Progressive Industries ADT-230 User Manual

Progressive Industries, Inc.

Operating Instructions for:

Model ADT-230

Rated at 120V/240V/50A

Manufactured by:

Progressive Industries, Inc.

414B Airport Boulevard

Morrisville, NC 27560

[phone]

www.progressiveindustries.net

Proudly manufactured i n t he U.S.A.

WARNINGS

Never plug your ADT-230 into power before testing both receptacles
with a circuit tester.

The ADT-230 will not operate on a GFCI circuit and requires two
separate circuits.

Do not exceed the rating of the ADT-230 for any reason.

Do not modify the ADT-230 in any way. This will void the warranty
and could result in possible shock and/or fire hazard.

It is important to always check the pedestal power outlet for charring.
This condition means that the AC receptacle is providing a weak
connection. DO NOT USE!

When running extension cords from the RV to AC power, always use
appropriate-sized cable. Make sure that the cable is rated for outdoor use
to reduce the risk of electrical shock. Small gauge cable will have a
higher resistance resulting in voltage loss, plus it may result in an
electrical fire.

ADT-230

The ADT-230 can be used on two 30 amp receptacles OR you can
add another adapter and plug into two 20 amp receptacles.

Progressive Industries Warr an t y

Progressive Industries warrants its products are free from defects in
materials and workmanship for a period of one (1) year. This is in lieu of
all other warranties, obligations or liabilities expressed by the company.
In the event that a properly installed ADT-230 proves defective under
normal use, Progressive Industries will repair or replace the ADT-230 at
its discretion .

For Technical Support, please call [phone]. In order for the on­call Technician to troubleshoot the problem(s) you are experiencing and
render the best possible solution, it is necessary that you be at your RV
when you place your call.

The address below is strictly a mailing address. Please do not attempt to
visit our facility during business hours as the company is not staffed, nor
equipped to handle on-site repair work. All returns must be routed
through Technical Support.

Progressive Industries, Inc.

414-B Airport Boulevard

Morrisville, North Carolina 27560

The unit being returned must be properly packaged with the postage paid
and include the following information:

1) Date of purchase.

2) A detailed explanation of the problem/defect.

3) Your name

4) Return address and phone number

Progressive Industries cannot assume responsibility for acts of God,
alterations, shipping/handling, or any factors not under the control of
Progressive Industries.

Progressive Industries has no responsibility for installation, personal
injury, property damage, incidental, contingent, or consequential
damages or allow disclaimers, modifications or limitations on how long a
warranty lasts; therefore, the above warranties may not apply to you.
This warranty gives you certain legal rights, and you may have other
rights, which may vary from state to state.