Pro-ject Audio RPM-1 Brochure
Product information
Pro-Ject RPM 1 Genie
Manual turntable with fitted cartridge
Ortofon OM 3E
Turntable
Chassis available in matt black
A quiet running synchronous motor with a two-step metal pulley drives the platter's outside edge via a
rubber belt.
The drive motor is isolated on its own platform and completely decoupled from the plinth to eliminate
vibration transmission.
The resonance-optimised platter is made of medium density fibre.
A inverted, chrome-plated stainless-steel axle runs on a polished metal ball in a sintered bronze bearing
housing.
Connection to the phono input of the amplifier can be made with connecting cables of your taste through
the gold plated phono sockets and earth screw.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 8.6s
The turntable is supplied with Ortofon OM 3E MM-cartridge fitted.
The headshell and armtube are fashioned from a single piece of aluminium.
The horizontal bearings consist of two hardened stainless steel points and ballraces.
Eccentrically mounted counterweight reduces cantilever forces and dynamic wow when playing
warped records.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
The S-shaped armtube with an effective length of 8,6" reduces toe-in error.
The internal wiring consists of silver coated, high-purity copper.
Dimensions W x H x D: 380 x 115 x 350mm
Cartridge: Output voltage 4mV. Recommended load resistance 47kohms (MM-input).
The manufacturer reserves the right to alter the technical specifications without notice.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 1.12.08
Loading...