PROLiNK PHS100 Installation Guide

Technical Notice

Ver1.0 Friday , 07th May 2009

Subject : PROLiNK PHS100 3.5G HSDPA Modem Windows 7 Release Candidate (RC)
Installation Guide

Dear Customers ,

For the pre-release version of Windows 7 (RC), please find the installation guide for our PHS100
HSDPA Modem.

(1) Plug in the PHS100 modem to your PC USB port and install the modem driver via QsSetup.exe.

If the installation is successful, you will see “PROLiNK PHS100 USB HSDPA Modem” under Modems in
the Device Manager.

If you try to connect in the PC Manager, you will get the error message “Failed to connect Internet!”

This is normal as the PC Manager utility has still not been finalize to work in Windows 7. In this case,
please do not use the PC Manager to do the connection. Please follow the following steps to manually
create a dial-up connection in Windows 7.

1

(2) Open Network & Sharing Center > Set up a new connection or network > Set up a dial-up
connection > Next

(3) Type in your ISP Dial-up phone number: e.g. *98# > Username and Password: Leave blank >
Give a connection name to it e.g. PHS100 Dial-up Connection > Connect

If you do not know your ISP Dial-up phone number, please follow Step 4 to find out.

2