ProForm SpaceSaver 700 PFIVEL74313.0, Space Saver 700 User Manual

USERʼS MANUAL
Visit our website
www.iconsupport.eu
Model No. : PFIVEL74313.0 Serial No ___________
CAUTION
Read all precautions and instruc­tions in this manual before using this equipment. Keep this manual for future reference.
QUESTIONS ?
If you have questions, or if there are missing parts, please contact us:
UK Call: 08457 089 009 From Ireland: 053 92 36102
Website: www.iconsupport.eu
E-mail: csuk@iconeurope.com
Write:
ICON Health & Fitness, Ltd. c/o HI Group PLC Express Way Whitwood, West Yorkshire WF10 5QJ UK
Write the serial number in the space above for reference.
Serial number decal
2
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS
. . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO PLUG THE POWER ADAPTER. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
HOW TO OPERATE THE ELLIPTICAL
. . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
FEATURES OF THE CONSOLE . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
MAINTENANCE AND TROUBLESHOOTING. . . . . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
EXERCISE GUIDELINES . . . . . . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
EXPLODED DRAWINGS.. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
NOTES . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ORDERING REPLACEMENT PARTS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Last Page
3
IMPORTANT PRECAUTIONS
WARNING : To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your elliptical before using your elliptical. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
1. Before beginning any exercise program, con­sult your physician. This is especially important for persons over age 35 or persons with pre­existing health problems.
2. Use the elliptical only as described in this manual.
3. It is the responsibility of the owner to ensure that all users of the elliptical are adequately informed of all precautions.
4. The elliptical is intended for home use only. Do not use the elliptical in a commercial, rental, or institutional setting.
5. Keep the elliptical indoors, away from mois­ture and dust. Place the elliptical on a level sur­face, with a mat beneath it to protect the oor or carpet. Make sure that there is at least 3 ft. (0.9 m) of clearance in the front and rear of the elliptical and 2 ft. (0.6 m) on each side.
6. Inspect and properly tighten all parts regu­larly. Replace any worn parts immediately.
7. Keep children under age 12 and pets away from the elliptical at all times.
8.The elliptical should not be used by persons weighing more than 250 lbs. (115 kg).
9. Wear appropriate clothes while exercising; do not wear loose clothes that could become caught on the elliptical. Always wear athletic shoes for foot protection while exercising.
10. Hold the handlebars or the upper body arms when mounting, dismounting, or using the el­liptical.
11. The pulse sensor is not a medical device. Various factors may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general.
12. The elliptical does not have a freewheel; the pedals will continue to move until the ywheel stops. Reduce your pedaling speed in a con­trolled way.
13. Keep your back straight while using the el­liptical; do not arch your back.
14. Over exercising may result in serious injury or death. If you feel faint or if you experience pain while exercising, stop immediately and cool down.
4
BEFORE YOU BEGIN
Thank you for purchasing the ProForm® Space Saver 700. The elliptical provides an array of fea­tures designed to make your workouts at home more effective and enjoyable.
For your benet, read this manual carefully be­fore you use the elliptical. If you have questions
after reading this manual, please see the front cover of this manual. To help us assist you, note the product model
number and serial number before contacting us. The model number is
PFIVEL74313.0
and the loca­tion of the serial number decal are shown on the front cover of this manual. Before reading further, please familiarize yourself with the parts that are labeled in the drawing be­low.
115 Kg
115 Kg
115 Kg
ENGLISH
115 Kg
WARNING DECAL PLACEMENT
This drawing shows the location(s) of the warning decal(s). If a decal is miss­ing or illegible, call the telephone num­ber on the front cover of this manual and request a free replacement decal. Apply the decal in the location shown. Note: The decal(s) may not be shown at actual size.
