Solar
PROLiNK DC UPS
PDC Series - DC UPS
PROLiNK DC Series is a compact design of DC UPS system which converts AC power to DC power with dynamic voltage
regulator; the UPS can ensure stable DC power to connected load as utility. This UPS system is an economic ideal for
communication devices such as switch, hub, router and modem.The built-in DC start function enables the UPS to be
started up without supply of AC power. To consider that facilitate and can be used under various circumstances,
PROLiNK DC series has design with a very compact size for locate and storage.
• Dual DC Outputs
• Microprocessor controlled guarantees high reliability
• Compact size for standing and mounting flexibility
• Supports solar powered devices and communication applications
• Auto restart while AC is recovering
• Off-mode charging
PDC50
• Overload protection and short circuit protection
Full Specifications
MODELS
Capacity
INPUT
Nominal Voltage
Voltage Range
Frenquency
OUTPUT
Output Voltage Regulation
Transfer Time
EFFICIENCY
AC Mode
Battery Mode
BATTERY
Charging Voltage
Charging Current
Typical Recharge Time
INDICATION
AC Mode
Battery Mode
Low Battery
Fault
PROTECTION
Full Protection Short Circuit and Overload Protection
PHYSICAL
Dimension (mm) D x W × H @ Vertically Stand
Net Weight (kgs)
ENVIRONMENT
Humidity
Temperature
>75% at Nominal Voltage (Battery Fully Charged)
2.8A or 2.3A at Nominal Voltage without Load
4 ~ 6 hours recover to 90% capacity
PDC50
50W
220VAC
160 - 280VAC
50 or 60Hz
12VDCNominal Voltage
10V ~ 13.7V
0ms
>95% at Full Load
12V9AH x 1Battery Type
13.7V ±0.25V
Green Lighting
Yellow Lighting
Yellow Flashing
Red Lighting
228 x 82.5 x 207
3
0 ~ 90%
0°C ~ 40°C
All specifications, designs and contents are subjected to changes without prior notice
35
Solar
PROLiNK Solar System
PCC Series
PCC Series is a combination of MPPT technology and DSP controller system, it will convert best voltage to charge battery
based on varied temperature. Compared to traditional solar charger controller, it allows your solar panels to operate at their
optimum power output voltage, providing higher efficiency up to 97.7% with lower power loss.
PCC Series with inverter, solar panel, and external battery packs; it will become a standalone solar power system to generate
green power for your home application. PCC Series will convert solar power to charge external batteries, and then provide
power to home appliances via inverter. It’s compatible to 4 different battery types, sealed lead acid, vented, gel and NiCd.
• Intelligent Maximum Power Point Tracking technology
• Built-in DSP controller with high performance
• Automatic battery voltage detection
• Three-stage charging optimizes battery performance
• Auto load-detection
• Multifunction LCD displays detailed information
• Reverse polarity protection of solar panel and battery
• Overcharge and overload protection
#1
PCC600 PCC3000PCC300
Full Specifications
• IP 43 protection for outdoor and harsh environment
• IP 21 protection
#2
• Suitable for battery types of sealed lead acid, vented Gel, and NiCd
• Standard RJ45 port or optional RS-485 communication port
for remote monitoring
MODELS
Capacity
INPUT
MPPT Range @ Operating Voltage
Maximum PV Array Open Circuit Voltage
Maximum Current
OUTPUT
Nominal Battery Voltage
Connected Battery Type
Maximum Charging Current
Ripple Voltage
Maximum Efficiency
Stanby Power Consumption
Charging Method
PROTECTIONS
Overcharge Protection
Polarity Reversal Protection @ Solar Cell & Battery
INDICATION
LCD Panel
LED Display
PHYSICAL
Dimension (mm) D x W × H
Net Weight (kgs)
Connector
Type of Mechanical Protection
ENVIRONMENT
Humidity
Operating Temperature
Storage Temperature
Altitude
PCC300
300W
18A 45A
Sealed Lead Acid, Vented, Gel, MiCd Battery
25A 60A
97.8%
1W 2W
Three Stages: Bulk, Absorption & Floating
>110%: Audiable Alarm YesOverload Protection
LCD Panel indicating Solar Power, Output Power, Battery Voltage, Charging Current, and Fault Conditions
Three indiators: Solar, Charging & Load Status
Input or Output Terminal Block
IP43 IP21
0~90% Relative Humidity (non-condensing)
PCC600
600W
30 ~ 66V @ 24V 60 ~ 132VDC15 ~ 33V @ 12V
75V 150VDC50V
24V 48V12V
<±1V
Yes
Yes
Three indiators: Solar, Battery &
220 x 170 x 57.5
1.85
-20°C to 55°C
-40°C to 75°C
0 ~ 3000m
PCC3000
3000W
98%
Wiring Fault
180 x 210 x 80135 x 170 x 57.5
1.280.92
#1 Only applicable to Model with 50~300W. #2 Only applicable to Model with 3000W.
