TY-05-30 / TY-05-40 / TY-05-50
User Manual
Contents
Caution/Liability
Dimensions in Inches
Specifications
Electronics Hardware
Assembly Instructions
Page 2
Page 3
Page 3
Page 4
Page 5-7
Caution
Do not open any of the components - the linear actuator, control box or remote.
Make sure no obstacles are in the lift's path.
Make sure the lift is not touching any walls.
Make sure all cords are appropriate length to
accommodate the change in height.
Keep children away from electric TV lift, control units and remotes.
There is a risk of injury and electric shock
Keep all electrical components away from liquids.
Do not sit or stand on the TV lift.
Do not crawl or lie under the TV lift.
There is a danger of electric shock.
This product is designed with a duty cycle of 10%
(2 min. on, 18 min. off).
Liability
The height adjustable TV lift contains electric motors and is designed for dry areas only.
The TV lift is adjustable so that it can be positioned at the most ergonomically suitable height.
Any other use is at user's risk.
Under no circumstances does the manufacturer accept warranty claims or liability claims for
damages caused from improper use or handling of the TV lift.
2
Dimensions in Inches
12.5 + Stroke Length
+ Stroke Length
35" for a 30" stroke
45" for a 40" stroke
Specifications
Model:
TV Maximum Height:
Wall Mount Measurements:
Stroke Length:
Weight:
Speed at Full Load:
Static Load
Dynamic Load
Input Voltage:
Output Voltage:
Overload Protection:
Duty Cycle:
Limit Switch:
IP Grade:
Operational Temperature:
Certification:
Control Options:
TY-05-30 TY-05-40
30" Stroke = 30" Tall
700mm x 500mm
30"
25.5 lbs
10% (2 minutes on, 18 minutes off)
Built-in, non-adjustable and externally mounting
40" Stroke = 40" Tall
-26ºC to +65ºC (-15ºF to 150ºF)
Wired and wireless
700mm x 700mm
40"
38.5 lbs
0.9"/sec
110 lbs
140 lbs
110 - 220 VAC
24VDC
Fused
IP20
CE and RoHS
TY-05-50
50" Stroke = 50" Tall
700mm x 1200mm
50"
40.3lbs
3
Electronics
Control Box
x 1
Hardware
Track Linear Actuator
x 1
Support Column
x 1
Wireless Remote
x 1
Ceiling Cover Brackets
x 2
TV Mounting Brackets
x 4
Rocker Switch (Wire 35")
x 1
Actuator Mounting Bracket
x 1
TV Support Arms 30"
x 2
External Limit Switch (Wire 60")
x 1
Ceiling Cover
x 1
TV Support Arms 36"
x 2
Purpose Name Quantity
P1 Ceiling Cover
Brackets
P2 Ceiling Cover
Brackets
P3 TV Support Arm
P4 TV Mounting Bracket
P5 Support Column
(middle)
P5 Support Column
(outside)
P6 Actuator Mounting
Bracket
Hex Bolt M8x18
Nut M8
Flat Washer M8
Phillips Countersunk
Screw M5x12
Nut M5
Flat Washer M5
Hex Bolt M8x12
Nut M8 (spare parts)
Flat Washer M8
Thumb Screw M5
Phillips Countersunk
Screw M8x12
Hex Bolt M10x25
Locking Washer M10
Flat Washer M10
Hex Bolt M6x25
Locking Washer M6
Flat Washer M6
Clevis Pin
Cotter Pin 1
4
4
4
4
4
4
4
4
4
4
4
2
2
2
4
4
4
1
4
Assembly Instructions
Tools needed: philips screwdriver, 5mm allen key,
6mm allen key, 8mm allen key, 8mm socket, 13mm
socket
Use the four M8x12 Phillips Countersunk Screws
1
from bag P4 to mount the TV Mounting Brackets to
the back of your television. Please be aware that
the supplied screws may not fit your television.
Ensure that you have the appropriate TV mounting
screws before continuing. Tighten until secure.
Use the four M5x12 screws, nuts and washers
3
from bag P2 to attach the Ceiling Cover to the
Ceiling Cover Brackets. Tighten until secure.
Use the four M8x12 bolts, nuts and washers
2
from bag P3 to attach TV Support Arms to the
Support Column. Either the 30” or 36” TV
Support Arm can be used depending on which
width suits the installed TV. Tighten until secure.
Use the four M8x18 bolts, nuts and washers from bag P1
4
4
to mount the assembled Ceiling Cover to the Support
Column. Tighten until secure.
5
Assembly Instructions
Use the Actuator Mount Bracket, Clevis Pin and Cotter Pin
5
from bag P5 to mount the top portion of the Track Linear
Actuator to your installation. The bottom portion comes with an
attached bracket for installation. The wood screws shown in the
diagram are not included. Tighten until secure.
Now that your Drop Down TV Lift is assembled you can attach
7
your TV Mounting Brackets to the TV Support Arms using the
four M8x12 screws. Tighten until secure.
For this step we recommend having at least two people. From
6 8
bag P6, use the four M6x25 bolts and washers for the smaller
holes on the outside and the two M10x25 bolts and washers for
the middle holes to mount the assembled Support Column to
the Track Linear Actuator. Install all of the bolts before
tightening to ensure proper alignment.
Your Drop Down TV Lift is now fully assembled and ready for
use.
6
Assembly Instructions
Pairing the Wireless Remote
9
Pairing the wireless remote is required before use.
• Press and hold the UP and DOWN buttons on the wireless
remote while simultaneously pressing the button on the
side of the control box for 10 seconds.
The TV lift will raise after the remote pairing has been completed.
10
Changing Travel Functionality
To change the wireless remotes travel function from
Momentary to Non-Momentary, hold the COM button for
approximately 10 seconds.
External Limit Switch
11
Please keep in mind this procedure is completely optional
and does not need to be set up in order for the TV Lift to
operate. The external limit switch stops the lift from moving
once it is pressed. Please note that the external limit switch
will only operate in the extending direction.
Install the switch in a way that it will be pressed while the
lift is moving up and right before the ceiling cover touches
the ceiling.
Have any queries? Our expert engineers are here to help!
Progressiveautomations.com
sales@progressiveautomations.com1-800-676-6123
7
Loading...