5
NO 52*4 NO 57*4 NO 58*4 NO 59*4
NO 46*2 NO 49*2 NO 50*2
NO 100*2
NO 116*1
NO 13*6 NO 14*6 NO 15*6 NO 115*2
NO 36*2 NO 13*2 NO 40*2
NO 3*2 NO 13*2 NO 30*1 NO 22*3
PFIVEL74313.3
伞头内六角 M8*110100*2
伞头内六角 M8*7030*1
伞头内六角 M8*853*2
伞头内六角 M10*9046*2 马车螺丝 M8*7536*2
马车螺丝 M6*5552*4
伞头内六角 M8*2015*6
华司 Φ6*Φ14*2T57*4
弹垫 Φ814*6
弹垫 Φ658*4
弧形华司 Φ8*Φ19*1.5T13*10
华司 Φ10*Φ19*2T49*2
内六角扳手 5mm115*2
圆花旋钮 M659*4 开口扳手(116*1
尼帽 M1050*2尼帽 M822*3
袋帽 M840*2
ASSEMBLY
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tool(s), assembly requires an adjustable wrench and a Phillips screwdriver .
Use the part drawings below to identify the small parts used in assembly. The number in parenthe­ses below each drawing refers to the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled.
6
STEP 1
Fasten front stabilizer (35) with 2 carriage bolts (36) from the underside of stabilizer. Secure with 2 curved washers (13), 2 cap nuts (40). Fasten Rear stabilizer (101) with 2 allen bolts (100).
Remove the Front main frame welding(33),keep the entire main frame horizontally.
Using Bolt (95) into the busing ,to keep the main frame assemble tightly.
Attention: Before insert the bolt,Pls to adjust the Knob under the bottom tube to keep it in Horizontal In this way make the bolt inserted smoothly
STEP 2
Carefully lift the Handlebar Post (26) until it is verti­cal.Connect the Upper Computer Cable (31) and the Connecting Wire (32).
Remove the loosely tted Allen bolts (15),spring
(14) and curved washers (13) from the Main Frame and the Handlebar Post (26) into position. Loosely
re-t the 2x M8 Allen Bolt (15), 2 Spring (14) and
2 Curved Washers (13),M8 Allen Bolt(30),M8 Nut (22) and align the Handlebar Post so it is straight then tighten the Allen bolts fully.
101
100
36
35
13 40
14 15 13
22
30
32
31
26
95
7
STEP 3
Slide the lower swing bar Left and Right (21) onto the Rotation Rod (24) and secure using 2 Allen Bolts (18), 2 spring (14), 2 washers (19) and 2 black washers (25) tighten fully.
Fit the upper swing bar Left and Right (11) by slotting them onto the top of the lower swing bar Left and Right (21) and secure in place using 4 Allen bolts (15), 4 spring (14) and 4 curved washers (13), tighten fully.
Fasten footplate support bars(51L+R) to the lower swing bars(21) with Allen bolts (46) and secure it with washers (49) and nuts (50).
Secure plastic cover (16L+R) and (27F+R)onto swing bar and handlebar post with screws (17) separately.
13
14
15
18
14
19
17
27R
27F
11R
11L
51R
51L
50
49
48
47
21R
21L
24
25
17
46
16F 16R
16R
16F
8
STEP 4
Fasten right footplate (60R) with carriage bolts (52) from the right footplate support bar and secure it with washers (57), spring (58) and knobs (59) tightly. Do the same for the left pedal.
STEP 5
Secure Handle Bar (23L+R) with 2xM8Allen Bolt (3),Curved washer (13) and Nut(22).
Connect the upper computer cable (31) and the computer (1). Sit the computer (1) onto its bracket and secure in place using the 4 screws(2) previously removed.
Inset hand pulse cable (9) into the hole on the back of the computer (1)
Now your machine is ready for use.
4 5
1
23R
23L
9
2
3
13
22
58
59
52
60R
57
60L
9
Contacts
HOW TO EXERCISE ON THE ELLIPTICAL EXERCISER
To mount the elliptical exerciser, hold the upper body arms and step onto the pedal that is in the lowest position. Then, step onto the other pedal. Push the pedals until they begin to move with a continuous motion.
Note: The pedal discs can turn in either direction. It is recommended that you move the pedal discs in the direction shown by the arrow; however, for variety, you may turn the pedal discs in the opposite direction.
The upper body arms are designed to add upper­body exercise to your workouts. As you exercise, push and pull the upper body arms to work your arms, shoulders, and back. To focus on lower-body exercise, hold the upper body arms but do not push or pull them as you exercise.
To dismount the elliptical exerciser, wait until the pedals come to a complete stop. Note: The elliptical exerciser does not have a free wheel; the pedals
will continue to move until the ywheel stops.
