Pro-ject VC-S2 ALU User Manual

INSTRUCTIONS FOR USE

Pro-Ject VC-S2 ALU

2

3

Pro-Ject VC-S2 ALU

Controls, features and connections

1 Vacuum arm* (adhesive velvet strips attached) 2 Clamp* (base plate) 3 Fixing screw for base part of clamp* 4 Ventilation outlet and drain hole 5 Main switch with mains power cord socket 6 Vacuum on/off switch 7 Motor on/off direction switch 8 Vinyl record (not included) 9 Screwable clamp - top plate* with self-adhesive record label seal*

with rubber for sealing record label 10 Hexagon screw for motor flange height adjustment (see page 6) 11 Spindle with motor flange 12 Vacuum arm flange 13 Self-adhesive record label seal*

Accessories (included, but not shown above)

1 Wash it vinyl cleaning concentrate (100ml bottle, mixing ratio 1:10 - 1:20)* 2 Goat hair brush* 3 Replacement adhesive strips for vacuum arm* 4 AC power cord*

Optional accessories (available on request)

 Wash it cleaning concentrate, mixing ratio 1:10 - 1:20

bottle sizes: 100ml/250ml/500ml/1l (100ml ≙ 135 records / both sides, this average quantity depends on dilution ratio and the amount of ready-to-use cleaning fluid used per application)

 Goat hair brush  Adhesive strips for vacuum arm