Pro-Ject DAC Box DS User Manual

INSTRUCTIONS FOR USE

Pro-Ject DAC Box DS

Dear music lover,

the

The power supply is used to disconnect the unit from the mains. Make sure that the power supply is

supply while your hands are wet or

Avoid letting liquids enter the device or the power supply. Never place any item containing liquid, such as a flower vase on or near the device. Never spill any liquid on the device or the power

be used in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar

except the connection to the computer

, whilst the unit is disconnected from

to the mains and switch it on before connecting it to the

computer

marked red,

thank you for purchasing a Pro-Ject Audio Systems DAC Box DS. In order to achieve maximum performance and reliability you should study these instructions for use carefully.

Warning of a hazard for the user, the unit or possible misuse.

Important notice.

Safety instructions

AC outlet voltages vary from country to country. Before connecting to the mains, make sure that voltage in your area meets the voltage requirements printed on the power supply.

easily accessible at all times. Never handle the device, the power damp.

supply. Never place any naked flame sources, such as lighted candles on or near the device. The product shall not conditions.

Connectors

Make all connections, the power supply. Connect the unit

Take care to connect the left and right channels correctly. The right channel is usually the left channel black or white.

Never use any other power supply than the one supplied with the unit.

Connection to the amplifier

Connect the Out socket to a line input (such as AUX) on your amplifier.

Inputs

Sources with an digital output such as a CD player can be connected to the digital inputs (coaxial and optical). A computer can be connected to the USB input.

+ 3 hidden pages