Page 1
PRODUCT INFORMATION
Pick it S2 MM
MM phono cartrige
MSRP 119 € (incl. VAT)
� Moving Magnet principle
� Split pole pins enables frequency responses that com-
pares very well to MC cartridges
� Strong cantilever based on high-end DJ cantilevers
� Suitable for low to medium tonearm masses
� 1/2 inch mounting standard
� High trackability
� Pick it S2 MM should be connected to phono MM inputs
� As with most MM cartridges, stylus may be exchanged
Output voltage at 1000 Hz, 5cm/sec: 7 mV
Frequency response: 20 - 20 000 Hz, +3/-1 dB
Tracking ability at 315 Hz at recommended tracking
force: 70 µm
Stylus type: Special Elliptical
Tracking force, recommended: 1,8 g (mN)
Cartriddge weight: 7,2 g
Recommended load resistance: 47 kΩ
Recommended load capacitance: 150 - 300 pF
PRO-JECT AUDIO SYSTEMS
www.project-audio.com
Technical data and price changes reserved.
Page 1/2
Page 2
PRODUCT INFORMATION
The Pro-Ject Pick it S2 MM is manufactured by the car-
tridge experts at Ortofon and voiced by the design team
at Pro-Ject. It is equipped with a special elliptical stylus
tip. It provides detailed sound reproduction and expansi-
ve imaging. It is a no-nonsense performer with fascina-
ting musical resources. Attached to a strong cantilever,
used in DJ cartridges, this cartridge will not just sound
great, it is also very strong.
The cartridge is made from a unique combination of tech-
nologies. Among others Ortofon‘s well known split pole
pins. This enables it to have a at frequency response,
which compares with MC cartridges. The superior treble
output provides a dynamic and warm sound.
Inspired by the diamond found on the stylus, the Pick it
S2 MM is a beautiful design featuring a new and unique
semi-transparent grey color. It goes perfectly with most
Pro-Ject record players.
PRO-JECT AUDIO SYSTEMS
www.project-audio.com
Technical data and price changes reserved.
Page 2/2
Loading...