MATERIAL SAFETY DATA SHEET
Product number
844-006
.
1. Product and Company Identification
Product name Water Base Stainless Steel Maintainer
Effective date
11-Jan-2013
Company information
Claire Manufacturing Co.
1005 S. Westgate Drive
Addison, IL 60101 United States
Company phone
General Assistance 1-630-543-7600
Emergency telephone US
1-866-836-8855
Emergency telephone outside US
1-952-852-4646
Supersedes date
24-Jan-2011
Emergency overview
Aerosol. CONTENTS UNDER PRESSURE.
.
2. Hazards Identification
Routes of exposure
Skin contact. Ingestion.
Potential health effects
Eyes
Contact with eyes may cause irritation.
Skin
Frequent or prolonged contact may defat and dry the skin, leading to discomfort and
dermatitis.
Inhalation
Intentional misuse by concentrating and inhaling the product can be harmful or fatal.
Ingestion
Exposure by ingestion of an aerosol is unlikely. May cause delayed lung damage.
Components of the product may be absorbed into the body by ingestion.
Target organs
Central nervous system.
Chronic effects
May cause central nervous system disorder (e.g., narcosis involving a loss of
coordination, weakness, fatigue, mental confusion and blurred vision) and/or damage.
Signs and symptoms
Narcosis. Defatting of the skin. Skin irritation.
CAS # Percent
20 - 3064742-47-8
Components
Synthetic Isoparaffinic Hydrocarbon
8 - 10106-97-8n-Butane
3 - 574-98-6Propane
40 - 60Non-hazardous and other components below reportable levels
.
3. Composition / Information on Ingredients
Eye contact
Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact
lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation
develops and persists.
First aid procedures
.
4. First Aid Measures
Skin contact
Wash off with warm water and soap. Get medical attention if irritation develops and
persists.
Inhalation
If symptoms develop move victim to fresh air. Get medical attention if symptoms persist.
Ingestion
If material is ingested, immediately contact a poison control center. If vomiting occurs,
keep head low so that stomach content doesn't get into the lungs. If vomiting occurs
naturally, have victim lean forward to reduce risk of aspiration.
Notes to physician
Symptoms may be delayed.
Product name: Water Base Stainless Steel Maintainer
Product #: 844-006 Revision date: 11-JAN-2013 Print date: 11-JAN-2013
MSDS US
1 / 5
KA006
PRO-LINK STAINLESS STEEL POLISH & CLEANER
PRO LINK
CANTON, MA 02021 United States
PRO-LINK STAINLESS STEEL POLISH & CLEANER
Flammable properties
Vapor or gas may spread to distant ignition sources and flash back. Runoff to sewer may
cause fire or explosion hazard.
.
5. Fire Fighting Measures
Suitable extinguishing media
Foam. Dry chemical. Carbon dioxide (CO2). Do not use water jet.
Extinguishing media
Protective equipment and
precautions for firefighters
In case of fire and/or explosion do not breathe fumes. Containers should be cooled with
water to prevent vapor pressure build up. Move containers from fire area if you can do so
Protection of firefighters
Methods for containment
Stop leak if you can do so without risk. Move the cylinder to a safe and open area if the
leak is irreparable. Stop the flow of material, if this is without risk.
.
6. Accidental Release Measures
Methods for cleaning up
Should not be released into the environment. Use a non-combustible material like
vermiculite, sand or earth to soak up the product and place into a container for later
disposal.
Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface
thoroughly to remove residual contamination.
Handling
Pressurized container: Do not pierce or burn, even after use. Do not smoke while using
or until sprayed surface is thoroughly dry. Use only in area provided with appropriate
exhaust ventilation. Do not use if spray button is missing or defective. Do not re-use
empty containers. Avoid prolonged exposure.
.
7. Handling and Storage
Storage
Contents under pressure. Do not puncture, incinerate or crush. Do not handle or store
near an open flame, heat or other sources of ignition. Avoid exposure to long periods of
sunlight. Store in cool place. Keep out of the reach of children. Keep away from food,
drink and animal feedingstuffs. Level 1 Aerosol (NFPA 30B)
Exposure limits
ACGIH
Components CAS #
n-Butane 106-97-8
TWA
1000 ppm
STEL
Not established
Ceiling
Not established
space
Propane 74-98-6 1000 ppm Not established Not established
.
8. Exposure Controls / Personal Protection
OSHA
Components
space
CAS #
Propane 74-98-6
TWA
1000 ppm
STEL
Not established
Ceiling
Not established
Eye / face protection
Not normally needed.
Personal protective equipment
Skin protection
Chemical resistant gloves.
Respiratory protection
If permissible levels are exceeded use NIOSH mechanical filter / organic vapor cartridge
or an air-supplied respirator.
Appearance
Compressed liquefied gas.
.
9. Physical & Chemical Properties
Boiling point
266 °F (130 °C) estimated
Density
0.8303 g/cm3 estimated
Flammability (HOC)
17.9319 kJ/g estimated
Flash point
-156 °F (-104.4 °C) Propellant
Product name: Water Base Stainless Steel Maintainer
Product #: 844-006 Revision date: 11-JAN-2013 Print date: 11-JAN-2013
MSDS US
2 / 5
PRO-LINK STAINLESS STEEL POLISH & CLEANER