When the pedals are stationary, step off the highest
pedal rst. Then, step off the lower pedal.
MEASURE YOUR HEART RATE IF DESIRED
You can measure you heart rate using the handgrip pulse sensor.
If there are sheets of clear plastic on the metal contacts on the handgrip pulse sensor, remove the plastic. In addition, make sure that your hands are clean. To measure your heart rate, hold the handgrip pulse sensor with your palms resting against the metal contacts. Avoid moving your hands or gripping the contacts tightly.
When you are nished exercising
If the pedals do not move for several minutes and the buttons are not pressed, the console will turn off and the display will be reset.
HOW TO USE THE ELLIPTICAL
10
HOW TO USE THE ELLIPTICAL
HOW TO FOLD AND UNFOLD THE ELLIPTICAL
When the elliptical is not in use, the frame can be folded out of the way. First, lift the latch under each pedal arm, and lift
the pedal arms off the sleeves on the crank arms. Then, pull the safety pin and leave like that until the elliptical is folded. Raise the pedal arms until they touch the magnets on the upper body arms; the magnets will hold the pedal arms in place. Then, hold the handle and lift the frame until it locks in a vertical position Now, put back the safety pin in its location. To unfold the
elliptical, rst remove the safety pin, then hold the handle,
press the latch button, and lower the frame. Le piston inclus
dans l’appareil permettra au produit de descendre seul en
toute sécurité. Veillez à ne pas mettre vos pieds dessous
l’appareil lorsqu’il s’ouvre.
Next, pull the pedal arms off the magnets on the upper body arms. Then, lift the latches under the pedal arms,
and set the pedal arms on the sleeves on the crank arms. Release the latches, and make sure that the pedal arms are securely connected to the crank arms. Finally, put back the safety pin in its location. You may have to force a bit to have it pulled in in place.
HOW TO MOVE THE ELLIPTICAL
To move the elliptical, rst fold it as described at the left.
Next, stand in front of the elliptical, hold the upright, and place one foot against the center of the front stabilizer.
Pull the upright until the elliptical will roll on the front wheels. Carefully move the elliptical to the desired position, and then lower it.
HOW TO PLUG THE POWER ADAPTER
IMPORTANT: If the exercise elliptical has been
exposed to cold temperatures, allow it to warm to room temperature before plugging in the power adapter. If you do not do this, you may damage the console displays or other electronic components.
Plug the power adapter into the receptacle on the frame of the exercise elliptical. Next, plug the power adapter into the plug adapter. Then, plug the plug adapter into an appropriate outlet that is properly installed in accordance with all local codes and ordinances.
IMPORTANT: The adapter is only needed for the UK market. It is useless for the other markets.
Crank arm
Sleeve
Pedal arm
Latch
Safety pin
Pedal arm
Latch button
Frame
Handle
Magnet
Upright
Place your foot here
Power
adapter
11
Follow your progress with the display. The console shows the following workout information:
Speed—This mode shows your pedaling speed, in revolutions per minute (rpm). Time—This mode shows the elapsed time. Note: When a smart program is selected, the display will show the time remaining in the program instead of the elapsed time. Distance—This mode shows the distance you have pedaled, in total revolutions. Calories—This mode shows the approximate number of calories you have burnt. Pulse—This mode shows your heart rate when you use the handgrip pulse sensor. Level—This mode shows the level of resistance of the pedals.
HOW TO USE THE CONSOLE
Make sure that the product is correctly plug (see page HOW TO PLUG THE POWER ADAPTER page 10). If there is a
sheet of clear plastic on the face of the console, remove it.
1. Turn on the console :
To turn on the console, press any button on the console or simply begin pedaling.
2. Press the buttons : M (MODE) : Press this button to validate the adjusted
values.
UP and DOWN : Slide your nger on the circle to increase
or decrease the values or to set the resistance.
START/STOP : For a quick start : you can start the console without selecting any program. TIme starts counting from 0.
RECOVERY :
Press this button to activate the recovery test (availbale only at the end of a program).
BODY FAT :
Press this button to activate the Body Fat test.
RESET :
Press this button to reset the values.
