![](/html/be/bea3/bea37ccb96a62bcc509805f38cc8855c9838efd203ff8487ad96948c3832bfd0/bg1.png)
Product information
Pro-Ject Record Box USB
MM Phono Pre-amplifier with
A/D converter and USB output
Good sound from sound technology
Metal case shields the electronics from vibrational and electromagnetic interference
Optimal channel separation through dual-mono circuitry
Special low-noise ICs used
Gold plated RCA connection sockets
Outboard power supply included
Features
Digitalisation of analog signals for recording direct to disk via USB with suitable recording programs
Runs on Windows™ and Mac OS™operating systems
Small size allows installation close to record player
Technical specifications
Input impedance: 47kohms/100pF
Gain: 32dB
Output voltage typically: 200mV/1kHz at 5mV/1kHz
Noise floor: 82dB (88dB - A weighted)
THD: <0,05%
RIAA-equalisation curve accuracy: 20Hz - 20kHz / max. 0,5dB
A/D converter: 16-Bit Delta Sigma
Sampling rate: 48kHz
USB-output: digital serial data protocol USB 1.1
Operating systems: Windows™ and Mac OS™
Outboard power supply: 16V/200mA AC, suitable for your country's mains supply
Power consumption: 16V/100mA AC
Dimension W x H x D: 105 x 30 x 75mm
Weight: 350g without power supply
The manufacturer reserves the right to alter the technical specifications without notice.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 1.12.08