Page 1
Material Safety Data Sheet
MSDS ID: SK-116B
* * * Section 1 - Chemical Product and Company Identification * * *
Product Name: Nutty White #93010606, #99022498
Product Use: Hand Cleanser
Manufacturer Information
Pro-Link, Inc. Non-Emergency Phone: (781) 828-9550
500 Chapman Street Emergency Phone: (800) 424-9300 North America
Canton, MA 02021 International Phone: (703) 527-3887 (Collect Call)
Emergency telephone numbers are to be used only in the event of chemical emergencies involving a spill, leak,
fire, exposure or accident involving the product. All Non-emergency questions should be directed to the Toll Free,
Non-Emergency number above.
* * * Section 2 - Hazards Identification * * *
Emergency Overview
No particular hazards known.
Potential Health Effects: Eyes
This product may cause slight irritation to the eyes.
Potential Health Effects: Skin
None.
Potential Health Effects: Ingestion
Seek medical attention.
Potential Health Effects: Inhalation
No adverse effects expected with intended use as a hand cleaner.
HMIS Ratings: Health: 1 Fire: 0 Reactivity: 0 Pers. Prot.: None required.
Hazard Scale: 0 = Minimal 1 = Slight 2 = Moderate 3 = Serious 4 = Severe * = Chronic hazard
* * * Section 3 - Composition / Information on Ingredients * * *
Component Information/Information on Non-Hazardous Components
This product is a cosmetic intended for personal use in the workplace and is thus regulated by FDA.
See container label regarding proper handling and use of this product.
Ingredients are listed in descending order of concentration on the container label.
For OSHA workplace hazards, investigate and read and understand component MSDS’s before manufacturing.
Toxic Substances Control Act (TSCA): Exempt
Workplace Hazardous Materials Information System (WHIMS-Canada): Exempt-cosmetic hand cleanser
____________________________________________________________
Page 1 of 5 Issue Date: 07/30/2010 Revision: 1.0000 Print Date: 7/30/2010
Page 2
Material Safety Data Sheet
Product Name: Nutty White MSDS ID: SK-116B
* * * Section 4 - First Aid Measures * * *
First Aid: Eyes
In case of contact, immediately flush eyes with large amounts of water, continuing to flush for 15 minutes. If
irritation persists get medical attention.
First Aid: Skin
Intended as a cosmetic hand cleaner.
First Aid: Ingestion
If material is swallowed, get medical attention or advice.
First Aid: Inhalation
None identified.
* * * Section 5 - Fire Fighting Measures * * *
General Fire Hazards
None.
Upper Flammable Limit (UFL): Not determined
Lower Flammable Limit (LFL): Not determined
Method Used: PMCC
Flash Point: >212oF
Flammability Classification:
Auto Ignition: Not determined
Hazardous Combustion Products
None identified.
Extinguishing Media
Dry chemical, foam, carbon dioxide, water fog.
Fire Fighting Equipment/Instructions
Firefighters should wear self-contained air supplied breathing apparatus in enclosed areas or in areas of heavy
smoke or fumes.
NFPA Ratings: Health: 1 Fire: 0 Reactivity: 0
Hazard Scale: 0 = Minimal 1 = Slight 2 = Moderate 3 = Serious 4 = Severe
* * * Section 6 - Accidental Release Measures * * *
Containment Procedures
Absorb spill with inert material.
Clean-Up Procedures
Absorb spill with inert material. Shovel material into appropriate container for disposal. Flush small residuals to
the drain for normal biological wastewater treatment.
Evacuation Procedures
None.
Special Procedures
None.
____________________________________________________________
s
Page 2 of 5 I
sue Date: 07/30/2010 Revision: 1.0000 Print Date: 7/30/2010
Page 3
Material Safety Data Sheet
Product Name: Nutty White MSDS ID: SK-116B
* * * Section 7 - Handling and Storage * * *
Handling Procedures
Keep container closed. See container label for proper use.
Storage Procedures
Protect from freezing or excessive heat to prevent component separation.
* * * Section 8 - Exposure Controls / Personal Protection * * *
Exposure Guidelines
A: General Product Information
FDA regulated. For OSHA workplace hazards, investigate and read and understand component MSDS’s before
manufacturing.
B: Component Exposure Limits
No information is available.
Engineering Controls
None necessary.