3. Select a user :
When you will turn on your computer, the word U1 will
ash. Select a user from U1 to U4 by sliding your nger on
the up and down button, then validate by pressing the M button.
Select your prole : man or woman by sliding your nger
on the up and down button, then validate by pressing the M button.
Select your age by sliding your nger on the up and down
button, then validate by pressing the M button. Select your height and weight in the same way.
4. Select a program
Select your program by sliding your nger on the up and
down button, then validate by pressing the M button. Press the START/STOP button to start your program.
5. Start pedaling and follow your progress with the display :
While you exercise, the console will display the selected mode.
6. When you are nished exercising, the console will automatically turn off.
If the pedals do not move for a few seconds, the console
will turn off automatically. At the end of a program you’ll hear a tone and the program will ash.
How to use the Pulse Recovery Test :
It is a function to check the condition of pulse recovery that is scaled from 1.0 to 6.0 while 1.0 means the best and 6.0 means the worst and the increment is 0.1. In order to get rated correctly, users must test it right after
the workout nished by pressing “TEST(RECOVERY) ”
key and then stop exercising. After the key is pressed, please also apply the heart rate detector appropriately, the test will last for 1 minute and the result will show in the display. If the computer does not detect your current heart
rate, pressing “TEST(RECOVERY) ” will not enter into
pulse recovery test. During the pulse recovery test, press
“TEST(RECOVERY) ” to exit the test and return to the
stop status. par minutes (RPM).
Caution : These data have no medical purpose, it just to gives you an approximate idea of your shape after your exercice.
BODYFAT TEST :
1. Turn on the console
To turn on the console, press any button on the console or simply begin pedaling.
CONSOLE FEATURES
12
2. Select a user :
See page 11. Programs shall ash at the top of the
computer.
3. Select the body Fat Test
Press the BODYFAT button. This is a special test
designed to calculate users’ body fat pourcentage (FAT%),
Base Metabolic Rate (BMR), Body Mass Index (BMI) and provide you a body Type.
During the body fat measurement, place both your palms on the contact pads. The test result are:
FAT%: The total body fat in our body measured by
percentage BMI: means Body Mass Index, which is used for body shape building. During the body fat measurement, if your palms do not contact the pulse sensor well, the computer cannot receive any signal and it will display E-1. Press the BODYFAT button to escape then start the test again.
During the test, you cannot exit, nish the test then press
RESET to exit the program.
HOW TO USE THE MANUAL MODE
1. Turn on the console :
To turn on the console,press any button on the console or simply begin pedaling. The entire display will light for a moment; the console will then be ready for use.
2. Select a user :
See page 11. Programs shall ash at the top of the
computer.
3. Select the manual program :
Select the MANUAL program by sliding your nger on the up and down button, then validate by pressing the M button. You can now create your goals based on time, distance, calories, watt or pulse. To do so, press the M button to navigate within the different goals that you wish to set. As soon as the words TIME, DISTANCE,
CALORIES or PULSE ash, slide your nger on the up
and down button, then validate by pressing the M button. Once your goal(s) are set, press the START/STOP button to start your exercice. Note : As soon as you turn on the console, you can press the START/STOP button to start a manual program.
4. Change the resistance of the pedals as desired.
As you pedal, change the resistance of the pedals by pressing the Resistance increase and decrease buttons.
There are sixteen resistance levels. Note: After you’ve
pressed the buttons, it will take a moment for the pedals to reach the selected resistance level.
5. Follow your progress with the display.
The console displays the elapsed time and the distance
you’ve pedaled. Note: When a smart program is selected,
the display will show the time remaining in the program instead of the elapsed time.It also displays your pedaling
speed (in RPM), the calories and fat calories you’ve burnt
and also your heart rate when you use the handgrip pulse sensor.
6. Measure your heart rate if desired. see HOW TO MEASURE YOUR HEART RATE page 9
7. When you are nished exercising, the console will automatically turn to sleeping mode
If the pedals do not move for a few seconds the console will turn to sleeping mode. If the pedals do not move and the console buttons are not pressed for a few minutes, the temperature will appear on the display and then the console will automatically turn off.
HOW TO USE THE PRESET PROGRAMS:
1. Turn on the console:
To turn on the console, press any button on the console or simply begin pedaling. The entire display will light for a moment, the console will hten be ready for use.
