Pro-Ject Switch Box User Manual

INSTRUCTIONS FOR USE

Pro-Ject Switch Box

Dear music lover,

thank you for purchasing a PRO-JECT AUDIO input expander.

In order to achieve maximum performance and reliability you should study these instructions for use carefully.

Warning of a hazard for the user, the unit or possible misuse.

Important notice.

Connectors

Make all connections whilst the input expander is disconnected from the power supply.

Take care to connect the left and right channels correctly. The right channel is usually marked red,

the left channel black or white.

Outputs

Out has to be connected to the In 2 of the Pro-Ject Pre Box. Out 2 can be used to connect a Pro-Ject

headphone amplifier, like the Head Box II ore the Head Box SE II.

Inputs

Line level sources such as CD player tuner or TV can be connected to the input sockets marked In 2 - In 5.

Trigger

The socket marked Trigger Switch on the Pro-Ject Pre Box provides a trigger signal for the Switch Box. The trigger signal permits automatic synchronization with the input selector of the Pro-Ject Pre Box.

A 30cm long trigger cable is supplied with the Pro-Ject Switch Box for connecting the socket Trigger Switch on the Pro-Ject Pre Box and the socket Trigger on the back of the Pro-Ject Switch Box.

Do not use the trigger input and output for any other connections for which it is not designed.

Mains power connection

The unit is supplied with a power supply suitable for your country's mains supply. Check the label before connecting to ensure compliance with the mains rating in your house. Connect the low voltage plug from the power supply to the Power ~16V socket before connecting the power supply to the mains.

+ 1 hidden pages