PROLiNK 8000 User Manual
HURRICANE 8000 ADSL MODEM
USERS MANUAL
VER 1.50
WARNING
* During times of lightning/ thunderstorm, unplug the phone cable from
modem while not in use.
* Keep the modem away from water and direct sunlight.
SECTION 1 Lets Begin
1.1 Package Contents P1
1.2 Product View P2
1.3 What you need to start ADSL P3
CONTENTS
SECTION 2
Hardware Installation
2.1 Hardware Configuration Overview P4
2.2 Connecting Hurricane 8000 to PC P5
2.3 Connecting Hurricane 8000 to Phone/ Fax P5
SECTION 3
Software Installation
3.1 Two alternative methods to Install P6
3.1.1 Standard Installation (Recommended) P7 - P9
3.1.2 Plug and play Installation P10 - P13
3.2 Verifying the setup - DSL, CSA P14 - P16
SECTION 4
Begin to Surf
4.1 Connect to Internet P17
4.2 Release Connection P18
SECTION 5 Frequently Ask Questions and Troubleshooting P19 - P24
SECTION 6
SECTION 7
Uninstalling Hurricane 8000 ADSL Modem P25
PROLiNK Technical Support P26
Section 1 Lets Begin
1.1 Lets Check the Package Contents
Hurricane 8000 and Modem Stand (With Built-in Microfilter)
Installation CD & Users Manual
USB Cable
Telephone Cable (RJ-11)
Notice: Please contact your dealer immediately if there are any missing items in your Hurricane 8000 package.
P1
1.2 PRODUCT VIEW
Section 1. Lets begin
Power LED (In green color)
Light ON once detected; Light blinks during data transfer
LINK LED (In green color)
Light ON when the connection is ON.
USB Connector
To connect to your PC
Telephone Jack
To connect to your phone/fax
Line Jack
For RJ-11, to connect to ADSL line (main phone socket)
P2
1.3 What you need to start the ADSL
DSL Line
*
ADSL ( Broadband) Service must be activated on your telephone line
* If you are sharing the line with more than 1 phone, micorfilter (s) must be installed to
decoupling ADSL and telephone signals.
ervice Provider
* You must get a User Name and Password from your local Internet Service Provider for
Internet Access.
omputer
* Pentium II MMX 233 or higher IBM Compatible PC
* Microsoft Windows 98SE / ME / 2000/ XP
* 64MB of RAM
* 20 MB of free Hard Disk Space
* Available USB port
* CD-ROM drive for drivers and software installation
Section 1: Lets Begin
P3
2.1 Hardware Configuration Overview
Section 2. Hardware Installation
USB cable to PCs USB port
Telephone
Other Phone socket -2
Microfilter -1
-1 Microfilter is optional, can be purchased through dealer / manufacturer.
Microfilter is needed to:- Filter line noise;
-2 For additional phone socket which is in use and is sharing the same line, you will need to attach with an external
microfilter.
Telephone
Hurricane 8000
Main Phone Socket
- Prevent line noise when there are incoming/ outgoing calls;
- Prevent drop in modem connection speed.
PC
P4
Section 2. Hardware Installation
2.2 Connecting Hurricane 8000 to PC
From PCs USB port Hurricane 8000
Step 1: One end of the USB cable is to be connected to the USB port of your computer.
Step 2: The other end of the USB cable is to be connected to the modem.
2.3 Connecting Hurricane 8000 to Phone
From PC Telephone
The Main Phone Socket
Hurricane 8000
Step 3: One end of the telephone cable (RJ-11) is to be connected to the LINE jack on the
modem. Connect the other end of the telephone cable to the telephone wall socket.
Step 4: Either your telephone/ fax can be connected to the modems PHONE jack.
There is NO NEED for microfilter in between as it is already built-in into the modem.
P5
Section 3. Software Installation
3.1 Two Alternative methods to install
The Installation procedures might be slightly different depending on the Microsoft Windows
OS you are using. As Hurricane 8000 ADSL modem is a true plug-and-play device, you can
use either Standard or Plug and Play installation procedures to install the driver.
By the way, both methods are equally valid.
Standard Installation ( Recommended)
This is the most recommended way for the installation of Hurricane 8000, you will need
to go through lesser steps and require only one time reboot.
Plug and Play Installation
Refer the driver files to your PC once the Hurricane 8000 is detected.
After reboot, the installation will resume and reboot again after completion
-3
. -3
-3 Number of reboot will depend on the different Operating System.
P6
Loading...