2. Select a user :
See page 11.
3. Select a preset program :
Select a preset program by sliding your nger on the up
and down button. Once the word PROGRAM is selected, press the M button to validate. You will then be able to choose one of the 12 preset programs. The word P1 will
ash, slide your nger on the up and down button to select
the program you want.
Note : Programs 2, 3, 7, 11 and 12 being Performance programs and programs 1, 4, 5, 6, 8, 9 and 10 being Endurance programs. Consult a coach for more details on the selection and use of a program.
Press MODE to validate.
3. Entering your data :
You can choose the goal of your workout between : time, distance, calories or pulse. Press the M button until the
value you wish to program is ashing, then use the up
and down button to modify it and press the M button to validate. Do the same to program the other values then press START / STOP to begin the program. For a quick start, directly press the START/STOP button once the program is selected and start pedaling.
USER SETTING PROGRAMS :
1. Turn on the console.
To turn on the console,press any button on the console or simply begin pedaling. The entire display will light for a
13
moment; the console will then be ready for use.
2. Select a user :
See page 11.
3. Select a custom program :
When you turn on the console the word MANUAL appears on the console, press the up and down button to select the custom program you wish then press ENTER to validate.
3. Enter your data
The word TIME will ash, use the up and down button
to select the value then press the M button. The word
DISTANCE will ash use the up and down button to
select the value then press the M button. Do the same for calories and nally press START / STOP to begin the program.
The user is free to modify the values of resistance, there
are 16 levels of resistance. This prole will be saved in the
console after the set up. Once your program is selected
and after having pressed the M button, the rst column start ashing and you can press up and down to increase or decrease the values and create your prole. Press
ENTER to validate the value. You will then be able to adjust the values for the second column and so on. Do the same for the 20 columns. Then, press START/STOP to start.
At the end of the program, you’ll hear a tone and the program will ash.
PROGRAMMES DE CONTRÔLE DE LA FRÉQUENCE CARDIAQUE :
HEART RATE CONTROL PROGRAMS :
1. Turn on the console.
To turn on the console,press any button on the console or simply begin pedaling. The entire display will light for a moment; the console will then be ready for use.
2. Select a user :
See page 11.
3. Select a heart rate program :
Select a heart rate program using the up and down button, once the word TARGET H.R appears on the display, press the M button to validate. Select one of the 4
Heart rate program (55%, 75% ou 90% of your maximum
heart rate or your precise goal TARGET HR). Slide your
nger on the up and down button to select your program,
then press M to validate.
The HRC is calculated as follow : 220- your age. For instance, for a person of 35 years old : 220-35 = 185
pulse/min.
4. Entering your data :
You can choose the goals of your workout between time,
Press the M button so that the values starts ashing, then use the up and down button to modify the value, anlly
press the M button to validate. Do as before to program the other values then press the START / STOP button to start the program. For a quick start, directly press the START/STOP button once the program is selected and start pedaling.
Note : Pay attention when entering your age so that your Max HR % is properly calculated. During the heart rate program, you cannot modify the level of resistance, it will change automatically according to your heart rate goal. Note : Always keep your both hands on the contacts.
14
EXERCISE GUIDELINES
WARNING:
Before beginning this or any exercise pro­gram, consult your physician. This is espe­cially important for persons over the age of 35 or persons with pre-existing health problems. The pulse sensor is not a medical device. Vari­ous factors may affect the accuracy of heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in general.
These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember, proper nutrition and adequate rest are essential for successful results.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your cardiovascular system, exercising at the proper in­tensity is the key to achieving results. You can use
your heart rate as a guide to nd the proper intensity
level. The chart below shows recommended heart rates for fat burning and aerobic exercise.
To nd the proper intensity level, nd your age at the
bottom of the chart (ages are rounded off to the near­est ten years). The three numbers listed above your
age dene your “training zone.” The lowest number is
the heart rate for fat burning, the middle number is the heart rate for maximum fat burning, and the high­est number is the heart rate for aerobic exercise.
