INSTRUCTIONS FOR USE
Pro-Ject Dock Box Fi
Dear music lover,
thank you for purchasing a PRO-JECT AUDIO iPod docking station Dock Box.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
!
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
Connectors
!
Make all connections whilst the Dock Box is disconnected from the power supply.
Take care to connect the left and right channels correctly. The right channel is usually marked red,
!
the left channel black or white.
Connection to the amplifier
Connect the Out socket to a line input (such as AUX) on your amplifier.
Connecting to a computer
Connect the USB-output of the Dock Box to a free USB-socket on your computer and turn it on/make sure it
is powered on.
When the Dock Box is connected to a computer, all functions of the Dock Box are blocked.
Connection to a TV-set or a beamer
Connect the S-VIDEO socket to a s-video input of your TV-set or beamer.
Fitting and adjustment of the iPod cradle
Use the knurled screw supplied to fix the cradle to the Dock Box chassis. Do not fully tighten the screw yet.
Now place your iPod on the Dock Box contacts. Move the cradle so that it supports the iPod and tighten the
screw.
Suitable for iPods with 30-pole connector only.
Use without the cradle breaks the 30-pole connector of the Dock Box and the socket of the iPod.
!
Before connecting the iPod, any sort of cover has to be removed.
Loading the battery
When the Dock Box is connected to the mains power supply, the iPod will start recharging as soon as it is
placed on the contacts. Recharging will continue even if the Dock Box is on standby.
Mains power connection
The unit is supplied with a power supply suitable for your country's mains supply. Check the label before
connecting to ensure compliance with the mains rating in your house. Connect the low voltage plug from the
power supply to the Power ~16V socket before connecting the power supply to the mains.
© Audio Trade GmbH · Pro-Ject Dock Box Fi · Revision 15.10.10/15.12.10
2
Remote control
POWER
ENTER
Blanked out buttons do not carry a function !
MENU
REPEAT
7
8
0
7
8
0
Stepping between tracks, reverse and forward scanning
7
skips to the previous track.
SHUF
9
9
Standby
POWER
turns the unit on or back into standby. The blue LED on the front panel
shows that the unit is powered on.
Start / Pause
8
starts and pauses playback. Press and hold the button stops playback
9
skips to the next track
7
restarts the current track in playback mode
Press and hold the
7
button for reverse scanning, or the button
9
to start forward scanning.
Repeat play
REPEAT
7
starts repeat play for the current track. Pressing the button again starts repeat play for all tracks.
To deactivate repeat play press REPEAT once more.
Shuffle play
SHUF
9
activates and deactivates shuffle play
Navigating the menu
MENU
shows the menu. Returns to the previous step in the menu
and moves the curser up and down, to highlight the requested option.
ENTER
selects or deselects the highlighted option. Shows the next step in the menu.
© Audio Trade GmbH · Pro-Ject Dock Box Fi · Revision 15.10.10/15.12.10
3
Replacing batteries
Proceed as follows:
• Unlock and slide open the battery case cover
• Replace the battery.
Make sure the battery is the right way round !
• Close the battery case cover
Battery type: 1 x CR2032 / 3V or 1 x CR2025 / 3V
Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at
the appropriate collection sites - usually located at supermarkets and drugstores.
Technical specifications Pro-Ject Dock Box Fi
Frequency response: 20Hz - 20kHz
Line-level output: 1 pair RCA/Phono sockets
Output impedance: 15 ohms
Output voltage: 0,300Vrms
USB-output: 5-pole mini-B jack
USB-signal: digital serial data protocol USB 1.1
Operating systems: Windows
Video output: S-video socket
Outboard power supply: 16V/500mA AC, suitable for your country's mains supply
Power consumption: 16V/200mA AC max.. Power consumption is not constant.
It depends on the charging needs of the battery
Replacement battery remote control: 1 x CR2032 / 3V or 1 x CR2025 / 3V
Dimensions W x H x D (D with sockets): 103 x 36 x 103 (109)mm - height plus height of iPod or iPhone
Weight: 585g without power supply
®
und Mac OS
Service
Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer for
further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible
distributor in your country.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modification or change to any part of the product by unauthorized persons release the
manufacturer from any liability over and above the lawful rights of the customer.
Copyright, trademarks
PRO-JECT is a Registered Trademark of H. Lichtenegger.
This guide was produced by: Audio Trade GmbH
Copyright © 2010. All rights reserved.
Windows
®
is a trademark of the Microsoft group of companies.
iPod, iPhone and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.
© Audio Trade GmbH · Pro-Ject Dock Box Fi · Revision 15.10.10/15.12.10
4
Loading...