HOW TO ORDER
1.800.676.6123
sales@progressiveautomations.com
www.progressiveautomations.com
DROP DOWN tv Lift (TY-05)
PRODUCT MANUAL
PAGE 1
Dynamic Load:
TV Maximum Height:
Wall Mount Measurements:
Speed at Full Load:
Input Voltage:
Output Voltage:
Stroke Length:
Weight:
Overload Protection
Duty Cycle
Limit Switch
IP Grade
Operating Temperature
Certification
Control Options
speCifiCAtioNs:
diMeNsioNs iN iNChes
140 lbs
30" Stroke = 30" Tall
700mm x 500mm
0.9"/sec
120 VAC 60 Hz
24 VDC
30"
25.5 lbs
Fused
10% (2 minutes on, 18 minutes off)
Built-in, non-adjustable and externally mounted
IP20
-26ºC~+65ºC (-15ºF~150ºF)
CE and RoHS
Wired and Wireless
HOW TO ORDER
1.800.676.6123
sales@progressiveautomations.com
www.progressiveautomations.com
DROP DOWN tv Lift (TY-05)
PRODUCT MANUAL
12.5 + Stroke Length
+ Stroke Length
35.00 for 30" Stroke
page 2
ELECTRONICS
hArdwAre (continued on next page)
Control Box
x 1
Wireless Remotes
x 2
Rocker Switch
x 1
External Limit Switch
x 1
Track Linear Actuator
x 1
Support Column
x 1
Ceiling Cover Brackets
x 2
Actuator Mounting Bracket
x 1
TV Mounting Brackets
x 4
Ceiling Cover
x 1
TV Support Arms 30"
x 2
HOW TO ORDER
1.800.676.6123
sales@progressiveautomations.com
www.progressiveautomations.com
DROP DOWN tv Lift (TY-05)
PRODUCT MANUAL
TV Support Arms 36"
x 2
page 3
HOW TO ORDER
1.800.676.6123
sales@progressiveautomations.com
www.progressiveautomations.com
DROP DOWN tv Lift (TY-05)
PRODUCT MANUAL
hArdwAre
Purpose Name Quantity
P1 Ceiling Cover
Brackets
Hex Bolt M8x18
4
Nut M8
4
Flat Washer M8
4
P2 Ceiling Cover
Brackets
Phillips Countersunk
Screw M5x12
4
Nut M5
4
Flat Washer M5
4
P3 TV Support Arm Hex Bolt M8x12
4
Nut M8 (spare parts)
4
Flat Washer M8
4
P4 TV Mounting Bracket
Thumb Screw M5
4
Phillips Countersunk
Screw M8x12
4
P5 Support Column
(middle)
Hex Bolt M10x25
2
Locking Washer M10
2
Flat Washer M10
2
Hex Bolt M6x25
4
Locking Washer M6
4
Flat Washer M6
4
P6 Actuator Mounting
Bracket
Clevis Pin
1
Cotter Pin 1
P5 Support Column
(outside)
page 4
Use the four M8x12 Phillips Countersunk Screws from bag P4 to
mount the TV Mounting Brackets to the back of your television.
Please be aware that the supplied screws may not fit your
television. Ensure that you have the appropriate TV mounting
screws before continuing. Tighten until secure.
Use the four M8x12 bolts, nuts and washers from bag P3
to attach TV Support Arms to the Support Column. Either
the 30” or 36” TV Support Arm can be used depending on
which width suits the installed TV. Tighten until secure.
1 2
HOW TO ORDER
1.800.676.6123
sales@progressiveautomations.com
www.progressiveautomations.com
DROP DOWN tv Lift (TY-05)
PRODUCT MANUAL
Tools needed: philips screwdriver, 5mm allen key, 6mm
allen key, 8mm allen key, 8mm socket, 13mm socket
page 5
Use the four M8x18 bolts, nuts and washers from bag P1
to mount the assembled Ceiling Cover to the Support
Column. Tighten until secure.
3 4
HOW TO ORDER
1.800.676.6123
sales@progressiveautomations.com
www.progressiveautomations.com
DROP DOWN tv Lift (TY-05)
PRODUCT MANUAL
use the four M5x12 screws, nuts and washers from bag P2 to
attach the Ceiling Cover to the Ceiling Cover Brackets. Tighten
until secure.
page 6
5 6
HOW TO ORDER
1.800.676.6123
sales@progressiveautomations.com
www.progressiveautomations.com
DROP DOWN tv Lift (TY-05)
PRODUCT MANUAL
Use the Actuator Mount Bracket, Clevis Pin and Cotter Pin
from bag P6 to mount the top portion of the Track Linear
Actuator to your installation. The bottom portion comes with
an attached bracket for installation. The wood screws shown
in the diagram are not included. Tighten until secure.
For this step we recommend having at least two people. From
bag P6, use the four M6x25 bolts and washers for the smaller
holes on the outside and the two M10x25 bolts and washers
for the middle holes to mount the assembled Support
Column to the Track Linear Actuator. Install all of the bolts
before tightening to ensure proper alignment.
page 7
Now that your Drop Down TV Lift is assembled you can attach
your TV Mounting Brackets to the TV Support Arms using the
four M8x12 screws. Tighten until secure.
Your Drop Down TV Lift is now fully assembled and ready for use!
7 8
HOW TO ORDER
1.800.676.6123
sales@progressiveautomations.com
www.progressiveautomations.com
DROP DOWN tv Lift (TY-05)
PRODUCT MANUAL
page 8
To program the wireless remote for the control box, press and hold the
reset button on the side of the control box. While the reset button is
held, press either the up or down button on the wireless remote once.
The reset button can now be released and the wireless remote is ready
for use.
Please keep in mind this procedure is completely optional and does
not need to be set up in order for the TV Lift to operate. The external
limit switch stops the lift from moving once it is pressed.
Install the switch in a way that it will be pressed while the lift is
moving up and right before the ceiling cover touches the ceiling.
OPERATIONAL PROCEDURES
Programming Wireless Remotes
9
External Limit Switch
11
Lift Operation
Before operation please ensure that there are no
obstructions in the path of the TV Lift. Once the wireless
remotes are programmed to the control box, the wireless
remote can be used for non-momentary operation. Press
the up button once to move the lift up and press the up
or down button to stop. To move the lift down, press the
down button once and press the down or up button to
stop.
If you'd like momentary control then use the optional
Rocker Switch. To use it, simply plug it into the control
box and hold ‘2’ on the Rocker Switch to move the lift up
and hold ‘1’ to move the lift down.
10
HOW TO ORDER
1.800.676.6123
sales@progressiveautomations.com
www.progressiveautomations.com
DROP DOWN tv Lift (TY-05)
PRODUCT MANUAL
Rocker Switch
Limit Switch
Actuator
Reset Button
Loading...