Page 1
ASSEMBLY INSTRUCTION
Remove the wooden knob and change to
Item No : P107-23
Description : DRAWER DRESSER
I M P O R T A N T N O T E :
Place all wooden parts on a clean and smooth surface such
as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials,including staples & packing
straps before you start to assemble.
Do not tighten all screws / bolts until all completely assembled.
Keep all hardware parts out of reach of children.
PARTS LIST
NO DESCRIPTION
1
DRAWER DRESSER
QTY
1PC
NO DESCRIPTION
HARDWARE LIST
A
METAL KNOB HANDLE
B
SCREW 5/32 X 25mm
NOTE : YOU WILL ALSO NEED A PHILIP SCREW DRIVER (NOT PROVIDED)
1
Re assembled knob handle from
inside to outside position.
OPTIONAL :
IF WANT TO USE METAL KNOB
HANDLE.
QTY
12PCS
12PCS
MADE IN MALAYSIA
B
A
metal knob handle.
Loading...