PROLiNK H5200C User Manual

PROLiNK

Combo ADSL2+ Modem/Router

Quick Installation Guide Revision 1.0

Hurricane 5200C

Package Contents

• 1 x H5200C Modem Router

• 1 x RJ-45 straight cable

• 1 x RJ-11 DSL cable

• 1 x Power Adaptor

• 1 x DSL Splitter

• 1 x Setup CD

• 1 x USB Cable (optional)

• Quick Installation Guide

Step 1 Hardware connection

Wall

Socket

Telephone

(Optional)

Computer Power

for H5200C

Adapter

Line USB LAN

Step 2a Configuring the H5200C Modem

1 Start your Web Browser ( IE6 or above), the

following windows will pop up to ask you to enter the username and password (provide by your ISP)

Power switch

Minimum System Requirements

 OS independent for Ethernet Connection  Windows XP/Vista for USB Connection  4x speed CD-ROM Drive  Ethernet Port or USB Port

Technical Support Information

Support Hotline: Support Email: Address:

(65) 63570666

support@fida.com

Block 16 Kallang Place, #06-02 Kallang Basin Industrial Estate, Singapore 339156 9am – 6pm (Mon – Fri)

1.1 Connect one end of RJ11 (Telephone) cable to the ADSL port (marked Line) on the ADSL Modem.

1.2 Connect the other end of RJ11 cable into the wall phone socket,

which has the ADSL service activated, or the ADSL port of a Micro-filter whichever is applicable.

1.3 Connect one end of the RJ45 (Ethernet) cable to the LAN port of

the computer. Connect another end of RJ45 cable to the ADSL Modem.

1.4 Connect power adapter to the power socket

1.5 Switch on the H5200C modem

Remark – for USB connection, please refer to the Driver Installation Guide on

the CD

2 If the internet connection is established, it will automatically

proceed to our homepage www.prolink2u.com, then you can start surfing now.

If Pop-up Blocker is enabled, the following message will

appear, please click and select Temporarily Allow

Pop-ups.

H5200C ADSL2+ Ethernet Modem Router Page 1 of 2 Revision 1.0 Feb 2009

© Copyright 2009 PROLiNK All Rights Reserved. PROLiNKis manufactured under the authority of FIDA INTERNATIONAL (S) PTE LTD. All brands or product names are either trademarks or registered trademarks of their respective owners.

If your ADSL Line not ready or not connected properly,

the following message will appear, please check your line and press Try Again Button.

Step 2b Manually Configuring the H5200C Modem ––

Step 2b Manually Configuring the H5200C Modem

please proceed to this step if step2a not working

1. Start your Web Browser ( IE6 or above), key in

192.168.1.1 , Click Quick Setup icon

3. From status, you can check your WAN IP, internet

connection time and so on

2. Enter User Name and Password for internet connection (provided by your Internet service provider), and Press Commit and Reboot button.

4. If you need to setup other features, Default User Name: admin Password: password

H5200C ADSL2+ Ethernet Modem Router Page 2 of 2 Revision 1.0 Feb 2009