Pro-Ject Tube Box S2 Product Information

PRODUCT INFORMATION
TUBE BOX S2
Tube phono-preamplier
MSRP 359
• Suitable for MM and MC cartridges
• Precise RIAA equalisation in two parts, passive/active
• Fully discreet circuit design without OpAmps
• Front-sided Subsonic lter button
• Front-sided Gain control
• Ultra low noise circuitry with FET input stage
• Dual mono circuitry for optimized channel separation
• Polystyrene capacitors used where possible
• Gold-plated RCA in and outputs
• External power adaptor and multiple internal power
supplies
• Well-ltrated high-voltage anode power supply
• Sandwich alu/metal casing protects from vibrations
and electromagnetic interference
• Finishes: silver or black
(incl. VAT)
colour options:
Tube assembly: 2x ECC83 (12AX7)
Input impedance: 10/100/470/1k/2k ohms, x 47k ohms
Capacitance: 50 / 150 / 270 / 370 / 490 / 590 pF
Gain MM / MC: 40 / 43 / 50 / 60 / 63 dB
Signal-to-noise ratio: 77dBA
THD+N: < 0,0025%
RIAA curve accuracy: +/- 0,4dB/20Hz - 20kHz
Subsonic lter: 20Hz @ 12dB/octave
Input / Output: 1x RCA / 1x RCA
Dimensions WxHxD: 103 x 73 x 119 mm
PRO-JECT AUDIO SYSTEMS
www.project-audio.com
Technical data and price changes reserved.
Page 1/2
Innovative miniature sized phono
preamplier with tube output and high
end sound!
Tube Box S2 is our very rst product to feature a fully discreet circuit design without using any operational ampliers (OpAmps). It also is the rst product to come with replaceable tubes for tube rolling and sound-shaping. This gives the customer many options to pick from and alter the sound signature to his prefe­rence. Tube Box S2 will give a full and relaxed laid back sound with lush mids, just like you would expect it from a much bigger high end tube phono pre-amplier. It oers support for both MM and MC cartridges and comes with many gain settings to be switched on the front panel. Five variable input impedance settings are available to adjust to any MM cartridge, the 47k ohms input impedance setting is xed and suited for high output MC cartridges. The aluminium/metal casing is adapted to
PRODUCT INFORMATION
our DS2 line in looks and protects against vibrations and electromagnetic interferences for superior sound. A true high end solution in a much smaller package!
PRO-JECT AUDIO SYSTEMS
www.project-audio.com
Technical data and price changes reserved.
Page 2/2
Loading...