PROLiNK PHA-1001G User Manual

802.11g Wireless LAN

Access Point and Ethernet Bridge

Key Features

Can function as Access Point or Wireless Ethernet

Bridge

Compact size Accept 6~15 V D.C. directly suitable for vehicle

mounting.

Can be incorporated into different product e.g. weighing

scale, vending machine,surveillance camera and etc.

Wireless Isolation between wire less clients MAC address Access Control

Wireless Features

•IEEE 802.11g compliant radio, up to 54 Mbps

•RF Power Control. The transmit power can be adjusted by software control between 100% to 12.5% of maximum radio power

•Remote Access Point Association Control

•Support seamless roaming within the same subnet between Access Point (In repeater and client mode)!

Network (Internet and Intranet)!

•Protocol filtering

Security and Access Control for Access Point Mode

•Support static WLAN WEP up to 152 bits encryption

•MAC Address Control

•WPA with Radius Server for EAP-TLS, EAP-TTLS and EAPPEAP (In Access Point mode)!

•WPA-PSK (AES and TKIP) (In Access Point mode)!

•Wireless to wireless user isolation

Management

•Web-based management

•IP address discovery software (Viper Quick Start)!

•Firmware upgradeable through web-server and telnet

RF Specification

• Wireless Data Rate

• Channels

• Transmitter Output Power

• Nominal Antenna Port Impedance

• Media Access Protocol

• Modulation Technique

2.4 ~ 2.4835 GHz•Frequency Range

54, 48, 36, 24, 18, 12, 11, 9, 6,

5.5, 2, 1 Mbps 108Mbps for Turbo mode

11 channels (USA/Canada), 13 Channels (Singapore, Europe except France), 14 Channels (Japan)!

17dBm ± 2dBm

50 Ω (for ext ernal antenna connector, if applicable)

CSMA/CA with ACK

OFDM, CCK, DQPSK, DBPSK

Hardware

•Antenna connector: 50-Ohm Reverse SMA Female antenna connector. (For external antenna connection)!

•Chassis Type: Desktop mounting

•Ethernet Port: One 10/100 Base-T (RJ-45 connector) with auto MDIX.

Standard Package

The standard package for AP-1001g comes with the following

• AP-1001 g

•2 dBi Antenna

• 9V 1000mA Power Adaptor

Power Specification

•Power adapter: 5~15 V DC

•Power Consumption: Typical 5.0 Watts, 5.5 Watts Max

Environment

•Operating Temperature: 0ºC to 45ºC ambient

temperature

•Relative Humidity When Operational: 20~90% (noncondensing)!

•Storage Temperature: -20ºC to +75ºC ambient temperature

•Relative Humidity during storage: 95% Max (noncondensing)!

Specification are subject to changes without prior notice due to engineering improvement. Wi reless range and performance may vary with environment. All brands and product names are trademarks or registered trademar ks of thei r respective hol ders.