This function allows you to reset the handset settings to the
factory default.
1.Press beneath to display the main menu items.
2.Press or to choose , then press
beneath .
3.Press or to choose or to enable
or disable the function.
4.Press beneath to save the settings and return to
the previous menu.
After resetting, the handset will return to standby mode.
Menu
Up Down
Select
Up Down Yes No
Select
Result:
、
Menu Description (continued)
Outdoor phone
1.Install two C size batteries (not supplied) into the battery
2.Drill four screws to fix the battery compartment up.
3.Slide the battery compartment into the outdoor phone f
compartment, replace the cover.
and finish the installation.
rom
right to left
7
! Important Note YOU SHOULD
FULLY CHARGE THE HANDSET
15
: Before initial operation,
for
about hours.
To charge the handset, you should place it on the charger.
Charging Handset
Chapte r 4: Key Tone
Every time you press a key, your handset acknowledges it with a
key tone. You can disable the key tones for a silent use. In certain
error conditions, a warning tone will sound when an incorrect key
is pressed.
1.Press beneath to display the main menu items.
2.Press or to choose ,then press
beneath .
3.Press or to choose or to enable or
disable the function.
4.Press beneath to save the settings and return to the
previous menu.
Menu
Up Down
Select
Up Down On Off
Select
Chapter 5: Snap Setting
This function allows you to set auto snap or not. If the
is selected , the handset will take pictures automatically during
the conversation or the monitoring.
1.Press beneath to display the main menu items.
2.Press Up or Down to choose ,then press
beneath .
3.Press or to choose or to enable or
disable the function.
4.Press beneath to save the settings and return to the
previous menu.
Auto Snap
On
Menu
Select
Up Down On Off
Select
Menu Description (continued)
14
Note:
Also, you can use key to take photos manually.Snap
Chapter 3:Date&Time
1.Press beneath to display the main menu items.
2.Press or to choose , then press
beneath .
3.If you want to set the time, you can press or
to choose the or the , and press the
or to adjust.
4.If you want to select the date, you can press or
to choose the or the or the ,
and press the or to adjust.
5.Press beneath to return to the previous menu.
Menu
Up Down
Select
Left Right
Hour Minute Up
Down
Left
Right Year Month Date
Up Down
Back
Menu Description (continued)
Notes:
The time format is 24-hour format and the date format is
YY-MM-DD.
The must be set beforehand to ensure that the
time displayed on the monitoring pictures are correct.
The setting order is
Date&Time
Date&Time Hour ---
-.
＞＞＞
＞
Minute Year
Month Date
Installation Instruction
Indoor phone
Connect the modular end of the AC
power adapter to the power jack of
the charger, then plug the AC adapter
into a standard AC wall outlet.
Outdoor phone
1.Choose a proper location for the outdoor phone. Be sure to
consider the average height of visitors.
2.Align the rain cover and screws with the holes in the wall.
3.Install the outdoor phone into the rain cover. Please refer to
the picture 3 below
4.Drill a screw to fix.and finish the installation.
ToAC wall outlet
Align
1
2
3
4
8
13
Away from electrical
appliances, such as a TV,
personal computer or
another cordless phone.
In a HIGH and CENTRAL
location with no
obstructions such as walls
microwave oven and WIFI.
.
，
Slide the
antenna locking
switch to
unlocking
position the
receiver
antenna will pop
up to receive
better signal.
，
Notes:
Diagram
Note:
Both the batteries and the power supply are available, but
not to use them at the same. To support some special
functions, like monitoring, backlight, on the call button and
unlocking, please connect the power supply.
Outdoor Phone
Lock
+9 12V～
The maximum output
cur rent ca n be 1A.
DC Power
Lock
+9 12V
～
+9 12V～
For normal
close lock
9
12
Chapter1: Volume
Chapter2: Light Level
This function allows you to adjust the volume (9 levels are
adjustable).
1. Press beneath to display the main menu items.
4.Press beneath to save the settings and return to the
previous menu.
2. Press or to choose then press
beneath .
3. Press or to select the volume that you like.
Each time you press or , the handset
sounds with the selected volume.
Menu
Back
Up Down
Select
Left Right
Left Right
，
This function allows you to adjust the volume (9 levels are
adjustable).
1. Press beneath to display the main menu items.
2. Press or to choose then press
beneath .
3. Press or to select the volume that you
like. Each time you press or , the handset
sounds with the selected volume.
4.Press beneath to save the settings and return to the
previous menu.
Menu
Up Down
Select
Left Right
Left Right
Back
，
Menu Description
DC Power
+9 12V～
For normal
open lock
The maximum output
current can be 1A.
Outdoor Phone
The first connection mode as shown below:
The second connection mode:as shown
below
11
To turn the indoor monitor on, press .
To turn the indoor monitor off, press .
Turning On / Off
First, press the button of the , then hold the
key on the back of the Outdoor phone until the LED
light blinks. Second, press on the Indoor
phone, then select the menu. Once a prompt tone is
heard, the has been registered to the
successfully.
If the registration was unsuccessful, turn off the and
remove the batteries from the before you hold the
key. Then turn on the , re-install the
batteries and try again.
Call
Register
Register
Register
Outdoor phone
beneath
Outdoor phone Indoor
phone
Indoor phone
Outdoor phone
Outdoor phone
Menu
Indoor phone again
’s
Register
Call button
(with name tag
on it)
Register
Button
10
In the evening, when someone presses the Call button on the
outdoor phone, all the LED lights will light on.
Light Sensor
Unlocking
During a conversation, to unlock the door, press the
Outdoor phone.
on
Operations
Calling Indoor phone
In standby mode, press the Call button on the outdoor phone.
The corresponding indoor phone rings, and the image of the
visitor appears on the LCD of the indoor phone.
1. If the master does not want to answer, press to cancel
the ringer and the video. Then the outdoor phone will ring for
20 seconds before it returns to the standby mode.
phone2. After the master press , the outdoor will stop
ringing. Then the conversation starts.
3. Press to end the conversation.
Notes:
The conversation can be up to 2 minutes. After 2 minutes,
the line will be disconnected automatically.
The monitor process can be up to 5 minutes. After 5
minutes, the indoor phone will quit monitor mode
automatically.
Operations
Loading...