All specifications, designs and contents are subjected to changes without prior notice.
36
Solar
PROLiNK Solar System
PSI Hybrid Series
PSI Hybride Series is a hybrid inverter which combines solar system, AC utility, and battery power source to supply continuous
power. It is suitable for the remote areas where the cost of utility is too high or emergency usage when utility is not stable. The
system will supply the load and feed power back to the utility grid when the PV energy output is available. When the PV energy
output is not sufficient for connected loads, the inverter will convert to the utility grid at the same time.
• Daytime or sunny day, works as an On Grid Inverter Night
time or rainy day, works as an Off Grid Inverter
• Pure sine wave output
• Multiple operations: Grid tie, Off grid, and grid-tie with
backup
• Built-in MPPT solar charger
• LCD display panel for comprehensive information
• Multiple communication
HYBRID 3K
• Green substitution for generators
Full Specifications
MODELS
Capacity
INPUT (DC)
Maximum DC Voltage
MPP Voltage Range
DC Nominal Voltage
Maximum Input Current
GRID/ UTILITY INPUT (AC)
208/ 220/ 230/ 240VAC / 175 ~ 280 VACNominal AC Voltage/ Range
Maximum Input Current
GRID OUTPUT (AC)
Nominal AC Voltage/ Range
Nominal Output Current
Power Factor
BATTERY MODE OUTPUT (AC)
Output Voltage
Output Frequency
Output Waveform
Efficiency (DC to AC)
BATTERY & CHARGE
Nominal DC Voltage
Maximum Charging Current
PHYSICAL
Dimension (mm) D x W × H 420 x 415 x 170
Net Weight (kgs) 15.5
INTERFACE
Communication Port
Intelligent Slot
Wireless Connection
ENVIRONMENT
Humidity
Operating Temperature
Altitude
0 ~ 1000m (Power derating 1% every 100m when altitude is over 1000m)
208/ 220/ 230/ 240VAC / 184 ~ 265VAC
Optional SNMP Card and Modbus Card available
Optional Zigbee Card and Wireless device available
0~90% Relative Humidity (non-condensing)
HYBRID 3K
3000W
500VDC
250VDC ~ 450VDC
360VDC
13A
20A
47.5 ~ 50.2HzAC Grid Frequency Range
13A
>0.99
208/220/230/240 VAC
50Hz
Pure Sinewave
92%
48VDC
25A
RS-485/ RS-232
-25°C to 60°C
All specifications, designs and contents are subjected to changes without prior notice.
37
Solar
PROLiNK Solar System
PSI On-Grid Series
PSI On-Grid Series can operate at their optimum power output voltage even under variety of weather conditions. Amnetz PV
inverters also allow a wide input voltage range to generate maximum 96% efficiency. Besides, it also offers user-friendly
design and modulated electric design. Bundled with monitoring software, Amnetz PV inverters can monitor and calculate the
accurate saving energy.
