projectiondesign F30 wuxga Product Sheet
professional projector series
COMPA TIBLE
COMPA TIBLE
F30 wuxga
true 1920 x 1200 resolution
DLP® BrilliantColor™ technology
up to 4300 ANSI lumens
failsafe 24/7 and DuArch™ operation
The F30 wuxga has been designed to provide the ultimate in resolution, image quality, and configurability to
professional users whose requirements for reliability and flexibility are top priorities.
1920 x 1200 pixel resolution professional projector
The new projectiondesign F30 wuxga is the top of the range in our highly
acclaimed F30 series. With its high resolution at a true 1920 x 1200 pixels,
it provides the highest performance single chip DLP® projector available
anywhere. WUXGA, as the standard high resolution output for many
graphics cards and computers, is a perfect match for visualisation suites
and simulation projects, where image detail and fidelity are the strongest
concerns, not to mention board rooms and auditoriums where compatibility
are amongst the requirements.
Add BrilliantColor™ technology
BrilliantColor™ technology from Texas Instruments® gives, with our new
six-colour image processing, the F30 wuxga a wider colour gamut, with
better saturation, and truer colours than standard DLP projectors or 3LCD
projectors. The technology allows adding not only RGB, but also Cyan,
Magenta, and Yellow to the image processing, resulting in purer colours and
less cross-colour contamination. The extra saturation and gradation result
in natural colours that are incredibly difficult to display with only primary
colours.
Designed for reliability
The F30 wuxga shares all features with other F30 series projectors to provide
failsafe and reliable operation. At its heart sits our patented DuArch™
illumination architecture that allows for hot swapping of lamps while in
operation, and DLP technology that is recognized as the most reliable of all.
DuArch™ features dual colour wheels, dual illumination optimizers, and dual
illumination optics. For status monitoring, a backlit LCD panel is available for
direct and immideate overview and events logging. In addition, direct view
status lights communicate lamp operation. The F30 wuxga also features
complete control and asset management over TCP/IP from any remote
computer, using standard tools, or through our own ProNet.Manager asset
management software suite.
Configuration options
The F30 wuxga can be configured with any one of six different high quality
projection lenses, and with different colour wheels allowing tailoring it to
specific applications. With some models, there are also customizable I/O and
image processing sections, through the use of our XPort™ technology.
www.projectiondesign.com
dnx
COMPATIBLE
dnx
COMPATIBLE
dnx
COMPATIBLE
High performance optics
123.1
163.3
78.8
15.5
539582.5
378.1
111.8
The key to optimum image quality, and installation flexibility is ensured with a
wide range of all-glass projection lenses, covering 0.79 – 6.5 : 1 throw ratios.
All lenses are user replaceable and can be shifted ±115% vertically and
±90% horizontally, for total freedom in projector placement.
Unique projectiondesign RealColor technology
Our proprietary RealColor technology simplifies set up routines and
calibration, and ensures a near perfectly rendered image with any given input
source. Every projector is uniquely characterized at the factory, for ultimate
accuracy in colour and greyscale reproduction.
The benefit over 1080p resolution
Adding 120 horizontal lines over the video centric 1080p resolution gives
more than meets the eye. With a full 1920 x 1080 video image displayed –
unaltered – there is still room for menus and other items, used for instance
in video editing suites. More importantly, it displays the full screen resolution
of modern computers at their highest fidelity, and gives more pixels and
desktop on screen in visualisations and presentations.
Full 10-bit colour resolution and HDMI 1.3a
The F30 wuxga provides true 10-bit colour resolution, for a total of more
than 1 Billion displayable colours. Reduced image gradation and solarization
professional projector series
effects, and the high bandwidth of HDMI 1.3a with support for 12-bit
DeepColor sequres a future proof investment. Our unique DPEq (Digital Pixel
Equalization) allows up to 30m (100 ft) long HDMI and DVI runs without loss
of signal and image quality, when using 24 AWG cables.
projectiondesign ProNet.Manager asset management
Optional asset management software allows easy management of large
site installations, or even multi-site installations, supporting hundreds of
projectors from a single interface.
Technical specifications F30 wuxga
projector WUXGA DLP digital projector
display concept single chip, powered lens shift design
optics and lamp available lenses six options covering 0.79 - 6.5 : 1
connectivity digital 1x HDMI 1.3a (HDCP) with DPEq
compatibility digital 1x HDMI / 1x DVI-D (640x480 -1920 x 1200 at
general dimensions (dwh) 376 x 510 x 223 mm (excluding lens)
technology 0.96” WUXGA DMD™ (Digital Micromirror Device™)
resolution 1920 x 1200 pixels
brightness up to 4300 ansi lumens (VizSim)
contrast ratio up to 7500 : 1 (user configurable)
aspect ratio 16 : 10 (native), 1.78, 1.85, 2.35 and 1.33 : 1 compatible
colours 30-bit (> 1 Billion displayable colours)
focusing distance 0.5 – 40m / 1.5 - 130 ft (customizable)
optical lens shift vertical: ±115%
lamps 2x300W UHP™
lamp life 2000 hours full power mode, 2500 hours at 80%
analogue 2x RGBHV (5x BNC and 15-pin HDDSUB)
optional input module HD-SDI, SDI
analogue RGBHV, RGBS, RGSB, virtually any signal up to 1920 x
asset management projectiondesign ProNet.Manager – asset management
control RS-232C (in/out), TCP/IP, IR, 2x 12V triggers
weight 12.6 kg / (excluding lens)
supplied accessories IR remote control, cable kit
power requirements 90 – 240 VAC, 50/60 Hz, +/- 10%, <1050W
conformances CE, CSA “C/US”, FCC Class A, CCC
available colour black metallic, silver metallic
warranties 2 years parts and labour,
horizontal: ±90%
4000 / 5000 hours in auto single lamp relay mode
1x DVI-D (HDCP) with DPEq
1x component video, 1x S-video, 1x video
up to 225 MHz pixelrate)
1x HD-SDI / SDI (SMPTE 292M and 292M-C (optional)
1200 at 60 Hz and 205 MHz pixelrate
software for an unlimited number of projectors (optional)
500 hours or 90 days on lamp, conditions apply
3rd year, 24/7 warranty optional
Wide range of projection lenses
EN 12 Ultra wide angle 0.79 : 1 fixed focal (on axis only)
±125% vertical
±90% horisontal
EN 11 Standard zoom 1.60 – 2.32 : 1
EN 13 Wide angle zoom 1.24 – 1.60 : 1
2.0 – 15 m
EN 15 Wide angle 1.16 : 1
1.0 – 15 m
Multiple lens options allow for flexibility in installations.
Available versions
Colour Wheel
VizSim (RGBCMY) (standard)
Available colours: black metallic -08 (standard), silver -14 (option)
602-0250-01
© 2008 projectiondesign as. All rights reserved. All brands and trade names are the property of their respective owners.
Specifications subject to change without prior notice. All values are typical and may vary. Please visit our website for
latest specifications and product offerings.
0.5 – 2.5 m
1.0 – 15 m
EN 16 Long Tele Zoom 3.80 – 6.50 : 1
4.0 – 40 m
101-1421-xx
EN 14 Tele zoom 2.37 – 3.79 : 1
2.0 – 30 m
Expandable input panel
The comprehensive input panel features HDMI 1.3a and DVI for high resolution digital imaging,
and can be expanded with HD-SDI and SDI input modules (not available on all models).
Distributed by:
Standardised bolt-on ceiling mount interface
M6 Threads
www.projectiondesign.com
Loading...