Pro-ject Audio Pre Box Brochure

Product information

Pro-Ject Pre Box

Pre-amplifier with remote control

Good sound from sound technology

 Metal case shields the electronics from vibrational and electromagnetic interference  Optimal channel separation through dual-mono circuitry  Special low-noise ICs used  Gold plated RCA connection sockets  Outboard power supply included

Features

 Remote controllable  Small size allows easy placement  Optional input expander Pro-Ject Switch Box providing four additional inputs. Automatic synchronization

with the input selector of the Pro-Ject Pre Box.

 Remote power switching for connected units via on/off switch (Trigger Pre)

Technical specifications

Frequency response: 20Hz - 20kHz (+ - 0,2 dB) Noise floor: -100dB (A weighted) THD: 0,001% Gain: 8,5dB Pre out: 1 pair RCA/Phono sockets Output voltage typically: 1V at 1kHz Line-level inputs: 2 pairs RCA/Phono sockets Input impedance: 20kohms Trigger: 12V DC switching voltage

Trigger Amp: 2-pole co-axial ∅ 2,5mm jack

Trigger Switch Box: 2-pole co-axial ∅ 2,5mm jack Outboard power supply: 16V/500mA AC, suitable for your country's mains supply Power consumption: 16V/200mA AC Dimension W x H x D: 103 x 76 x 141mm Weight: 630g without power supply

The manufacturer reserves the right to alter the technical specifications without notice.

Available in silver or black finish

Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger

1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697