• 1.5KW/2KW/3KW/5KW & 3-phase 10KW on-grid PV inverter
• Advanced DSP control technology delivers accurate data
• Smart MPPTs to enhance overall efficiency
• Modulized design for easy maintenance
• Industrial-grade components used for robust operation
• Data log up to 15 years
AMNETZ 1500
AMNETZ 2000
AMNETZ 3000
• IP 65 protection for outdoor and harsh environment
• Comprehensive LCD monitor for easy-reading
• Free monitoring software
Full Specifications
MODELS
Capacity
Phase
INPUT (DC)
Maximum DC Power
Maximum DC Voltage
MPP Voltage Range
Nominal DC Voltage
Start-up Voltage/ Initial Feeding Voltage
Maximum Input Current/ Per String
OUTPUT (AC)
Nominal AC Voltage
AC Voltage Range
AC Grid Frequency
Nominal Output Current
Power Factor
EFFICIENCY
Maximum Efficiency
PROTECTION
DC Reverse-Polarity Protection
Ground Fault Monitoring
Grid Monitoring
AC Short Circuit Protection
PHYSICAL
Dimension (mm) D x W × H
Net Weight (kgs)
INTERFACE
Intelligent Slot
ENVIRONMENT
Humidity
Operating Temperature
Altitude 0 ~ 1000m (Power derating 1% every 100m when altitude is over 1000m)
COMPLIANCE
AMNETZ 1500
1500W
1650W 2200W 3200W 5300W 11000W
450VDC 500VDC 500VDC 900VDC
150 ~ 400VDC 200 ~ 450VDC 320 ~ 800VDC
230VAC 230VAC 230VAC 3/ N/ PE, 230/ 400VAC
6.6A 8.7A 21.7A 14.5A
CE, VDE 0126-1-1, IEC62109, ENEL Guide 2009, RD 1663, G83/ 1-1, AS3100/ AS4777Standard
AMNETZ 2000
2000W
1 Phase-In 1 Phase-Out
11A 10A 16A 17A
96.0% 96.5% 98.0%
USB Card/ Optional: SNMP, RS-232, AS-400 and GPRS Cards
0 ~ 100% Relative Humidity (Non-condesing)
AMNETZ 3000
3000W
500VDC
230VAC
-20% ~ +15%
50Hz / 60Hz
13A
>0.99
Yes
Yes
Yes
Yes
160 x 270 x 450 182 x 308 x 515 171.2 x 503.5 x 653.3136.5 x 268.5 x 410
AMNETZ 5000
5000W
150 ~ 500VDC
370VDC 600VDC360VDC
116/ 150VDC125/ 150VDC
20 4011.5 15
-25 ~ 55°C -25 ~ 60°C-25 ~ 60°C
AMNETZ 10K
10000W
3 Phase-In 3 Phase-Out
250/ 250VDC
All specifications, designs and contents are subjected to changes without prior notice.
38
Solar
PROLiNK Solar System
PSI Off-Grid Series
PSI Off-Grid Series is an off grid PV inverter which consists of three power sources such as PV modules, battery power, and
AC power sources. The AC power source could be supply by the generator or utility grid. Offnetz utilizes either sun energy or
self-generated AC source to convert stable power for house and commercial applications. It’s perfect choice for long-term
power backup request in unstable power area and remote village.
• DSP plus microprocessor redundant controllers.
• Pure sine wave output
• Isolation design between inverter and battery.
• LCD display and recorded up to 15 years
• Provides multiple communication ports for remote
monitoring with software.
• Optional Modbus, SNMP, GPRS communication and AS400
OFFNETZ 2000
OFFNETZ 3000
dry contact.
