Pro-Ject Dock Box Vi User Manual

INSTRUCTIONS FOR USE

Pro-Ject Dock Box Vi

Dear music lover,

thank you for purchasing a PRO-JECT AUDIO iPod docking station Dock Box.

In order to achieve maximum performance and reliability you should study these instructions for use carefully.

Warning of a hazard for the user, the unit or possible misuse.

Important notice.

Connectors

Make all connections whilst the Dock Box is disconnected from the power supply.

Take care to connect the left and right channels correctly. The right channel is usually marked red,

the left channel black or white.

Connection to a power amplifier or active speakers

Connect the Out socket to the pre input on your power amplifier or active speakers.

Turn the Dock Box volume level to minimum before switching on your power amplifier or active speakers.

Connecting to a computer

Connect the USB-output of the Dock Box to a free USB-socket on your computer and turn it on/make sure it is powered on.

When the Dock Box is connected to a computer, all functions of the Dock Box are blocked.

Connection to a TV-set or a beamer

Connect the S-VIDEO socket to a s-video input of your TV-set or beamer.

Fitting and adjustment of the iPod cradle

Use the knurled screw supplied to fix the cradle to the Dock Box chassis. Do not fully tighten the screw yet. Now place your iPod on the Dock Box contacts. Move the cradle so that it supports the iPod and tighten the screw.

Suitable for iPods with 30-pole connector only.

Use without the cradle breaks the 30-pole connector of the Dock Box and the socket of the iPod.

Before connecting the iPod, any sort of cover has to be removed.

Loading the battery

When the Dock Box is connected to the mains power supply, the iPod will start recharging as soon as it is placed on the contacts. Recharging will continue even if the Dock Box is on standby.

Mains power connection

The unit is supplied with a power supply suitable for your country's mains supply. Check the label before connecting to ensure compliance with the mains rating in your house. Connect the low voltage plug from the power supply to the Power ~16V socket before connecting the power supply to the mains.

+ 2 hidden pages