PA-35
User Manual
Contents
Specifications/Dimensions
Basic Setup
Security Settings
App Layout and Control
Recording Presets
Page 2
Page 3-4
Page 5
Page 6
Page 7-8
Specifications
Control Ability
Input Voltage
Output Voltage
Current
Number of Channels
Kit Includes
Special Feature
Remote Functions
Size (L x H x W)
Weight
Warranty
Dimensions
4 Channel Individual/Parallel Control
12VDC
12VDC
10A Max Per Channel
4
1 Control Box, 5 Connectors
Wi-Fi Control va Android/iPhone
Up, Down, Pause (Momentary & Non-Momentary)
6.2" x 1.6" x 3.2"
0.8 lbs
18 Months
5.6"
3.2"
0.9"
1.9"
6.2"
0.5"
Ø0.6"
1.6"
1.0"
2.2"
3.2"
2
Basic Setup
Attach actuator wires to the connector wires you received with your Wi-Fi Control Box. Red
connects with Black, Black connects with Red. When connecting power, connect the positive
wire to red and the negative wire to black wire. If you connect your actuators’ leads backwards,
this will not harm the unit but the up and down buttons will be reversed. Connecting the power
backwards can damage the control box. The button closest to the LED is the Reformat button.
If you need to reformat hold button for 30 seconds. The button farthest from the LED is the
Reset button
Attach your connectors to the Wi-Fi Control Box.
Power on your control box. You will see three lights on the box turn red in sequence. Power,
Outgoing Wi-Fi and Wi-Fi Connectivity:
·The Power light will turn red when the box is receiving power.
·The Outgoing Wi-Fi light will turn red when the box is transmitting a Wi-Fi signal.
·The Wi-Fi Connectivity light will turn red once you have successfully connected to Wi-Fi
with your Android or IOS device.
Using your phone/tablet, connect to the network labelled HF-A11x_AP. Once connected,
open your browser. Using your browser, insert 10.10.100.254 in the address field. Press
Enter. You will see a login screen asking for your Username and Password.
3
Basic Setup
Both the Username and the Password for the Actuator Controller App are ’admin’. On the next screen,
you may be presented with a different language. To change the language to English, press the ‘English’
button in the top right hand corner. Now you can enable security protection for the Actuator Controller
App. To enable security protection, choose AP Interface Settings from the Home section.
In the section below under Network Name(SSID), you can rename your network something
simple and easy to remember. Click Apply.
You will be directed to a screen that asks you to restart the app. Don’t restart the
app yet! Return to the AP Interface Settings menu.
4
Security Settings
SECURITY SETTINGS
In the Wi-Fi Control Box section, you can select the Security Mode for the app. If you have
experience with Wi-Fi, select the mode that works best for you. If not, you can follow these
steps:
1. Select Security Mode ‘WPA-PSK’ from the menu.
2. Set the WPA Algorithm to TKIP
3. Choose a Pass Phrase that only you know. Write this password down and keep it safe. We
recommend using an 8-digit code.
4. Click Apply.
You will once again be asked to restart the app. Once again do not restart the app just yet.
Navigate to the Device Management screen to change your username and password. Select a
username and password that is secure, write them down and keep them safe.
When you click Apply you will be asked to restart the app.
Click the Device Management link provided. Now click the Restart button.
You will need to reconnect to your newly named network through your phone or tablet.
Once you are connected, you can open the app and use your actuators.
5
App Layout and Control
1. Wi-Fi Signal
The Wi-Fi Signal Strength indicator tells you how strong your signal to the Wi-Fi Control Box is. Ensure
you have a good signal, otherwise your actuators may not function well.
2. Actuator/Name
This section allows you to name up to four actuators. Click the current name to input a new one. You
have a maximum of 6 characters you can use in this field.
3. Toggle Menu
The toggle menu lets you select from Non-Momentary, Momentary, and Off functions.
4. TOG: The ‘Tog’ selection is for Non-Momentary control of your actuators. Pressing a button while
Non-Momentary is selected will activate your actuators even if you remove your finger from the button.
If you have pressed the ‘Up’ button, pressing the ‘Down’ button will completely reverse the actuator
direction without stopping. If you have pressed ‘Up’, pressing it again will stop the actuator motion.
5. MOM: The ‘Momentary Control’ selection means that for your actuators to move, you will need to
hold down the button for the entire duration of desired movement. Once you release your finger, the
actuator will stop.
6. OFF: The ‘Off’ setting is only used for Multiple Actuator control. Use the ‘Off’ selection when you
do not want control over an actuator.
7. Direction Control
Up and Down direction control is provided for up to four actuators in both momentary and nonmomentary settings.
8. Multiple Actuator Control
Use this setting control all actuators at once. Multiple actuators are controlled with non-momentary
function.
9. Timer Delay
Use a timer delay of up to 999 seconds for your actuators. Each actuator time delay can be set
separately.
10. Record
Up to five presets can be recorded. Each preset has a maximum of 30 minutes of recording time
available.
6
Recording Presets
RECORDING PRESETS
The app features up to 5 recordable presets with 30 minutes of recording time available for each.
The app is designed to run in the background of your Android/iPhone device, but your device
settings may prevent this from working properly.
Step 1
Before starting to record, it is highly recommended that your actuators be in their starting
positions. Ideally, your actuators will be completely retracted before beginning.
Step 2
Once your actuators are in their starting positions, press the record button. Before you can record,
a screen will prompt you to make sure your actuators are in the retracted position. If they are, click
‘Continue’.
Step 3
Create the actuator motions you want to record
7
Recording Presets
Step 4
Before pressing the stop button, it is recommended that you return your actuators to their starting
positions. This will prevent you from having to return them manually.
Do not press the ‘stop’ button while your actuators are still in motion. Your actuators will continue to
move if they are in motion while the ‘stop’ button is pressed
Step 5
After the button is pressed you will be asked to name your preset.
Step 6
To access your presets, press the Progressive icon in the top left corner. Your preset will show as the
name you chose. Select your new preset to play the recording. To return to manual control, press the
Progressive icon and select ‘Manual Control’.
8
Loading...