PERSONAL PROTECTIVE EQUIPMENT
Personal Protective Equipment: Eyes/Face
Avoid eye contact.
Personal Protective Equipment: Skin
None.
Personal Protective Equipment: Respiratory
Not required for product end use.
Personal Protective Equipment: General
Obey reasonable safety precautions and practice good housekeeping.
* * * Section 9 - Physical & Chemical Properties * * *
Appearance:
Physical State:
Vapor Pressure:
Boiling Point:
Solubility (H2O):
Evaporation Rate:
Off-white paste
Emulsion
Not Established
>212oF
Disperses in water
<1
* * * Section 10 - Chemical Stability & Reactivity Information * * *
Chemical Stability
Stable under usual application conditions.
Chemical Stability: Conditions to Avoid
None.
Incompatibility
None identified.
Hazardous Decomposition
None identified.
Vapor Density:
Melting Point:
Specific Gravity:
Odor:
pH:
Flash Point:
perfume fragrance
4.9-5.3
Not Established
Not Established
1.07 g/cc3
212oF (PMCC)
____________________________________________________________
s
Page 3 of 5 I
sue Date: 07/30/2010 Revision: 1.0000 Print Date: 7/30/2010
Page 4
Material Safety Data Sheet
Product Name: Nutty White MSDS ID: SK-116B
Hazardous Polymerization
a
zardous polymerization will not occur.
H
* * * Section 11 - Toxicological Information * * *
Acute and Chronic Toxicity
A: General Product Information
None.
B: Acute Toxicity-LD50/LC50
No LD50/LC50's are available for this product's components.
Carcinogenicity
A: General Product Information
Not listed by ACGIH, IARC, NIOSH, NTP OR OSHA.
B: Component Carcinogenicity
No information is available.
Other Toxicological Information
None.
* * * Section 12 - Ecological Information * * *
Ecotoxicity
A: General Product Information
No information available.
B: Component Analysis - Ecotoxicity - Aquatic Toxicity
No information available,
Environmental Fate
No information available.
* * * Section 13 - Disposal Considerations * * *
US EPA Waste Number & Descriptions
A: General Product Information
Controlled release of diluted product into a biological wastewater treatment plant.
B: Component Waste Numbers
No EPA Waste Numbers are applicable for this product's components.
Disposal Instructions
Dispose of waste material according to Local, State, Federal, and Provincial Environmental Regulations.
* * * Section 14 - Transportation Information * * *
International Transportation Regulations
This product is not regulated as a hazardous material by the United States (DOT) or Canadian (TDG)
transportation regulations.
____________________________________________________________
s
Page 4 of 5 I
sue Date: 07/30/2010 Revision: 1.0000 Print Date: 7/30/2010
Page 5
Material Safety Data Sheet
Product Name: Nutty White MSDS ID: SK-116B
* * * Section 15 - Regulatory Information * * *
US Federal Regulations
A: General Product Information
Not subject to TSCA regulation. Regulated as a personal use cosmetic by FDA.
B: Clean Air Act
No information is available.
C: Component Analysis
No information is available.
D: Food & Drug Administration
None of the components in this product are listed by the FDA under regulations for Direct and Indirect Food
Additives.
State Regulations
A: General Product Information
None identified.
B: Component Analysis - State
None of this product's components are listed on the state lists from CA, FL, MA, MN, NJ, or PA.
Component Analysis - WHMIS IDL
Bronopol component @ <0.1% (CAS # 52-51-7)is listed in the WHMIS IDL.
* * * Section 16 - Other Information * * *
Other Information
The information provided in this Material Safety Data Sheet is correct to the best of our knowledge, information
and belief at the date of its publication. The information given is designed only as guidance for safe handling,
use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality
specification. The information relates only to the specific material designated and may not be valid for such
material used in combination with any other materials or in any process unless specified in the text.
MSDS Revision information:
This is a revised MSDS. Section's 2 & 3 reflect proposed ANSI Standards format recommendations for 2007
implementation.
1/13/09 Reviewed with no changes to content.
Contact: Product Compliance Officer
Contact Phone: (800) 242-2271
This is the end of MSDS #: SK-116B
____________________________________________________________
s
Page 5 of 5 I
sue Date: 07/30/2010 Revision: 1.0000 Print Date: 7/30/2010
Loading...