Smart Surge Protector (SSP)
SSP-30X & SSP-50X
Instruction Manual
SSP-30X
SSP-50X
ProgressiveIndustries.net | 919-267-6964
2
INSTRUCTION MANUAL: SMART SURGE PROTECTOR (SSP)
Instructions
SPECIFICATIONS:
Model SSP-30X SSP-50X
Rated: 120V 120/240V
Joule Rating: 825J 1,650J
Surge Amps: 22,500 45,000
Response Time: <1 Nano Seconds <1 Nano Seconds
FEATURES INCLUDE:
• (3) color LED
indicator lights
• Weather resistant
• Dual line polarity
tester (SSP-50X only)
• Pull handle on plug
• Limited lifetime warranty
• It’s portable, just plug it in
INSTALL STEPS:
STEP 1: Plug Smart Surge Protector into AC power. DO NOT plug in your RV at this
time. Verify GREEN surge indicator LED(s) is on.
STEP 2: Verify which LED’s come on.
A
B
C
D
Your Smart Surge Protector will continue to work during any of the wiring conditions;
however, only the Correct Wiring condition (both GREEN & BLUE LED’s on) is optimal
and any other wiring condition should be corrected by Campground Maintenance
before use.
STEP 3: Plug in your RV power to the Smart Surge Protector. Refer to STEP 2 above for
surge protection wiring conditions.
The Correct Wiring condition occurs when both the GREEN and
BLUE LED’s are on If this does not occur you may be experiencing one
of the other three (3) Wiring Conditions as noted in the diagrams:
Reverse Polarity
Open Neutral
Open Ground
Loading...