INSTRUCTIONS FOR USE
Pro-Ject Remote Box S2
© Pro-Ject Audio Systems · Pro-Ject Remote Box S2 · Revision 2017.5.29
2
Dear music lover,
Thank you for purchasing a Pro-Ject Audio Systems Remote Box S2.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse
Important notice
Safety instructions
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to connect/disconnect the unit from the mains. Make sure that the power supply
is easily accessible at all times. Never handle the device, the power supply while your hands are wet or
damp. Avoid letting liquids enter the device or the power supply. Never place any item containing
liquid, such as a flower vase on or near the device. Never spill any liquid on the device or the power
supply. Never place any naked flame sources, such as lighted candles on or near the device. The product
shall not be used in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar
conditions.
Connectors
External antenna
Connect supplied antenna to the connector on the back side of the unit.
Mains power connection
Connect the low voltage plug from the power supply to the Power 5VDC socket before connecting the power
supply to the mains.
© Pro-Ject Audio Systems · Pro-Ject Remote Box S2 · Revision 2017.5.29
3
Main power switch
The push button on the left hand side of the front panel turns the unit on or back into standby. The blue LED
above the power button indicates the status of the unit:
Bluetooth connection
Pairing with Android devices
Open Settings and tap on Bluetooth. Turn on Bluetooth and tap on Scan. Searched devices will show up.
Tap on Remote Box S2 and confirm presented pairing code on your Android device. Then confirm by
pressing button once the blue LED above button is blinking. Confirm “Pairing” on your Android device.
Older devices may request a pairing code. Enter "0000" and confirm. No more confirmation on
Bluetooth Box S2 is then needed.
Bluetooth pairing with Apple® devices
Remote Box S2 is connected automatically to Apple devices. Connection can be checked in
Settings>Bluetooth>My devices
On both Apple and Android application use only one remote box type device (Remote Box S2, MaiA
DS/DS2 in range. Android device need to have a remote box in paired list.
Bluetooth remote control function
IR emitting diodes are located on the front panel of the product. Free view has to be ensured for reliable use
of remote control function.
-Bluetooth connection must be established prior using Remote Box S2 remote control function over
Box control app.
-Bluetooth remote control function is available in Box control app version 1.6.7 (Android) and 1.2.4
(Apple) and higher.
- Connect your device to Remote Box S2 over Bluetooth
- Run Box Control app
-After first start is automatically opened Setup wizard
- in the first step (Select your Devices) select Remote Box S and confirm with "Next"
(- in following steps select Media libraries, Media players if availbale and always confirm with "Next")
- in the last step (Select your Remote Controls) select remotes which you want to have in the app. Confirm
with "Next"
Pro-Ject devices uses the same remote control for more similar products. E.g. select Pre Box RS digital
from the list to control Pre Box DS2 Digital
- to add more remotes open "Settings" > "Remotes" and choose desired remotes
© Pro-Ject Audio Systems · Pro-Ject Remote Box S2 · Revision 2017.5.29
4
Once remotes are confirmed, you can use your device for control of the selected products.
© Pro-Ject Audio Systems · Pro-Ject Remote Box S2 · Revision 2017.5.29
5
Learning function
lock symbol in the upper left corner next to the name of the remote allows or denies to change a command of
existing Pro-Ject remote. Short tap lock or unlock the remote. When unlocked, long tap allows to learn new
command, simply follow the step on display.
Pre-programmed Pro-Ject remotes can be changed too.
Technical specifications Pro-Ject Remote Box S2
Effective working range: up to 10m (direct visibility)
Bluetooth Profile : SPP, GATT
Frequency: 2402 ~ 2480 MHz
Sensitivity: - 84dBm
Maximum received signal at 0.1% BER: > = -10dBm
Maximum level of inter modulation interference: >= -30dBm
Dimensions W x H x D (D with sockets): 116 x 37 x 103 (108)mm
Weight: 305g
Outboard power supply: 5V/1A
Power consumption: 5V/200mA max.
Service
Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer for
further advice. Only if the problem cannot be resolved there, the unit should be sent to the responsible
distributor in your country.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modification or changes to any part of the product by unauthorized persons release the
manufacturer from any liability over and above the lawful rights of the customer.
Copyright, trademarks
Pro-Ject Audio Systems is a registered Trademark of
H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems
Copyright © 2017. All rights reserved.
The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.
Bluetooth® is a trademark owned by the Bluetooth SIG, Inc., , Microsoft®, Windows®, are either registered
trademarks or trademarks of Microsoft Corporation, Apple is registered trademark of Apple Inc., Android™ is
a trademark of Google Inc.
Loading...