• Option: On-Grid
Full Specifications
MODELS
Capacity
PV INPUT (DC)
Maximum DC Voltage
Full Load MPP Voltage Range
Maximum Input Current
AC INPUT
Nominal AC Voltage
Acceptable Voltage Range
Acceptable Frequency Range
Maximum Input Current
BATTERY MODE OUTPUT (AC)
Output Voltage
Output Frequency
Output Waveform
THDv
Power Factor
Efficiency (DC to AC)
Overload Capability
BATTERY & CHARGER
Nominal DC Voltage
Maximum Charging Current
PHYSICAL
Dimension (mm) D x W × H (Without Wheels)
Net Weight (kgs)
INTERFACE
Communication Port
Intelligent Slot
ENVIROMENT
Humidity 0 ~ 90% Relative Humidity (non-condensing)
Operating Temperature
Altitude
OFFNETZ 2000
2000W
500VDC 500VDC
170 ~ 450VDC
13A
100/ 110/ 120/ 127VAC
85 ~ 145VAC
57.5 ~ 62.5Hz 47.5 ~ 52.2Hz
31A 20A
100/ 110/ 120/ 127VAC 208/ 220VAC or 230/ 240VAC
60Hz 50Hz
Pure Sinewave
<3% @ Linear Load
>0.99
90% 92%
>110%: 5mins; >150%: 1min, 200%: Immediately
48VDC
25A
420 x 415 x 170
15.5
RS-232/ USB
Optional SNMP Card, ModBus Card, GPRS, And AS-400 Card Available
0 ~ 40°C
0 ~ 1000m (Power derating 1% every 100m when altitude is over 1000m)
OFFNETZ 3000
3000W
250 ~ 450VDC
208/ 220/ 230/ 240VAC
175 ~ 265VAC/ 175 ~ 280VAC
All specifications, designs and contents are subjected to changes without prior notice.
39
Solar
PROLiNK Solar System
PSS Series
PSS Series is standalone solar power station consists of a solar charge controller, inverter, and a battery pack. This
solar power station provides clean power and cheaper operation cost to home and commercial application. To consider
that facilitate and can be used under various circumstances, Sonnensys is design for easy installation and limited space
requirement.
• Easy installation: No technician need
• Low cost
• Unlimited and clean power source from sun
• Expandable based on project need
SONNENSYS 850 SONNENSYS 150/
SONNENSYS 15PRO
Full Specifications
MODELS
Capacity Volt-Amp/ Watt
INPUT (AC)
Voltage
Selectable
Voltage Range
Ferquency Range
OUTPUT (AC)
AC Voltage Regulation (Battery Mode)
Transfer Time
Waveform (Battery Mode)
SOLAR CHARGER
MPPT Range @ Operating Voltage 15 ~ 33VDC 30 ~ 66V
Maximum PV Array Open Circuit Voltage
Maximum PV Array Power
Maximum Charging Current
BATTERY
Number & Type of Battery
Battery Voltage
Floating Charge Voltage
Maximum Charging Current 35A (10A AC Charger + 25A Solar Charger) or 45A (20A AC Charger + 25A Solar Charger)
PROTECTION
Full Protection
ALARM
Low Battery
Overload
Battery Replacement
Fault Continuously Sounding
PHYSICAL
Dimension (mm) D x W x H (Without Wheels)
Net Weight (kgs)
OPERATING EBVIRONMENT
Humidity
Temperature
For PCs
For Home Appliances
100 ~ 120VAC ±5% or 200 ~ 2300VAC ±5%
Operating
Storage
SONNENSYS 850
850VA/ 480W
120VAC or 230VAC 230VAC
95 ~ 145VAC or 180 ~ 260VAC 180 ~ 260VAC
50 ~ 160VAC or 100 ~ 300VAC
Simulated Sinawave Pure Sinewave
31A 20A
50VDC 75VDC
300W 600W
1 x 12V100AH 2 x 12V100AH
12VDC 24VDC
13.7VDC ±2% 27.4VDC ±2%
480 x 250 x 450
53 92
0 ~ 90% Relative Humidity (Non-condensing)
SONNENSYS 1500 SONNENSYS 1500 PRO
1500VA/ 1050W
100 ~ 300VAC
50/ 60Hz (Auto-Sensing)
200 ~ 230VAC ±5% 230VAC ±5%
20ms Typical
18A
Overload & Short Circuit Protection
Sounding every secound
Sounding every 0.5 secound
Sounding every 2 secound
480 x 420 x 420
0 ~ 50°C
-15 ~ 70°C
94
All specifications, designs and contents are subjected to changes without prior notice.
40
Loading...