Burning Fat—To burn fat effectively, you must exer­cise at a low intensity level for a sustained period of
time. During the rst few minutes of exercise, your
body uses carbohydrate calories for energy. Only af-
ter the rst few minutes of exercise does your body
begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exer­cise until your heart rate is near the lowest number in your training one. For maximum fat burning, exercise with your heart rate near the middle number in your training zone.
Aerobic Exercise—If your goal is to strengthen your cardiovascular system, you must perform aerobic exercise, which is activity that requires large amounts of oxygen for prolonged periods of time. For aerobic exercise, adjust the intensity of your exercise until your heart rate is near the highest number in your training zone.
WORKOUT GUIDELINES
Warming Up—Start with 5 to 10 minutes of stretching
and light exercise. A warm-up increases your body temperature, heart rate, and circulation in prepara­tion for exercise.
Training Zone Exercise—Exercise for 20 to 30 min­utes with your heart rate in your training zone. (During
he rst few weeks of your exercise program, do not
keep your heart rate in your training zone for longer than 20 minutes.) Breathe regularly and deeply as you exercise–never hold your breath.
Cooling Down—Finish with 5 to 10 minutes of
stretching. Stretching increases the exibility of your
muscles and helps to prevent post-exercise prob­lems.
EXERCISE FREQUENCY
To maintain or improve your condition, complete three workouts each week, with at least one day of rest between workouts. After a few months of regular ex-
ercise, you may complete up to ve workouts each
week, if desired. Remember, the key to success is to make exercise a regular and enjoyable part of your everyday life.
15
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Hamstrings, back of knees, and back.
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot toward you and rest it against the inner thigh of your extended leg. Reach toward your toes as far as possible. Hold for 15 counts, then relax. Repeat 3 times for each leg. Stretches: Hamstrings, lower back, and groin.
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place your hands against a wall. Keep your back leg straight and your back
foot at on the oor. Bend your front leg, lean forward and move
your hips toward the wall. Hold for 15 counts, then relax. Repeat 3 times for each leg. To cause further stretching of the achilles tendons, bend your back leg as well. Stretches: Calves, achilles tendons, and ankles.
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and grasp one foot with your other hand. Bring your heel as close to your buttocks as possible. Hold for 15 counts, then relax. Repeat 3 times for each leg. Stretches: Quadriceps and hip muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward. Pull your feet toward your groin area as far as possible. Hold for 15 counts, then relax. Repeat 3 times. Stretches: Quadriceps and hip muscles.
1
2
3
4
5
16
EXPLODED DRAWING—Model No. PFIVEL74313.0
83
82
81
68R
67
66
65
62
14
61
94
93
92
95
91
90
50
43
44
45
41
42
57
58
59
52
1
2
4 5 6 7 8 9 10
12
18
14
19
20
131415
17
24
25
20
26
27F
17
27R
23R
11R
11L
23L
28 29 30
14
15
33
34
35
40
13
38
36
37
49
48
47
46
50
51R
60R
51L
60L
69
70
71
72
73
79
76
75
80
85
84
69
38
99
18
14
68L
Item.115*2
Item.116
21R
21L
77
88
54
55
22
89
110
22
78
31
13
32
64
63
39
25
3
22
97
98
105
106
96
112
113
114
106
106
87
103 104
56
107
13
109
111
96
53
102
101
108
16F
16F 16R
16R
74
100
86
117118
119
17
PART LIST—Model No. PFIVEL74313.0
60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99
100 101 102 103 104 105 106 107 108 109 110
111 112 113 114 115 116 117 118
Description
Footplate (L+R) Allen Bolt M8*30
Washer Φ8*Φ21*2T
Plastic cover 8209
Wave Washer Φ19*Φ23*0.5T Bush Φ19*34*19
End Cap 8209 Tube 8209 Chain Cover(L+R) Drill Screw M5*15 Plastic Cover Plastic Cover Round Cover Self-tapping Screw M4.5*10 Flange Screw M10*1.25
Washer Φ6*Φ14*1.5T
Self-tapping Screw M4*15 Crank Round Metal Plate Belt Wheel 305J6 Allen Bolt M6*10
Wave Washer Φ20*Φ25*0.5T Washer Φ20*Φ25*1T
Bearing Sensor Set Sensor Cable 600mm DC Cable 400mm
Bushing Φ13*5
Hydraulic Cylinder Allen Bolt M8*100
Axis Φ10*42 Oppress Pole Φ37*20.5 Washer Φ10*Φ15*1T Wave Washer Φ10*Φ14*0.5T C-Sharp Clip Φ8
Bolt
Washer Φ8*Φ16*2T
Hydraulic Cylinder Bolt
C-Sharp Clip Φ6
Allen Bolt M8*60 Allen Bolt M8*110 Rear Stabilizer Rear End Cap Rear Handle Main Frame Motor Drill Screw M5*20 Lower Computer Cable 450mm
Washer Φ8*Φ24*0.5T
Wire Front Plastic Cover Rubber Ring
Washer Φ20*Φ25*2T C-Sharp Clip Φ18
Self-tapping Screw M4.5*25 Hexagon Wrench 5mm Combination Wrench Adaptor Cable
Qty.
