PROLiNK PHA-5068 User Manual

Security and Access Control for Access Point Mode

• Support static WLAN WEP up to 152 bits encryption

• MAC Address Control

• WPA with Radius Server for (EAP-TLS, EAP-TTLS) PEAP (EAP-GTC)(In Access Point mode)

• WPA-PSK (AES and TKIP)

• Wireless isolation

• Allow clients to assoc with specified APs

Key Features

Up to 25km LOS range with external antenna* Professional Vehicle Wireless Station Outdoor waterproof IP67 Casing Up to 108 Mbps (Turbo Mode) MAC filtering & Remote AP Association Control WPA, WPA-PSK, WEP and AES security Bandwidth control with QoS VOIP and video. Web and SNMP management.

Wireless Features

• IEEE 802.11a/h compliant radio, up to 54Mbps

• Support DFS and TPC

• RF Power Control between 100% to 12.5% of max power

• Support seamless roaming within the same subnet between Access Point (repeater and client mode)

• Up to 250 association and 50 con-current users

• QoS with bandwidth control

• Support dual external antenna diversity

Network (Internet and Intranet)

• Protocol Filtering

Outdoor AP, Repeater, Point to Multi-Points

Wireless Bridge & Professional Vehicle Transceiver

PHA-5068

RF Specification

Frequency 4.900 ~ 5.875 GHz

Wireless Data Rate 54, 48, 36, 24, 18, 12, 9, 6 Mbps

Channels Country dependent

Transmit Power Up to 27dBm

Modulation OFDM, BPSK, QPSK, 16QAM,

Up to 108Mbps for Turbo mode

64QAM

Management

• Web-based management

• SNMP V1 and V2C management

• IP address discovery software (Viper Quick Start)

•

Firmware upgradeable through web-server and telnet

Hardware

• Antenna connectors: Two 50-Ohm N-type (Female)

• Chassis Type: IP67 Rating with Bracket (wall/pole mounting)

• Ethernet Port: 10/100 Base-T (RJ-45) with auto MDIX

Environment

• Operating Ambient Temperature: 0ºC to 60ºC

• Relative Humidity when operational : 20~90% (non-condensing)

•

Storage Ambient Temperature: -35ºC to +70ºC

• Relative Humidity during storage: 95% Max (non-condensing)

Standard Package

The standard package for PHA-5068 comes with:

1. PHA-5068

2. 48VDC combiner adaptor (PoE)

3. Screws, nuts and washers (for bracket)

4. Mounting bracket (for walls or pole)

5. N type to SMA type adaptor x2

6. 2dBi antenna x2

7. 3m cable with IP67 RJ45 connector

Receiver Sensitivity -90dBm for 6Mbps

-89dBm for 9Mbps

-88dBm for 12Mbps

-87dBm for 18Mbps

-84dBm for 24Mbps

-81dBm for 36Mbps

-74dBm for 48Mbps

-71dBm for 54Mbps

Built-in Antenna Gain Two 50 Ohms N-Type (F)

Power Specification

• Power adapter: 18~48V DC through RJ45

• Power Consumption: Typical 15 Watts, 20 Watts Max

Specification are subject to changes without prior notice due to engineering improvement. Wireless range and performance may vary with environment. Al l brands and product names are trademarks or registered trademarks of their respective holders.

*With 24dBi Grid Parabolic Antenna on each station. Distance may vary with envi ronment.