Product: Technical Data
5 Year Warranty
Transmitter
Dimensions 67mm (w) - 20mm (d)
Weight 40g
Frequency 433.92MHZ
Signal Distance
Standby Power 0W
Operating Pressure 350g
Dimensions 67mm
Weight 56g
Power Supply 110-240V AC
Plug UK 3 Pin
Standby Power 0.25W
Outdoors 80m - Indoors 30m (can pass
through walls)
Receiver
Please Register at:
www.curv360.co.uk/warranty
1. Warranty is 5 years from the purchase date.
2. If your product is faulty within the 5 year warranty, please supply us with the complete
warranty details and a proof of purchase at www.curv360.co.uk/warranty
3. If the product has been damaged due to incorrect operation or user damage, this
warranty will be invalid.
curv360.co.uk
THE SELF POWERED
WIRELESS DOORBELL
1 Transmitter/ 1 Receiver
CURVWB01
User Manual
curv360.co.uk
Step 1: Quick Setup
When the receiver is plugged in, the
doorbell will ring once
4 volume levels.
Over 30 dierent tunes.
Step 2: Test
When you press the transmitter, the
receiver rings.
Step 3: Install
Option 1
1.) Remove the double sided tape
Option 2
Note: Please ensure that the xing surface, is clean, dry and grease free.
2.) Stick to the wall
1.) Remove the double sided tape
and stick to the wall, secure the
xing with extra screws using the
holes provided
Setup: Re-pairing
The doorbell has already been paired and is ready to use. However
when adding or replacing the transmitter you will need to re-pair. One
transmitter can control several receivers or several transmitters can
control one receiver, should you wish to buy additional units.
1.) Press and hold any button, on the side
of the receiver for at least 3 seconds.
2.) Press the transmitter, the receiver will
start to ring.
Setup: Un-pairing
1.) Press and hold any button, on the side
of the receiver for at least 10 seconds.
Loading...