Pro-Link 120056 User Manual

Material Safety Data Sheet
Printed: 13.06.2005
Revised: 13.06.2005
Lithofin OIL-EX
————————————————————————————————————————————— 1 Identification of substance:
Product details:
Trade name: Lithofin OIL-EX Application of the substance / the preparation Cleaner
Distributor:
GranQuartz, L. P. P.O. Box 2206 Tucker, GA 30085-2206/USA
Information Department:
see above
Emergency Information:
information department
24-Hour Emergency Telephone Number: 1-800-255-3924 (USA & Canada) or 813-248-0585
—————————————————————————————————————————————
2 Composition/Data on components:
Chemical characterization Description: Solvent based cleaner
Dangerous components:
64742-82-1 Naphta, hydrodesulfurized heavy with < 1%benzene 90 % 1330-20-7 xylene, mixed isomers, pure 2.5-10 % RTECS: ZE 2100000 95-63-6 1,2,4-trimethylbenzene < 2.5 % 100-41-4 ethylbenzene < 2.5 % RTECS: DA 0700000
Additional information
Benzene < 0,1 % For further components with limit values which require monitoring at the workplace please see chapter
8.
TSCA
1330-20-7 xylene, mixed isomers, pure 95-63-6 1,2,4-trimethylbenzene 100-41-4 ethylbenzene 112926-00-8 Silica, amorphous 64742-82-1 naphtha (petroleum), hydrodesulfurized heavy —————————————————————————————————————————————
3 Hazards identification
Hazard description: Dangerous for the environment Information pertaining to particular dangers for man and environment
Flammable. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment
Classification system
The classification is in line with internationally approved calculation standards. It is expanded, however, by information from technical literature and by information furnished by supplier companies.
NFPA ratings (scale 0-4)
Health = 2 Fire = 3 Reactivity = 0 —————————————————————————————————————————————
4 First aid measures
1
Material Safety Data Sheet
Printed: 13.06.2005
Revised: 13.06.2005
Lithofin OIL-EX
General information
Immediately remove any clothing soiled by the product.
After inhalation
Remove victim from contaminated area. If breathing is difficult, give oxygen. If breathing stops, provide artificial respiration. Call a doctor.
After skin contact
Clean effected skin thoroughly with water and a mild cleansing agent. No residues shall remain on the skin.
After eye contact
Rinse opened eye for several minutes under running water. Seek medical treatment.
After swallowing
Rinse mouth with water. Do not induce vomiting Seek medical treatment. If vomiting occurs spontaneously: Hold the head of the casualty low with the body in a prone position in order to avoid penetration of vomit into the air tube. If babies/toddlers are concerned always consult a physician or the local Poison Information Centre.
Information for doctor Treatment Symptomatic treatment
—————————————————————————————————————————————
5 Fire fighting measures
Suitable extinguishing agents
Foam Extinguishing powder Carbon dioxide Sand Use fire fighting measures that suit the environment.
For safety reasons unsuitable extinguishing agents Water with full jet. Special hazards caused by the material, its products of combustion or resulting gases:
Dangerous decomposition products see chapter 10: stability and reactivity
Protective equipment:
Wear self-contained respiratory protective device.
Additional information
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations. Collect contaminated fire fighting water separately. It must not enter the sewage system. —————————————————————————————————————————————
6 Accidental release measures
Person-related safety precautions:
Ensure adequate ventilation Wear protective clothing. Keep unprotected persons away.
Measures for environmental protection:
Do not allow product to reach sewage system or any water course. Inform respective authorities in case of seepage into water course or sewage system. Do not allow to penetrate the ground/soil. In case of seepage into the ground inform responsible authorities.
Measures for cleaning/collecting:
Absorb with non-combustible material like sand, soil, diatomite. Ensure adequate ventilation. Send for recovery or disposal in suitable receptacles. Dispose contaminated material as waste according to item 13. —————————————————————————————————————————————
7 Handling and storage
Handling Information for safe handling:
2
Material Safety Data Sheet
Printed: 13.06.2005
Revised: 13.06.2005
Lithofin OIL-EX
Use only in well ventilated areas. Avoid contact with eyes and skin. Keep receptacles tightly sealed. Use solvent-proof equipment. Avoid inhalation of vapours.
Information about protection against explosions and fires:
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Storage Requirements to be met by storerooms and receptacles:
Store receptacles tightly closed at a cool and dry place with sufficient ventilation Provide solvent resistant, sealed floor. Prevent any seepage into the ground.
Information about storage in one common storage facility:
Store away from foodstuffs. Store away from feed. Further information about storage conditions: None. —————————————————————————————————————————————
8 Exposure controls and personal protection
Additional information about design of technical systems:
No further data; see item 7.
Components with limit values that require monitoring at the workplace:
112926-00-8 Silica, amorphous PEL: Short-term value: 80 mg/m³
as % SiO2 REL: 6 mg/m³ TLV: 10 mg/m³ (e)
1330-20-7 xylene, mixed isomers, pure PEL: 435 mg/m³, 100 ppm REL: Short-term value: 655 mg/m³, 150 ppm Long-term value: 435 mg/m³, 100 ppm (o-, m-, & p-isomers) TLV: Short-term value: 651 mg/m³, 150 ppm Long-term value: 434 mg/m³, 100 ppm BEI
95-63-6 1,2,4-trimethylbenzene REL: 125 mg/m³, 25 ppm TLV: 123 mg/m³, 25 ppm
100-41-4 ethylbenzene PEL: 435 mg/m³, 100 ppm REL: Short-term value: 545 mg/m³, 125 ppm
Long-term value: 435 mg/m³, 100 ppm TLV: Short-term value: 543 mg/m³, 125 ppm
Long-term value: 434 mg/m³, 100 ppm
BEI
Additional information:
The lists that were valid during the creation were used as basis.
Personal protective equipment General protective and hygienic measures
Keep away from foodstuffs, beverages and feed. Wash hands before breaks and at the end of work. Avoid contact with the eyes and skin.
3
Loading...
+ 4 hidden pages