T1 Setup Guide
Please read before unpacking.
1 Unpack all items from accessory bag.
a)
c)
b)
d)
4 Remove the protection covering.
a) Connect it E (RCA cable)
Detachable cable only included with T1 Phono SB & T1 BT
b)Drive belt
c)Stylus pressure gauge
d)Adapter for 7“ singles
5 Unpack the power supply.
Beware of breaking the needle!
8 Put the platter on the turntable. |
9 Put the felt mat on the platter. |
|
|
T1
Connect to any amp with integrated phono amplifier or use an external phono preamp.
Pre-mounted Connect it E (RCA cable) included.
Possible set: Pro-Ject Speaker Box 5 (bookshelf speaker) and Pro-Ject MaiA S2 (stereo integrated amplifier).
T1 Phono SB
Select Line Out to connect to an amplifier without a phono stage. Select Phono Out if you have an amplifier with a phono stage.
Possible set: Pro-Ject Speaker Box 5 (bookshelf speaker) and Pro-Ject Stereo Box S2 (smallest audiophile integrated amp).
Getting started:
•Make sure to have enough space to unpack your turntable.
•Always unpack and setup in a clean enviroment.
•Important for warranty: Do not throw packaging away.
•Setup is demonstrated with T1 Phono SB.
2 Remove dust cover carton from the box.
6 Unpack the platter.
3 |
Lift the wrapped turntable |
out of the box. |
|
|
|
7 |
Put the drive belt on the pulley |
& sub-platter. |
Speed Change:
|
Small pulley |
|
33 RPM |
|
|
Large pulley |
|
45 RPM |
|
|
|
|||
|
T1 Phono SB: Speed Selector 33/45 |
|||
10 Remove tonearm twist tie. |
11 |
Connect to your hifi-system |
||
and enjoy your music! |
||||
|
|
|
|
|
Connect it E (RCA Cable)
Speaker cable |
Speaker cable |
Connect it E (RCA Cable)
>
>
Speaker cable |
Speaker cable |
T1 BT
Select Line Out to connect to an amplifier without a phono stage. Select Phono Out if you have an amplifier with a phono stage. Enjoy the warmth of vinyl with the comfort of wireless technology.
Possible set: Pro-Ject Speaker Box 5 (bookshelf speaker) and
Pro-Ject Stereo Box S2 (smallest audiophile integrated amp).
Connect it E (RCA Cable)
Speaker cable |
Speaker cable |