1 2 2 2 2 4 4 2 1 5 2 2 2 4 2 8 8 2 2 1 4 1 1 2 1 1 1 2 1 1 1 1 2 1 1 1 3 1 1 2 2 1 2 1 1 1 7 1 2 1 1 1 1 1 4 2 1 1 1
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59
Description
Computer Screw M5*12 Allen Bolt M8*85 Computer Rack(L+R) Screw M5*20
End Cap Φ32 “Hand Grip Φ32
Self-tapping Screw M3.5*20 Hand Pulse Cable 500
End Cap Φ32xΦ50
Upper Swing Bar(L+R)
Form Φ32*3T*630mm Curved washer Φ8*Φ19*1.5T Spring Φ8
Allen Bolt M8*20 Center Shaft Plastic Cover Self-tapping Screw M4*15 Allen Bolt M8*20
Washer Φ8*Φ36*3T Nylon Tube Φ19*Φ38
Lower Swing Bar(L+R) Nut M8 Handle Bar Rotation Rod
Washer Φ19.5*Φ38*0.5T
Handlebar Post Central shaft cover(F+R) Screw M5*15 Water Bottle Holder Allen Bolt M8*70 Upper Computer Cable 850mm Connecting Wire 1250mm Front Main Frame welding
Front End Cap Φ65
Front Stabilizer Carriage Bolt M8*75
Tube Φ14.5*86
Knob M8*30(8103)
Bush Φ14.7*31.8*10
Cap Nut M8 Flywheel Belt Chain Adjustable Set Flange Screw 3/8 Axle Cap Allen Bolt M10*90 Bush 14*32
Tube Φ14*72.2 Washer Φ10*Φ19*2T
Nut M10 Footplate Support Bar (L+R) Carriage Bolt M6*55
Spring Φ0.7*6.4*47
Pedal locker Screw M5*12 Rubber pad
Washer Φ6*Φ14*2T Spring Φ6
Round Head Quick Pin M6
Qty.
1 4 2 1 2 2 2 4 2 2 1
2 10 12
6
2 10
4
2
6
1
4
2
1
4
1
1
2
1
1
1
1
1
2
1
2
1
3
2
2
1
1
2
2
2
2
4
2
2
3
1
4
4
2
8
2
4
4
4
18
IInspect and tighten all parts of the exercise cycle regularly.
Replace any worn parts immediately. To clean the exercise cycle, use a damp cloth and a
small amount of mild detergent.
Important: To avoid damaging the console, keep liquids away from the console and keep the console out of direct sunlight.
MAINTENANCE AND TROUBLESHOOTING
19
NOTES
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED
DRAWING near the end of this manual)
IMPORTANT RECYCLING INFORMATION FOR E. U. CUSTOMERS
This electronic product must not be disposed of in municipal waste. To preserve the environment, this product must be recycled after its useful life as required by law. Please use recycling facilities that are authorized to collect this type of waste in your area. In doing so, you will help to conserve natural resources and improve European standards of environmental protection. If you require more information about
safe and correct disposal methods, please contact your local city ofce or the
establishment where you purchased this product.
TECHNICAL SPECS.
Product dimensions : (L x l x h) : 143 x 68 x 153 cm Product weight: 51 Kg
Printed in China © 2013 Icon Health & Fitness, Inc.
Loading...