Pro-Ject Debut Carbon DC Esprit SB User Manual
Product information
12. 2014
Debut Carbon DC Esprit SB
Audiophile „best buy“ 3-speed turntable
33/45 & 78rpm out of the box
Built-in precision Speed Box with switch on upper side
8,6” carbon tonearm
Heavy non resonant acrylic platter
New DC power supply with synchronous AC motor
New TPE motor suspension
Magnetic cartridge 2M red from Ortofon
For 78 playback: remove stylus & exchange to 2M78
(not included, retail price around € 80)
High-gloss black, red or white piano lacquer finish
Speed 33, 45 / 78 (electronic/manual speed change)
Drive principle belt drive
Platter 300mm acrylic platter
Mains bearing stainless steel
Wow & flutter +/- 0,10%
Speed drift +/- 0,80%
Signal to noise - 68dB
Tonearm 8,6” Carbon
Effective arm length 218,5 mm
Effective arm mass 6,0 g
Overhang 18,5mm
Tracking force 10 - 30mN
Included accessories 15 volts DC / 1,6A power supply, dust cover
Power connection 110/120 or 230/240 Volt - 50 or 60 Hz
power consumption 7,4 watt max / < 0,5 watt standby
Dimensions 415 x 118 x 320mm (WxHxD) lid closed
Weight 5,6 kg net
Debut Carbon DC
Esprit SB / 2M red
SRP
499,00 €
The most-wanted audiophile design turntable with carbon tonearm, 3 speeds and DC power supply!
The first Debut turntable, introduced in the late 1990s, was a revolution for the hi-fi industry. For the first time after the arrival of Compact Disc
and the assumed demise of vinyl records, an analogue product re-emerged in the “mass market” – something all music lovers could afford.
The new DEBUT CARBON DC ESPRIT SB has been designed to set new standards in this category for the coming decade – perfectly timed as
analogue today is again a respected source, while the demand for good turntables with all speeds is growing fast!
The CARBON TUBE for the tonearm increases stiffness and decreases unwanted resonance. This material normally is extensively used in highend tonearms, but – because of cost reasons – was never used in products at lower price levels. Together with other improvements like an increase in platter size and weight to realize even smoother rotation, the overall sound quality is greatly improved. The approved belt drive design
offers low noise AC motor with effective motor decoupling (utilising TPE), ultra precision frequency DC-driven AC generator for ultimate speed
stability. Ultimate convenience is achieved, because of electronic speed change („Speed Box“) and the possibility of playing 78rpm.
A simple exchange of stylus to 2M78 (not included) and a drive belt turnover to larger diameter of pulley is required, that´s all!
< playback with standard 2M red stylus (included)
You will need to exchange stylus (2M78), >
for playback of 78rpm records.
(Stylus not included, sold separately for around €80)
PRO-JECT AUDIO SYSTEMS
a division of AUDIO TUNING GmbH
1050 Wien, Margaretenstraße 98,
Update: DZ Datum 22.12.2014
Loading...